Print  Email  Subscribe  RSS  Help
 Need help...
Author Post

Mr. EF




Offline

17 posts [100%]
Northern NJ
1-30-2008
  Need help...« » 2:26 PM 5/5/2008 Reply  Edit

Im painting with an Acrylic Enamel paint and im unsure if i should use a hardener or not...i see that they have hardener for the Acrylic Enamel paint should i get it and what are the ratios for it...thanks

To answer any question i went with this paint because a flatening agent was added to flaten out the paint for a Satin look...

another thing...whats a good filler or etching primer to use with this type of paint...

note i never used Acrylic Enamel before

The brand of the paint is Limco if that does anything...

Thanks H-T

Modified by Mr. EF at 2:33 PM 5/5/2008



thw_goalie




Offline

92 posts [100%]
Calgary AB
11-5-2005
 « « » 1:51 AM 5/6/2008 Reply  Edit

Phone the manufacturer - best way to find out what to use with their paint.

Mr. EF




Offline

17 posts [100%]
Northern NJ
1-30-2008
 « Re: (thw_goalie)« » 7:17 PM 5/6/2008 Reply  Edit

ill give it a try...thanks man

powerflow




Offline

612 posts [99%]
Houston..TX SE..WI
12-16-2003
 « Re: (Mr. EF)« » 9:08 PM 5/6/2008 Reply  Edit

Go to the BASF web site, the mfg of the Limco line. They have all the tech sheets. Limco LC4000 clear does use the LH400 series hardeners, that's odd you were able to buy clear, but didn't have hardener available. I would use Limco or RM Diamont line primers, I've mixed these lines in the past on low end, econo cars. I've cleared over RM Diamont base w/ Limco without any problems for example.


WTB 1996 h22a1 prelude vtec ecu
   

» Return to Paint and Body
Forum Jump
Quick Reply

Powered by ZeroForum 2.1.2b. ©2008 RelyNet, Inc.









Go