Do you remember my EM1??? Well if don't check it out. The Madness is back!
12-26-2006, 08:17 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2004
Location: Birmingham, AL
Posts: 3,527
Likes: 0
Received 0 Likes
on
0 Posts
Do you remember my EM1??? Well if don't check it out. The Madness is back!
<FONT SIZE="6">Updates on pg's 2, 3, 4, 12, 14, 17, 20, 21, 30 and 32</FONT>
So back a few months ago, I joked around about selling the car, well the joke was taken serious, so I played along, in the mean time I set out to build a sick *** street car, that could hold it's on at the track...
So yeah, I decided to finish my build...
Here's the Rundown on the parts list.
Exterior
Spoon Ek plastic Mirrors
ARC Majic Winglets
Air Walker Front Bumper,
Interior
Vision CarbonKevlar Corsa Drivers Seat
Bride Exas III Passenger Seat
Crow 5pt Harnesses
Momo Mod 08 Steering wheel
Fastline Performance Road Race Shifter
Spoon ****
Kirk 6pt Cage with Halo and door bars notice door bars haven't been welded in yet, I still have to make another apt. with Kirk and have that done.
Suspension
98 Spec ITR 5lug w/ 36mm axles
Omni Power Sports 10k/12k
Omni Front/Rear Camber Kits
Brembo Blanks
Hawk Pads
Earls Stainless Lines Front/Rear
Skunk2 extended Studs
Skunk2 extended Lugs
OEM 26mm Front Sway
ASR 32 mm Rear Sway w/ Subframe Plate
F7 Rear Lca's
15x7 5zigen Fnor1c's in chevy Orange w/ Azenis 615's
16x7 JDM ITR wheels in Champ White w/ Azenis 615's
Motor
Stock B16 which is being use for destruction basically. The motor has 167k miles, so I'm just hoping it was last Untill I can get a block back from Benson. The Benson block will be built to withstand the boost, and hopefully provide me with some reliability
Engine mods include
PeakBoost Topmount Manifold w/ 44mm vband port
Garrett GT30R 67 trim Turbo
Tial 44mm WG
Tial BOV
Garrett Intercooler good for up to 600hp
PeakBoost Piping
PeakBoost 3" Downpipe
RC 1000cc Injectors
Walboro 255lph fuel pump
My manifold is on 6wk backorder, and I still have about 3wks left of that, so that gives me time to get my head straight on what block to send to Benson, and figure out all my electronics as far as Engine Management and so forth.
Along with all that talk Here's a few pictures to start things off. Pics will be updated as things arrive. So please check back often.
Sneak Peaks ....
Modified by Jeremy D. Swain RT (R) at 3:02 AM 12/29/2007
So back a few months ago, I joked around about selling the car, well the joke was taken serious, so I played along, in the mean time I set out to build a sick *** street car, that could hold it's on at the track...
So yeah, I decided to finish my build...
Here's the Rundown on the parts list.
Exterior
Spoon Ek plastic Mirrors
ARC Majic Winglets
Air Walker Front Bumper,
Interior
Vision CarbonKevlar Corsa Drivers Seat
Bride Exas III Passenger Seat
Crow 5pt Harnesses
Momo Mod 08 Steering wheel
Fastline Performance Road Race Shifter
Spoon ****
Kirk 6pt Cage with Halo and door bars notice door bars haven't been welded in yet, I still have to make another apt. with Kirk and have that done.
Suspension
98 Spec ITR 5lug w/ 36mm axles
Omni Power Sports 10k/12k
Omni Front/Rear Camber Kits
Brembo Blanks
Hawk Pads
Earls Stainless Lines Front/Rear
Skunk2 extended Studs
Skunk2 extended Lugs
OEM 26mm Front Sway
ASR 32 mm Rear Sway w/ Subframe Plate
F7 Rear Lca's
15x7 5zigen Fnor1c's in chevy Orange w/ Azenis 615's
16x7 JDM ITR wheels in Champ White w/ Azenis 615's
Motor
Stock B16 which is being use for destruction basically. The motor has 167k miles, so I'm just hoping it was last Untill I can get a block back from Benson. The Benson block will be built to withstand the boost, and hopefully provide me with some reliability
Engine mods include
PeakBoost Topmount Manifold w/ 44mm vband port
Garrett GT30R 67 trim Turbo
Tial 44mm WG
Tial BOV
Garrett Intercooler good for up to 600hp
PeakBoost Piping
PeakBoost 3" Downpipe
RC 1000cc Injectors
Walboro 255lph fuel pump
My manifold is on 6wk backorder, and I still have about 3wks left of that, so that gives me time to get my head straight on what block to send to Benson, and figure out all my electronics as far as Engine Management and so forth.
