|
Jeff @ Tempest
Honda-Tech Sponsor
Offline
13643 posts [100%]
Tempest MD
7-10-2003
|
| « Re: Look at this. will be out sometime this year. (SFWD tC) | « » 1:55 PM 4/2/2008 |
Reply
Edit
|
Any more details? lol
Tempest Racing Online StoreTempest Racing Home Page
|
rota92
Offline
6743 posts [100%]
On Vacation in Canadaland
6-27-2003
|
| « Re: Look at this. will be out sometime this year. (BoostedJeff) | « » 1:59 PM 4/2/2008 |
Reply
Edit
|
It's RWD and made of tubes, what more do you want to know? Sheesh Jeff! 
http://www.internetbrands.com/ib800-692-2200
|
SFWD tC
Offline
181 posts [100%]
Syracuse NY
3-24-2003
|
| « Re: Look at this. will be out sometime this year. (rota92) | « » 2:00 PM 4/2/2008 |
Reply
Edit
|
its going to be AWD.
2007 Scion tC All Motor - 9.46 @ 143 MPH
2006 Scion tC SFWD - 9.96 @ 147 MPH
1999 Chop Top Honda Civic Si Pro Stock - 11.20 @119 MPH
|
rota92
Offline
6743 posts [100%]
On Vacation in Canadaland
6-27-2003
|
| « Re: Look at this. will be out sometime this year. (SFWD tC) | « » 2:01 PM 4/2/2008 |
Reply
Edit
|
V-drive in front or 'regular' style lol
http://www.internetbrands.com/ib800-692-2200
|
SFWD tC
Offline
181 posts [100%]
Syracuse NY
3-24-2003
|
| « Re: Look at this. will be out sometime this year. (rota92) | « » 2:06 PM 4/2/2008 |
Reply
Edit
|
regular
2007 Scion tC All Motor - 9.46 @ 143 MPH
2006 Scion tC SFWD - 9.96 @ 147 MPH
1999 Chop Top Honda Civic Si Pro Stock - 11.20 @119 MPH
|
MR.POWERSHIFT
Offline
43 posts [100%]
Irvine Ca
2-21-2008
|
| « Re: Look at this. will be out sometime this year. (rota92) | « » 2:06 PM 4/2/2008 |
Reply
Edit
|
thanks 
|
tony1
Offline
12310 posts [101%]
Dallas TX
5-24-2002
|
| « Re: Look at this. will be out sometime this year. (SFWD tC) | « » 2:07 PM 4/2/2008 |
Reply
Edit
|
Factory RSX front suspension?
http://www.t1raceparts.com9.19 @ 164
9.27 @ 167
|
rota92
Offline
6743 posts [100%]
On Vacation in Canadaland
6-27-2003
|
| « Re: Look at this. will be out sometime this year. (MR.POWERSHIFT) | « » 2:11 PM 4/2/2008 |
Reply
Edit
|
| Quote, originally posted by MR.POWERSHIFT » | | thanks |
? This thread has me lost lol
http://www.internetbrands.com/ib800-692-2200
|
SFWD tC
Offline
181 posts [100%]
Syracuse NY
3-24-2003
|
| « Re: Look at this. will be out sometime this year. (rota92) | « » 2:28 PM 4/2/2008 |
Reply
Edit
|
2007 Scion tC All Motor - 9.46 @ 143 MPH
2006 Scion tC SFWD - 9.96 @ 147 MPH
1999 Chop Top Honda Civic Si Pro Stock - 11.20 @119 MPH
|
tony1
Offline
12310 posts [101%]
Dallas TX
5-24-2002
|
| « Re: Look at this. will be out sometime this year. (SFWD tC) | « » 2:32 PM 4/2/2008 |
Reply
Edit
|
Looks like the motor got squished, must be a suby. lol
http://www.t1raceparts.com9.19 @ 164
9.27 @ 167
|
rota92
Offline
6743 posts [100%]
On Vacation in Canadaland
6-27-2003
|
| « Re: Look at this. will be out sometime this year. (tony1) | « » 2:34 PM 4/2/2008 |
Reply
Edit
|
Haha That thing is going to be cool! What class will it be ran in?Hope it shows up more than the ESX one
http://www.internetbrands.com/ib800-692-2200
|
DaveF
Offline
13959 posts [100%]
PA
4-30-2001
|
| « Re: Look at this. will be out sometime this year. (rota92) | « » 2:35 PM 4/2/2008 |
Reply
Edit
|
omg i gotta post in every threaD !
