racin jasin R

iTrader: (1)

my freind has a type R
he put down 200hp on a mustang dyno,he wanted to know what slick size and rim combo..he has spoon calpiers.i say 23x8x15,but what rims will fit over the spoon calipers?

thanks..

IT'S ME DAVID

iTrader: (1)

22

MikeySpec

I'd only do a 23 if he's got a shorter final drive. And even then it'd be more about the torque that he's producing.

Quik Chris

I always like the 20" x 14", but I guess that won't work w/ Type R brakes, so 22"

racin jasin R

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MikeySpec &raquo;</TD></TR><TR><TD CLASS="quote">I'd only do a 23 if he's got a shorter final drive. And even then it'd be more about the torque that he's producing.</TD></TR></TABLE>
his fd is 4.7 itr tranz..

racin jasin R

iTrader: (1)

maybe move this to the type R forum..

b18avtec(A!!M0TOR)

i'd try 22"

2fastGSR

4.7 final - i would go 23s

typerman

I am using 22,i cut a mid 1.7 60 consistently check out my launch in the vid below.

Dat1BVtecN

what a coincidence...23

0554

23's

dustin528

definetely 23's with a 4.7. That's what i have.

darrinbrewer

iTrader: (1)

i made 185hp on my gsr motor with ITR tranny, 20x8x14s did me well for 4 yrs, never broke anyhting either.

then i turbo'd the setup and tried them again, way too short of a tire, ran out of 5th gear before the end of the 1/4...lol


since you have to run 15s (if they clear the spoon calipers)

22s would be my choice, 23s if you had too

DA is best

iTrader: (1)

sorry for thread jack but im wondering the same thing but i have a ls with stock tranny exept for clutch and i was wondering what i should go with to? im tryin to hit high 14's with just I,H,E , high flow cat, blox IM, hondata IM gasket, b18b 60mm TB, lighter odyessy/passwordjdm cf relocation battery kit and gutted rear interior and i was wondering if i should go with slicks or drag radials to help me get into the 14's thanks