iam posting the pic can some one tell me how can i fix it with bondo , fiber glass
i dont have tools . so i will go to store and buy stuff .. step by step i need to know which product will go 1rst and what are steps to folow
i know some product name but dont know how to apply then
fiber glass, fiber cloth, fibter patch, bondo hair , bondo , putty

i will be looking farward for the post help me guys ucan see the picture as well

http://www.postyourimage.com/v...07260

That looks too severe for fiberglass and bondo

then u bondo till its even, and paint it

THIS IS GHETTO!!! i never done it but seen a friend done it, it looks good for ghetto job but if u get hit, that thing is gonna dent like a mofo, so do wat u want, or jsut leave it the way it is and go off road with it like me, and get a new car, assume u can

here is another method, CHEAP!!!!! AND GHETOEST u can fix a rust like that, ok wat u do is this:

grind all the rust off, then find a metal sheet, and cut out the shape of the round part of quarter panel and cut it so its 1inch overlap, then again screw it or use jb weld if that holds, then bondo open area and primer seal it and paint it :D

thats my 2 cent, and its ghetto as [freak], so think before u do it, pm me and bm me if u dont like it but jsut trying to help him out on low budge job, so here it is enjoy

Asuming you can;t weld and have no access to a welder, like the previous poster said, get a replacment panel that will overlap by and inch or more. Cut out all the rust until you are SURE you got it all, then seal it with etching primer or POR15. Scews will work, but use panel bonding adhesive (available at any parts store). This stuff is as strong, if not stronger than welding. Best resulst will come from flanging the quater panel so the new panel sits fairly flush, but if you have to you can simply overlap them by and inch or more and hold in place with screws or rivits until the adhesive drys. Some filler and paint and you are good as new.