PSI PROformance92 civic Hatchback Hotrod chassis FORSALE
|
AR Fab
Honda-Tech Member
Offline
1197 posts [100%]
Winchester Va
10-26-2002
|
| « Re: Look at this. will be out sometime this year. (rota92) | « » 2:52 PM 4/2/2008 |
Reply
Edit
|
| Quote, originally posted by rota92 » | | Haha That thing is going to be cool! What class will it be ran in? Hope it shows up more than the ESX one |
Modified class/AWD9.5" tire class in australia.....
Sending another Make and Model to the record books in 08!FS: I have alot of hardcore B-Series Honda racing stuff...just PM! I probably still have what you need!
|
SICKM
Offline
49 posts [100%]
Australia/Us Qld/CA
5-10-2004
|
Nice to see someone using their brain and keeping with the factory geometry and independent rear end. (There is no need to go crazy, if a 3300-pound car goes 9.0 and 1.3 60ft then take 1300 pounds out and keep it the same  ) It looks like you have the factory 6 speed in there. The PPG gear set works great and this is even better: http://www.kaps.cz/zavodni.php...g=eng I hope you have no plans of running the Junk Auto’s, cost too much to run and have shit ratios. Is this going to be a steel body? That would be really cool. Good luck with it looks like a fun project that WILL work.
|
AR Fab
Honda-Tech Member
Offline
1197 posts [100%]
Winchester Va
10-26-2002
|
| Quote, originally posted by SICKM » | | Nice to see someone using their brain and keeping with the factory geometry and independent rear end. (There is no need to go crazy, if a 3300-pound car goes 9.0 and 1.3 60ft then take 1300 pounds out and keep it the same ) It looks like you have the factory 6 speed in there. The PPG gear set works great and this is even better: http://www.kaps.cz/zavodni.php...g=eng I hope you have no plans of running the Junk Auto’s, cost too much to run and have shit ratios. Is this going to be a steel body? That would be really cool. Good luck with it looks like a fun project that WILL work. |
Yes we are using all steel 08 STi body panels. We already broke the ppg gearset at 3900#. The car will come in at 2000# with driver and run the class limit 80mm turbo. We did however slightly change the factory geometry slightly.
Sending another Make and Model to the record books in 08!FS: I have alot of hardcore B-Series Honda racing stuff...just PM! I probably still have what you need!
|
rota92
Offline
6743 posts [100%]
On Vacation in Canadaland
6-27-2003
|
| « Re: Look at this. will be out sometime this year. (AR Fab) | « » 4:37 PM 4/2/2008 |
Reply
Edit
|
| Quote, originally posted by AR Fab » | Modified class/AWD9.5" tire class in australia..... |
Very cool 
http://www.internetbrands.com/ib800-692-2200
|
SICKM
Offline
49 posts [100%]
Australia/Us Qld/CA
5-10-2004
|
At 2200 pounds we had no trouble with the gears (There 6 to 5 speed set) other then a driver that could not shift
|
AR Fab
Honda-Tech Member
Offline
1197 posts [100%]
Winchester Va
10-26-2002
|
we broke 3rd gear / input shaft and the rear on a 2nd to 3rd gear shift on the street with my slicks and on the way to my wedding sept 28th.....no nitrous at the time ... 35# on a gt42I'm sure with half the weight breaking will not an issue
Sending another Make and Model to the record books in 08!FS: I have alot of hardcore B-Series Honda racing stuff...just PM! I probably still have what you need!
|
SICKM
Offline
49 posts [100%]
Australia/Us Qld/CA
5-10-2004
|
If your interested I made a new output shaft with powerglide splines and straight cut transfer gears, as well as a modified tail housing to fix that problem. After snaping one in a street car I decided to fix the problem and not to deal with it again. lol
Modified by SICKM at 10:59 PM 4/2/2008
|
1992Si
Online
2274 posts [100%]
Somers CT
8-22-2003
|
| « Re: Look at this. will be out sometime this year. (DaveF) | « » 5:54 PM 4/2/2008 |
Reply
Edit
|
| Quote, originally posted by DaveF » | | omg i gotta post in every threaD ! |
Some people have better things to do, lol post whore.
