Print  Email  Subscribe  RSS  Help
 PLX M300 integration with S300 question
Author Post

blkb18




Offline

753 posts [100%]
Brownstown Ohio
1-12-2005
  PLX M300 integration with S300 question« » 9:27 AM 5/4/2008 Reply  Edit

I am running 96 GSR with JRSC, tuned with a Hondata S300 obd2 socketed p28. I plan to only running the wideband sensor so I need just to connect the white wire to an input. Everyone says to use the ELD input. Does the p28 not have an ELD input? What are the other options in the pull down menu? Thanks.


2006 NORA DSP Champion
96 DC2 GSR


phearable
Honda-Tech Sponsor



Offline

257 posts [100%]
Tampa Fl
7-21-2007
 « Re: PLX M300 integration with S300 question (blkb18)« » 12:32 AM 5/5/2008 Reply  Edit

The p28 does have an eld.

Take not that you will have to cut out (remove) 2 resistors & disable the eld function in the parameters section to get the input to function properly.

Read the hondata help file.


Phearable.net - Toll Free: 1-888-236-9831
Chipped Ecus / Precision Injectors / Walbro Fuel Pumps / AEM Widebands / Conversion Harnesses
Authorized Dealer for: Hondata, eCtune, Neptune, AEM, Crome & more.

blkb18




Offline

753 posts [100%]
Brownstown Ohio
1-12-2005
 « Re: PLX M300 integration with S300 question (blkb18)« » 9:50 PM 5/5/2008 Reply  Edit

So I can just keep the ELD as is and choose another input for the a/f sensor.


2006 NORA DSP Champion
96 DC2 GSR

ChickenH




Offline

286 posts [100%]
Salt Lake City UTAH
12-22-2006
 « Re: PLX M300 integration with S300 question (blkb18)« » 1:10 PM 5/8/2008 Reply  Edit

If you open the software, you can see on the menu your choices for the input,(where the default one says ELD )all the inputs you can use. Make sure the readings of your widebands voltage output or readout gauge match up to what the hondata says its getting when your done. YOU MIGHT HAVE TO CHANGE VOLTAGE OFFSET.


________________________

but someone will come in and say im wrong now.
1989 CRX SI all motor built b16a hondatas300
2008 ELEMENT SC

kevinz




Offline

174 posts [100%]
Md
9-6-2005
 « Re: PLX M300 integration with S300 question (ChickenH)« » 1:08 PM 5/10/2008 Reply  Edit

eld is d10 on the board,remove r136&r138 on the ecu,very easy, even a person from Melwood could do it.
p28 is obd1

http://technet.ff-squad.com/wiring.obd1.htm


http://www.JDMCARS.com

http://www.justiceracingengines.com/
   

» Return to Engine Management and Tuning
Forum Jump
Quick Reply

Powered by ZeroForum 2.1.2b. ©2008 RelyNet, Inc.









Go