Print  Email  Subscribe  RSS  Help
 One small 5 lug question
Author Post

legomytego




Offline

121 posts [98%]
you will never get this
12-10-2007
  One small 5 lug question« » 8:30 PM 5/6/2008 Reply  Edit

i have two sets of 5 lug wheels and i am going to pick up the rest of the conversion friday my question is can i use my brake lines, e-brake cable, shocks, springs or lower control arms from my 4 lug setup ? i ask cause i have koni yellow shocks now and i would like to keep them and yes i searched

i am thinking i can use my yellows if use my my 4 lug lca ? but i wasent sure about the brake lines and all tho thanks.


new name not new to ht been here since 04

Do I consider myself a role model? No but I do believe I am someone everybody should look up to .



madm@nkey




Offline

222 posts [100%]
CA
5-11-2004
 « Re: One small 5 lug question (legomytego)« » 9:22 PM 5/6/2008 Reply  Edit

Sorry for the dumb question, but what car are doing the swap on?

legomytego




Offline

121 posts [98%]
you will never get this
12-10-2007
 « « » 9:38 PM 5/6/2008 Reply  Edit

not a dum at all i should have posted its going on a 2000 integra dc4


new name not new to ht been here since 04

Do I consider myself a role model? No but I do believe I am someone everybody should look up to .


madm@nkey




Offline

222 posts [100%]
CA
5-11-2004
 « Re: (legomytego)« » 8:25 PM 5/7/2008 Reply  Edit

You should be able to reuse the shocks/springs, lower control arms (front & rear), and e-brake cables. I am not 100% sure on the brake lines, but you should be able to.
The only thing you should be swapping out are the rear trailing arms/hubs/brakes and the front knuckles/hubs/brakes; especially on a DC.
I did the same swap on an EM1 and was able to reuse everything except the brake lines.
Good luck with the conversion!

legomytego




Offline

121 posts [98%]
you will never get this
12-10-2007
 « « » 6:59 AM 5/8/2008 Reply  Edit

thanks thats perfect all i needed to no


new name not new to ht been here since 04

Do I consider myself a role model? No but I do believe I am someone everybody should look up to .


legomytego




Offline

121 posts [98%]
you will never get this
12-10-2007
 « « » 1:35 PM 5/8/2008 Reply  Edit

another question do you run the 32mm axle or the 36 ?


new name not new to ht been here since 04

Do I consider myself a role model? No but I do believe I am someone everybody should look up to .


madm@nkey




Offline

222 posts [100%]
CA
5-11-2004
 « Re: (legomytego)« » 2:44 PM 5/8/2008 Reply  Edit

32 mm axle/hub from a CTR.
If your donor car is a CTR or USDM ITR it will have 32 mm axles/hubs.

legomytego




Offline

121 posts [98%]
you will never get this
12-10-2007
 « « » 5:25 PM 5/8/2008 Reply  Edit

yea the donor car has a 36mm setup so i guess its prelude/crv axles right ? thanks man you been more then enough help


new name not new to ht been here since 04

Do I consider myself a role model? No but I do believe I am someone everybody should look up to .

   

» Return to Suspension
Forum Jump
Quick Reply

Powered by ZeroForum 2.1.2b. ©2008 RelyNet, Inc.









Go