We had huge success with the Mr Gasket High Torque B series starters we offered in the past and now are happy to be able to offer the Powermaster High Torque B Series Starters. http://www.IPGParts.com
Sales@IPGParts.com -- Email407-324-4684 -- Phone Number
Forms of Payment:
Credit Card over the Phone at 407-324-4684
Paypal at Sales@IPGParts.com
Mail us a Money Order
Wire Transfer
Order through our website here -- http://www.ipgparts.com/produc...s.htm
Please let us know if you have any questions or are interested in ordering and we will get you taken care of ASAP.
Power Master B Series High Torque Starters
$185 shipped in the continental 48 states !!!!
International shipping is available, contact us for a quote
Think your OEM starter is up to the challenge to crank your higher compression N/A motor over? Better think again. It was designed to start your stock low HP engine. Bump the compression ratio up to 11.5:1 or higher and the OE starter is heavily taxed, not to mention longevity will suffer greatly. What about that Turbo motor? Yep, chances are you’ll get heat soak, this greatly effects the performance of the OE starter. We’ve solved all of the potential problems with our Powermaster Pro (High Torque) Starter. Want 18:1 compression ratio? We can crank it. Got a 500 HP plus turbo motor, Yep we can start that too! Race cars don’t use OEM starters for a reason, doesn’t your high performance Honda deserve a high performance starter?
Benefits:
• Highest torque available
• Highest efficiency
• 4:1 Gear reduction ratio
• Cranking power for up to 18:1 compression ratio
• Each starter goes through a complete dyno test
• 200 ft-lbs. of torque
• Billet aluminum drive end
• Amp draw 80-90 amps
• Coated to eliminate corrision and hot start problems
• Eliminates heat soak problems
• Sealed O-rings and grommets
• 1.9hp Nippendenso motor
• Easily replaceable plunger and contacts
• Electric components treated with moisture and fungus resistant varnish
• Full bearing construction
Currently we have Part #'s 9700 and # 9702 available.
-- #9700 Fits B Series Engines, 92+ with Manual Transmission
-- #9702 Fits B and D Engines with Manual and Automatic Transmissions
As you can see there is a slight design difference between the part # 9702 and 9700 as pictured.
Powermaster has long been a well known manufacturer of high performance aftermarket starters, alternators and more. In fact, from the information we have they were the manufacturers of the Mr Gasket High Torque Beast starters so any of you that have purchased those from us in the past can rest assured the Powermaster starters are of the highest quality.
$185 shipped in the continental 48 states !!!!
International shipping is available, contact us for a quote
Sales@IPGParts.com -- Email407-324-4684 -- Phone Number
Forms of Payment:
Credit Card over the Phone at 407-324-4684
Paypal at Sales@IPGParts.com
Mail us a Money Order
Wire Transfer
...shortly through our website, will post the link once available
http://www.IPGParts.com
Modified by Innes at 1:10 PM 2/8/2008
Modified by Innes at 1:11 PM 2/8/2008
http://www.IPGParts.com 407-324-4684
Weld Wheels in Stock - http://www.honda-tech.com/zerothread/2054075
Stroud Safety Harnesses, Parachutes - http://www.honda-tech.com/zerothread/2185083
High Torque Starters - http://honda-tech.com/zerothread?id=2214562
9.612 @ 157.4 mph
