-the tranny is a 1991 SI
-the electronic VSS i dont know what car it is out of
-the cable VSS is from a 1988-1991 civic/crx
-i have a 1997 Integra GSR cluster
-the electronic vss gear sticks out a slight bit more
- the two gear/shafts are different lengths and therefore are not interchangable

Story:

i tried to convert to electronic, and a friend gave me a spare vss, he didnt know where it came from, so i installed it. i have never been able to get it to work (although the problem was likely wiring)

so i grabbed a cable vss to compare, and when i took the electronic vss out of my tranny it was all chewed up on the tip.

the electronic vss seems to be slightly longer due to a gear spacer behind it rather than in front like the cable vss.

another fault of my is the electronic vss was not properly installed, i dont think i had it in far enough. as a result i may have tightened it slightly cock-eyed and could have caused it to grind on something, hence the mashed gear.

the questions:

will this electronic vss still work?
do i need a new gear?
can i replace the gear?
where can i get a replacement?
how do i install the new replacement?
what is the electronic vss out of?

and any idea what that electronic vss is out of?

*specialzing in import performance*

http://www.honda-tech.com/zerothread?id=2024912

Modified by GSR CRX at 12:28 PM 5/14/2008

http://www.thezcr.com/forums/s...17635

ecu vouches!!
onesixteen eg6low-buck Red_ED8 crxbart ef-hatchcrap si foo obuhmyuh

and the gears were too trashed out to work, i had to get a new one, but it requires no modification to fit.

http://www.thezcr.com/forums/s...17635

ecu vouches!!
onesixteen eg6low-buck Red_ED8 crxbart ef-hatchcrap si foo obuhmyuh

"chuck norris drove a y-49. need i say more?"