|
RTW DC2R
on the brink of extinction
Offline
17708 posts [100%]
HAIL OF BULLETS NY
12-19-2001
|
| « Re: Does your tranny make noise? (citrus3000psi) | « » 3:25 PM 10/10/2007 |
Reply
Edit
|
my trans has been making noise since as long as I can remember. its more of a whining noise than anything else, almost like a supercharger, and happens mainly in 4th and 5th gears. 4th gear especially Ive replaced almost all the bearings in the trans/flywheel and it has never gone away. it goes away when pushing the clutch in and is really only noticable at this point at low RPM in 4th and 5th. I just learn to not even worry about it anymore.
Box O' Crap Sale
|
citrus3000psi
Offline
1035 posts [99%]
Indianapolis IN
2-11-2003
|
Im saying parked, not reving, the car at 800 rpms. I push the clutch in. Noise goes away, let the clutch out makes noise comes back.I've experience same whin your talking about. But thats always done that.
1998 CW Acura Integra Type R # 139 
1994 Honda Accord EX
1992 Mitisubishi Eclipse GST
|
redline32
Offline
216 posts [100%]
ohio
5-4-2004
|
its your flywheel spinning,,possibly a bad pilot bearing
'97 cw itr
'02 wrx wagon work car
|
RRRRRRRR
Offline
858 posts [96%]
1-17-2007
|
| Quote, originally posted by redline32 » | | bearing |
will be dropping the tranny later this year.
There is two kind of people in this world.People that stand up on their feet and people that get on their knee. 
|
ITR184
Offline
603 posts [99%]
Bitburg
5-13-2002
|
I get the same noise. I replaced the flywheel, clutch, pilot bearing, and throw out bearing about 9k miles back. I have had the car since new, and can't remember if that is the way it has always been.
|
citrus3000psi
Offline
1035 posts [99%]
Indianapolis IN
2-11-2003
|
| Quote, originally posted by -R- » | | will be dropping the tranny later this year. |
I replaced the clutch, pressure plate, flywheel, (pilot bearing) last year. So the parts are fairly new? If something is wrong I would love to have it be the pilot bearing. How often do bearings go bad in the transmission? And if they start to go bad how long do I have?
1998 CW Acura Integra Type R # 139
1994 Honda Accord EX
1992 Mitisubishi Eclipse GST
|
redline32
Offline
216 posts [100%]
ohio
5-4-2004
|
I had a gsr make that noise no matter the bearing for 60k til I sold her no probs just a little noise
'97 cw itr
'02 wrx wagon work car
|
SilverDc2
HT Halo2 Clan
Offline
5167 posts [100%]
snap.snip.bit. CA
4-11-2002
|
my s2000 makes the same noise, its the bearing, do you remove any panels?
Vouch Thread
Flickr
Lakers! 
I buy vintage manual minolta, pentax & vivitar lens. pm if you have any.
|
MadSuRfEr
Offline
340 posts [98%]
somewhere NC
12-17-2005
|
its the input shaft bearing. i have the same noise and thats what my buddy thats an acura tech told me.
00-966 PY
|
The Kernel
Offline
619 posts [100%]
IL
3-7-2001
|
| Quote, originally posted by citrus3000psi » | | Im saying parked, not reving, the car at 800 rpms. I push the clutch in. Noise goes away, let the clutch out makes noise comes back. I've experience same whin your talking about. But thats always done that. |
I think I'm getting the same noise. Not all the time but most of the time. It started doing it around 22k miles and I'm around 34k now. Is this something that needs attention or can I let it go unless it starts to sound worse?
|
330R
Offline
2631 posts [100%]
1-26-2000
|
| Quote, originally posted by MadSuRfEr » | | its the input shaft bearing. i have the same noise and thats what my buddy thats an acura tech told me. |
I concur. There have been other threads on this topic before and they also point to the input shaft bearing. My trans has the same issue, but it's usually pretty faint still. 91004-P21-003 BEARING, ANGULAR BALL (28X72X18)
Scott
'00 PY ITR #0330
'01 CBR600F4i| Quote, originally posted by Jon D » | | There should be a flag on your parking pole that says SCAMMA |
|
vtecthiss
Offline
374 posts [96%]
SOCAL CA
10-4-2007
|
| « Re: Does your tranny make noise? (citrus3000psi) | « » 12:07 AM 10/11/2007 |
Reply
Edit
|
nah
|
powersteer
Offline
68 posts [100%]
2-16-2006
|
can anyone confirm that its the input shalf bearing? i have the same noise too. how to prevent it from coming back if i changes the bearing?
