Problem happened after i installed my skunk2 chamber kit on my 92 hatch. kyb shocks 2.5" skunk2 springs. Here's the story:Got the kit and installed it myself. While installing on the driver side i accidentally pulled out the axle from its boot so had the drive side replaced with a reman. axle from pep boys. Everything other than that the install went smooth. Drove it straight to a place to have it aligned. After i got the car back it was driving dead straight no problems but I have a BAD front end shake.
When I accelerate through 20-40mph the passenger front tire shakes bad. it shakes my entire dash and i feel it through my steering wheel. After 40mph its smooth but you can feel very very slight vibration through the steering wheel. This only goes on while im accelerating.
Ex: If im accelerating from 20-40mph the car is shaking bad, the second i let off the gas its not shaking at all and driving smooth.
I've checked all the ball joints, i double checked all the bolts that are attached to the chamberk it. The adjustment bracket is not loose/sliding around. Im kinda stuck here scratching my head.
Im lost 
Team Shocker! Doin Big things this year!
Team Shocker's Myspace
Camp 1320
Explicit Speed
