Padawan
Dark Mod of the Sith
Offline
11492 posts [101%]
There is no substitute.
1-1-2001
|
| « Re: side markers (Shaynepolevault) | « » 3:11 AM 1/15/2008 |
Reply
Edit
|
You connect one lead to the parking light positive wire, and the other lead to the turn signal positive wire. I wouldn't recommend setting them up this way, but they will stay lit and also blink opposite the turn signals.
|
EKstacy
Offline
792 posts [99%]
Tuscaloosa AL
11-25-2007
|
| « Re: side markers (Shaynepolevault) | « » 3:14 AM 1/15/2008 |
Reply
Edit
|
"T" off the wire and send one power wire to your blinker, and one to your parking lights and ground your ground. That should work. I thought the blinker was the parking light too, but ive been wrong before. 
i &hearts Amanda_Blair09RTC005
LNT020
|
tribexEJ1
Offline
6 posts [100%]
los angeles ca
1-23-2008
|
| « Re: side markers (EKstacy) | « » 5:16 PM 3/22/2008 |
Reply
Edit
|
I wanted to do this also but I "T" the wires so they could stay on and flash when the turn signal is on but it kept popping my fuses, so now im not sure how to do it. Any suggestions?
|
ej1love
Offline
117 posts [100%]
the wank, La.
1-16-2008
|
| « Re: side markers (tribexEJ1) | « » 12:21 PM 3/23/2008 |
Reply
Edit
|
Not to thread jack but i got a question. Can i get the wires and stuff i need at pep boys or a store like that? I just installed them but i dont have wires yet and the pwJDM ones are like 60$, i think. Also i only want mine to blink with my flashers and corners; not on all the time. How do i wire that? sorry i dont know sh!t about wiring. lol... 
|
streettactics
Offline
54 posts [100%]
SGV CA
7-11-2007
|
| « Re: side markers (ej1love) | « » 3:42 AM 3/24/2008 |
Reply
Edit
|
Wires are wires, you don't need to buy special Honda ones if you are willing to saughter (sp?) and splice. To blink with your corners, just splice the wires to the appropriate power and blinker light on your corner harness.
|
TibTeg
Offline
151 posts [100%]
TokinSmokin ca
12-20-2007
|
| « Re: side markers (streettactics) | « » 2:16 PM 3/24/2008 |
Reply
Edit
|
i have an Integra that i just put sidemarkers on a couple of days ago i set them up to the parking lights but i didnt set em up to my turn signal cuz i wasnt shure if i could do it? is it ok to set up 2 hot wires and only 1 ground or how does that work so i dont mess up my lights?? 
-F/S:96-98 EK OEM parts fenders with Side Marker Cut out, hood,headlights,etc..!!!
http://www.honda-tech.com/zerothread/2286515
|
streettactics
Offline
54 posts [100%]
SGV CA
7-11-2007
|
If you just want them to blink but not stay on all the time, you could do it by connecting the ground, and the power to the wire on the blinker that controls blinking (usually the striped wire). To have it stay on and blink when you blink, you would need to run a relay... which I don't know too much about. Good luck
|
hondacivic90zc
Offline
543 posts [100%]
somewhere so cal
2-22-2007
|
| « Re: side markers (streettactics) | « » 7:14 PM 5/4/2008 |
Reply
Edit
|
i actually just installed sidemarkers on my ef today.
To have them only blink with signals and not stay on all the time: wire them into the bumper lights
To have them stay on with the running lights and blink with the signals: wire them into the corner light signalsbear in mind i can guarantee this will work for ef's but i am not completely sure if it will work for all others too.
WTB: 90-91 Civic Si front seats
|
Seroga415
Offline
80 posts [100%]
San Francisco California
8-4-2007
|
| « Re: side markers (Shaynepolevault) | « » 10:21 PM 5/9/2008 |
Reply
Edit
|
I don't think you can do so safely at least, i've tried and failed numerous times on my prelude
|
| | |
