This is pretty simple explanation/write up of how I did it. You can see the part umber I used in the first pic. 1st step is just to test fit them to see where the edge of the b-pillar door garnish is under the visor so you will know how much to cut off as this is the main problem with them fitting. The actual curve of the visor is off compared to the CRX door but it's not bad and there's plenty of adhesive to hold it in place (Test fit FIRST). The passenger side was a different length than driver side so I had to measure each individually, possibly due to having the side view mirrors mounted a little offset or something? your car may be different but I still recommend not trying to short cut by cutting them both the same amount.

All I did next was use some weather stripping I bought from home depot to cover up the small spot left after cutting out the necessary section out. This helps to keep the fit water tight, the pictures really do explain the simple process pretty well. Incase anybody's wondering how they work on the CRX after custom install? It rained STUPID hard that night and I had my windows down a few inches the entire night (6 hours of delivering pizzas) w/ no leaks what so ever, and the best part was my windows did not fog up like always since I run no AC. and of course thats the biggest reason of all that I even run these, to help keep the car dry while "defogging" the windows any time it rains really hard, otherwise or if I had AC I would probably never have messed with window visors. All in all though I do like the way it looks either way, hope this helps some of you guys out!

Here you can se the part number I used, these actually fit a 88 Civic HB perfectly, I never had a chance to test them on a 90-91 HB. I bet they fit 88 CRXs as well w/o any cutting?

My CRX build thread http://www.honda-tech.com/zerothread?id=2021995

How much and where did you buy these at?

thanks

Just so everyone knows the EF8 JDM Visors NoN power folding mirrors work with the USDM door mounted seatbelt 90-91 Crx

TW my 97 Coupe. : http://hondamarketplace.com/zerothread/2312606

Lots of crx/ef parts, si seats etc, pm me!

I bought mine at Auto zone on special order, they were only $37 after tax! Advanced or any other auto parts store should be able to order them as well.

Quote, originally posted by ESP.net »

Nice! Just so everyone knows the EF8 JDM Visors NoN power folding mirrors work with the USDM door mounted seatbelt 90-91 Crx

So the mirrors work? or the visors work? just hard to tell what your saying the way you worded it I figure your saying the JDM visors fit but either way they are stlll hella over priced making my option much cheaper and enticing.

My CRX build thread http://www.honda-tech.com/zerothread?id=2021995

cool thanks

Sorry, EF8 JDM visors work with the 90-91 (89 Dx and Si) Door Mounted Seatbelt Crx's below is the thread I did. With USDM mirrors.

http://www.honda-tech.com/zerothread?id=2195151

Ok got ya, either way the JDMs were never going on my car. $200+ can be spent on SOO many more things on my car than overpriced JDM visors. They do look good though

My CRX build thread http://www.honda-tech.com/zerothread?id=2021995

TW my 97 Coupe. : http://hondamarketplace.com/zerothread/2312606

Lots of crx/ef parts, si seats etc, pm me!

Yep, thats all! Amazing how well simplicity seems to work when needing to customize something

My CRX build thread http://www.honda-tech.com/zerothread?id=2021995

It was raining like hell while I was driving and I got to have these especially since my sunroof will not open anymore as of yesterday.

It was raining like hell while I was driving and I got to have these especially since my sunroof will not open anymore as of yesterday.

They look good on the rex don't they. people said that they did'nt make them.... phhh, took me a while to find the right #.
They do fit all 88-91, only thing I forgot to do was cut out that little piece in the top corner (good thinkin on your part)for it to sit perfect permantely. when they were new they stuck on great and after months down the road the corners peeled away a bit - cheap tape!
to who ever buys these I would recomend to use a silicon glue aswell as the two sided tape, They will peel off a bit if you dont!
These were one of the best $50 investments I have made to my car!

Well your half right. They do not fit perfect but they fit pretty close which the bast option available so far. I can't imagine installing these w/o cutting them given the gap that would be there, it would let all kinds of rain in I would think. The way they curve along the top of the door is also a little different than the CRX doors but again it's close enough to make it work since there is still enough surface area for the tape to stick to.

Quote, originally posted by 90crxdriver »

hummm went to autozone today and they said they were unavailable. started surching online and the part # on the ventshades you used is pulling up 90-91 Honda Civic 2 & 3dr. well I guess I'll order them and see how they fit. It was raining like hell while I was driving and I got to have these especially since my sunroof will not open anymore as of yesterday.

yeah you can't ask for the "CRX" ones because there is no listing, you have to just order them by their part number and thats why I took the pic of the part number up close. I only paid $37 bucks for the pair

My CRX build thread http://www.honda-tech.com/zerothread?id=2021995

Well unfortunately there is no other way to fit them securely to the door, the overlap is no big deal at all to me since the pieces are so dark they don't really stand out at all. If you cut that piece off you''ll have problems getting the visor to hold properly and my bet is the wind would have it's way with it and rip it off. If you can figure out a better way to install these then by all means have at it and I'll be all ears but I doubt there is a better way to do it than this.

My CRX build thread http://www.honda-tech.com/zerothread?id=2021995

Quote, originally posted by rexy »

I just got mine put on and it turned out pretty darn good.. thanks again for the idea,,, it works

Great to hear!, thats the exact reason I made this thread so I'm glad you guys are making use of it

My CRX build thread http://www.honda-tech.com/zerothread?id=2021995

Most likely you'll have to measure your sunroof for a universal application, I'm not sure how easy/hard it would be to get an OEM one if they are even available anymore? I bet a universal kit mounted properly would be all you need and cheaper too.

My CRX build thread http://www.honda-tech.com/zerothread?id=2021995

also is there any binding bc i knwo the CRX doors angle down a bit more than the hatchback doors??

my worry is that there is a little stress on the tape and will give over a short period of time

any problems?

Quote, originally posted by STREETWERKZ »

vtec is like mmmmmMMMMBAAAAAbaaaaabaaaaaHHHhhhhhh triple vtec.