24boosted

iTrader: (1)

Prototyping....
These are just the side skirts, the front lip and rear will be revealed later. Will be very subtle and more simple looking than the HFP kit. I'm not a body kit guy but my car is the guinea pig.

Making adjustments and checking dimensions. It will have more flare with the end product, will look similar to the RSX stock kit.


Will be made out of this stuff, some weird funky super light weight material. I think they called it "carbon fiber" or something along those lines. My battery tie down waiting to cure and be cut.

06sik20z3

how about some better pics

jayturboef

nice are you making it only for yourself or are you going to sell them

xanatos

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 24boosted &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>

Those wheels look fake man ..... nah im effin with you, inside joke, i cant wait to see the final stage!

Mik3

are there any front lip drawings?

24boosted

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xanatos &raquo;</TD></TR><TR><TD CLASS="quote">Those wheels look fake man ..... nah im effin with you, inside joke, i cant wait to see the final stage! </TD></TR></TABLE>

My wheels are cheapy, low end Japanese 5Zigens, good eye!

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 06sik20z3 &raquo;</TD></TR><TR><TD CLASS="quote">how about some better pics</TD></TR></TABLE>

Be patient my friend.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jayturboef &raquo;</TD></TR><TR><TD CLASS="quote">nice are you making it only for yourself or are you going to sell them</TD></TR></TABLE>

Depends on the final product, which will go to the body shop for paint and final touches. They will be made if I can get distribution through my friend's warehouse/manufacturer.

xanatos

i was kidding hahhahaha i like them, i like them A LOT!

Kidnkorner

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 24boosted &raquo;</TD></TR><TR><TD CLASS="quote">My wheels are cheapy, low end Japanese 5Zigens, good eye! </TD></TR></TABLE>

Hey we can't help it you cheaped out and got the cast FN01R-C instead of the forged FN01-R

jayturboef

is that a scuff mark or what is above your i-vtec???

24boosted

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jayturboef &raquo;</TD></TR><TR><TD CLASS="quote">is that a scuff mark or what is above your i-vtec???</TD></TR></TABLE>

It's my FG Squad sticker.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kidnkorner &raquo;</TD></TR><TR><TD CLASS="quote">

Hey we can't help it you cheaped out and got the cast FN01R-C instead of the forged FN01-R </TD></TR></TABLE>

My Si gets the cheap parts since my 350z is too expensive to mod.

Mortgage payments on the house doesn't help either.

Declectic

iTrader: (2)

at this point, i'm curious to see what ur idea for front/rear will be

also, whats the ETA on the final product?

elohel

Haha I think you posted this a little prematurely, it just looks like you taped a black 2x4 on the bottom of your car.

For making your own **** though

24boosted

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by elohel &raquo;</TD></TR><TR><TD CLASS="quote">Haha I think you posted this a little prematurely, it just looks like you taped a black 2x4 on the bottom of your car.

For making your own **** though</TD></TR></TABLE>

LOL I agree, it does, doesn't it? I'll have better pics up in 2 weeks. You should see how some kits begin, they start with almost anything, card board, foam, tape, glue, resin, fiberglass etc. It usually looks like *** at the beginning.

elohel

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 24boosted &raquo;</TD></TR><TR><TD CLASS="quote">

LOL I agree, it does, doesn't it? I'll have better pics up in 2 weeks. You should see how some kits begin, they start with almost anything, card board, foam, tape, glue, resin, fiberglass etc. It usually looks like *** at the beginning. </TD></TR></TABLE>

Hah no worries, I got faith you in man. Any chances of a 4 dr version?

IGotNoSwap

skirts look sick.

japspecjohn

so those are stock rsx skirts modded?

24boosted

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by elohel &raquo;</TD></TR><TR><TD CLASS="quote">

Hah no worries, I got faith you in man. Any chances of a 4 dr version? </TD></TR></TABLE>

Here's some previous stuff I've made. EG CF moldings. Made it several years ago as you can tell from the old school monitor. lol



Knocking off some side skirts back in 1999.


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by japspecjohn &raquo;</TD></TR><TR><TD CLASS="quote">so those are stock rsx skirts modded?</TD></TR></TABLE>
No, made from foam, paper, fiberglass and carbon.

97Ej6

Looks good.

faster Type R

interested to see the final product...i love the hfp kit though

EJ8VTECFTW

looks good id be interested in a jdm style lip especially on the front, not too big of a fan of the hfp lip kits but seeing a simple jdm style lip kit would look nice, especially c/f

24boosted

iTrader: (1)

The plans.

xanatos

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 24boosted &raquo;</TD></TR><TR><TD CLASS="quote">
The plans.

</TD></TR></TABLE>

AWWW MAN, that actually looks good!

EJ8VTECFTW

oh **** i want that asap dude

97Ej6

that looks good. REAL GOOD

Mik3

That looks pretty good...simple yet different. The flare makes a huge difference. When i saw the first picture, i was like meh it looks kind of plain.

What does the front look like?