|
floatfisher
Offline
515 posts [100%]
Ontario
3-26-2006
|
i have the same noise...ill be changing my bearings whenever the clutch takes a dump
2000 PY Integra Type R
2001 Integra GS-R (stolen) <<<<<Fucken stupid theives got CAUGHT!!!>>>>>>>
1990 Integra LS (sold)
|
ITR184
Offline
603 posts [99%]
Bitburg
5-13-2002
|
| Quote, originally posted by The Kernel » | I think I'm getting the same noise. Not all the time but most of the time. It started doing it around 22k miles and I'm around 34k now. Is this something that needs attention or can I let it go unless it starts to sound worse? |
With 34k I would think you be okay for a while. If you still have the stock clutch, I would wait until you need to replace the clutch. If mine starts making noises under a load I will be a little more concerned.
|
Aquafina
ITR EXPO Sponsor
Offline
8256 posts [100%]
Johnson City TN
1-3-2003
|
With the clutch out it could be the ISB or TOB.ISB is more of a whirring knock, TOB is a whine. If its the ISB, replace ASAP or you'll be needing a new trans after it explodes.
Whoopee Doo Racing, MFactory, Rocket Motorsports, Action Clutch, CP Pistons, Supertech, ACL
ITR Expo Sponsor 2006-2008, Big Tuna Motorsports Sponsor 2008
Come see me at the MFactory booth (#10577, next to the Kenwood booth) during SEMA!
|
citrus3000psi
Offline
1035 posts [99%]
Indianapolis IN
2-11-2003
|
I'll try and take some audio of it. I think its loud enough to tell and hear online via high quality. I do that tonight after work.
1998 CW Acura Integra Type R # 139
1994 Honda Accord EX
1992 Mitisubishi Eclipse GST
|
GO-FIGHT-KILL
ZedEx
Offline
6072 posts [100%]
Wilmington NC
9-18-2005
|
I had this same noise in my transmission, before it blew (Not related to the noise).The input shaft bearing, main bearing, and differential bearings, were replaced. My mechanic who rebuilt it (Same Acura Technitian as Madsurfer refered to), told me the input shaft bearing was the cause of the noise. After it went back it, idle was quiet as could be.
NationalSpeedINC- 2000 Acura Integra Type-R - PY 00-0686
- 1997 Honda Prelude Type-SH - Daily Driver + ZED [i.e.] +
|
citrus3000psi
Offline
1035 posts [99%]
Indianapolis IN
2-11-2003
|
So It def sounds like a bearing problem. How long do I have before something bad can happen?
1998 CW Acura Integra Type R # 139
1994 Honda Accord EX
1992 Mitisubishi Eclipse GST
|
Ed 341
Offline
2870 posts [100%]
MD
2-16-2005
|
| Quote, originally posted by citrus3000psi » | | So It def sounds like a bearing problem. How long do I have before something bad can happen? |
I got to 135,000 without anything bad happening. I pushed the envelope.
FS: Nothing at this time
Something cool to go here...
'01 PY ITR 341 - Retired to the garage
'00 Integra GS sedan - DD
'05 Xterra Off Road 4x4 6spd. - sold
|
Larkin W.
Offline
2403 posts [100%]
NE
12-14-2001
|
| Quote, originally posted by 330R » | I concur. There have been other threads on this topic before and they also point to the input shaft bearing. My trans has the same issue, but it's usually pretty faint still. 91004-P21-003 BEARING, ANGULAR BALL (28X72X18) |
Yup, I just recently replaced all transmission bearings, put in a new clutch, flyweel, and rear main seal. Tranny is quite as can be. My gears looked great for having 104,000 miles on them. Didn't replace any syncros or gears because it does not grind and wear looked normal
1997 ITR #171 - 100,000 miles club 
|
Aquafina
ITR EXPO Sponsor
Offline
8256 posts [100%]
Johnson City TN
1-3-2003
|
| Quote, originally posted by citrus3000psi » | | So It def sounds like a bearing problem. How long do I have before something bad can happen? |
I toasted my ISB during the last session at Expo 5. Made it 999 miles back home and a couple hundred after that until my new clutch/fw/etc came in along with the new ISB and seal.
Whoopee Doo Racing, MFactory, Rocket Motorsports, Action Clutch, CP Pistons, Supertech, ACL
ITR Expo Sponsor 2006-2008, Big Tuna Motorsports Sponsor 2008
Come see me at the MFactory booth (#10577, next to the Kenwood booth) during SEMA!
|
Gorman
Offline
18 posts [100%]
Cork
9-18-2007
|
Are these gearbox bearings expensive??
DC2 ITR....ya ya ya...
|
Aquafina
ITR EXPO Sponsor
Offline
8256 posts [100%]
Johnson City TN
1-3-2003
|
ISB is about $25. At least for my D. Probably similar for the B.
Whoopee Doo Racing, MFactory, Rocket Motorsports, Action Clutch, CP Pistons, Supertech, ACL
ITR Expo Sponsor 2006-2008, Big Tuna Motorsports Sponsor 2008
Come see me at the MFactory booth (#10577, next to the Kenwood booth) during SEMA!
|
| | First 1 2 > Last |