I hope we get to see videos of thing on the track.
Earl, thanks for all you did for us, "all of us". You'll live on in our memories. No one could ever replace you. RIP
AFAP Racing
1992 Yellow Civic Si best ET 9.85 @ 145.68MPH single cam, 1.54 60ft 
|
Enzo-Racing
Offline
704 posts [100%]
Deer Park NY
9-20-2002
|
| « Re: Look at this. will be out sometime this year. (1992Si) | « » 7:00 PM 4/2/2008 |
Reply
Edit
|
Looking Good.... I still think the engine is turning 2 extra wheels... Have some fun with it then now then convert it to RWD....
Enzo-Racing
http://www.enzo-racing.com
|
AR Fab
Honda-Tech Member
Offline
1197 posts [100%]
Winchester Va
10-26-2002
|
| « Re: Look at this. will be out sometime this year. (Enzo-Racing) | « » 7:38 PM 4/2/2008 |
Reply
Edit
|
| Quote, originally posted by Enzo-Racing » | | Looking Good.... I still think the engine is turning 2 extra wheels... Have some fun with it then now then convert it to RWD.... |
Yea yea yea...lol At any moment we can cut the rear half off and add in the proper tubing for a nice 9" rear...but im not interested in that any time soon.... BTW....Im anxious for you to come down and wire it for me It been a long time since we took (drag) racing this seriously so I cant wait to get back on the drag strip...We are really not concerned with sancitioning bodies as much as we are concerned about traveling around to each of the tracks on the east for their version of import racing events...but we may show up to a few Nopi/BOTI races just for the pure pleasure of staging against some fast Modified cars...win or lose...We don't care... Self Funded
No Points
No Money
No Trophies
I just want to go fast! Howard
Sending another Make and Model to the record books in 08!FS: I have alot of hardcore B-Series Honda racing stuff...just PM! I probably still have what you need!
|
d1deez
Offline
1207 posts [98%]
San Francisco CA
8-20-2001
|
| « Re: Look at this. will be out sometime this year. (SFWD tC) | « » 2:01 AM 4/6/2008 |
Reply
Edit
|
N1 Concepts - JDM Status
'04 JDM Fit: K20A ITB Widebody
www.n1concepts.com '94 Civic HB: 9.95@140mph STOCK GSR BLOCK!/F.A.S.T/SC61/25psi/BLOX
www.dimensional1.com
|
AR Fab
Honda-Tech Member
Offline
1197 posts [100%]
Winchester Va
10-26-2002
|
| « Re: Look at this. will be out sometime this year. (d1deez) | « » 6:31 PM 5/12/2008 |
Reply
Edit
|
Here is a few updated pictures. Started the header this weekend and found out I needed a few more tight radius bends then I had. Thanks for all the help from SPD on their great in-stock selection of 321 SS! We have used both Burns and SPD collectors for years, both of which are crafted very nicely but SPD prices made my wallet happier this time around. The chassis is a roller now......its been rolled from one end of the shop to the other lately...pretty much getting in the way of all the other customer projects in the shop....I have the mid plate machined but awaiting the clutch pkg. Engine is finally done! Aluminum rods were never meant to be in a Suby block! NEVER! Had to remove .250" out of the block halves and .XXX"(disclosed amount) off the rod cap....That was an awkard conversation with the rod manufacturer! I bet the boys in Puerto Rico are dealing with this right now! Since they have ordered a few sets so far.... 
Howard
Sending another Make and Model to the record books in 08!FS: I have alot of hardcore B-Series Honda racing stuff...just PM! I probably still have what you need!
|
| | First 1 2 3 > Last |