Along with all that talk Here's a few pictures to start things off. Pics will be updated as things arrive. So please check back often.
Sneak Peaks ....
Modified by Jeremy D. Swain RT (R) at 3:02 AM 12/29/2007
Trending Topics
12-26-2006, 08:29 PM
#8
memoryFAB.com representative
Join Date: Jul 2002
Location: MEMORYFAB.COM
Posts: 7,811
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do you remember my EM1??? Well if don't check it out. The Madness is back! (Jeremy D. Swain)
awww my company is in yr signature. or the one i work for! yea I've helped you out and I see my future radiator. 
12-26-2006, 08:36 PM
#9
Honda-Tech Member
Join Date: May 2004
Location: BEHIND MY CANON, TX
Posts: 1,040
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do you remember my EM1??? Well if don't check it out. The Madness is back! (Jeremy D. Swain)
very nice. Does it feel strange shifting in that high position at first?
12-26-2006, 08:47 PM
#12
Honda-Tech Member
Join Date: Jun 2005
Location: NY/LI
Posts: 2,040
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do you remember my EM1??? Well if don't check it out. The Madness is back! (B18CivicEg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18CivicEg »</TD></TR><TR><TD CLASS="quote">nice car! </TD></TR></TABLE>
</TD></TR></TABLE>
12-26-2006, 11:23 PM
#18
Honda-Tech Member
Thread Starter
Join Date: Jun 2004
Location: Birmingham, AL
Posts: 3,527
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do you remember my EM1??? Well if don't check it out. The Madness is back! (ITRwannabe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITRwannabe »</TD></TR><TR><TD CLASS="quote">very nice. Does it feel strange shifting in that high position at first?</TD></TR></TABLE>
At first it was kinda strange, but after a few miles, I was in love.
At first it was kinda strange, but after a few miles, I was in love.
12-26-2006, 11:26 PM
#19
Honda-Tech Member
Join Date: Feb 2002
Location: just when you thought you were different, WA, NWforLIFE
Posts: 14,489
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do you remember my EM1??? Well if don't check it out. The Madness is back! (Jeremy D. Swain)
thats going to be murder when its done!! good luck with the build
12-26-2006, 11:54 PM
#21
Member
Join Date: Jun 2002
Location: US
Posts: 4,448
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do you remember my EM1??? Well if don't check it out. The Madness is back! (Jeremy D. Swain)
sounds like another sick car is gonna be hitting the streets soon..not too much knowledge/experience with the stack clusters but ive definitely seen some other companies step it up with their own versions..but i cant remember them off the top of my head 
12-26-2006, 11:57 PM
#22
Honda-Tech Member
Thread Starter
Join Date: Jun 2004
Location: Birmingham, AL
Posts: 3,527
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do you remember my EM1??? Well if don't check it out. The Madness is back! (Deluzional)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Deluzional »</TD></TR><TR><TD CLASS="quote">sounds like another sick car is gonna be hitting the streets soon..not too much knowledge/experience with the stack clusters but ive definitely seen some other companies step it up with their own versions..but i cant remember them off the top of my head </TD></TR></TABLE>
haha, please explain.
</TD></TR></TABLE>haha, please explain.
12-27-2006, 12:07 AM
#23
Honda-Tech Member
iTrader: (1)
Join Date: Apr 2004
Location: in a del sol, all over the five o four, LA
Posts: 5,784
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do you remember my EM1??? Well if don't check it out. The Madness is back! (Jeremy D. Swain)
i love this car. a lot of nice,original stuff. I cant stand those 5 zigens though..on anything 
the work rsz-rs were sex.
however,im sure the 16' itr wheels are $ as well,any pics of those mounted?
the work rsz-rs were sex.
however,im sure the 16' itr wheels are $ as well,any pics of those mounted?
12-27-2006, 12:14 AM
#25
Honda-Tech Member
Thread Starter
Join Date: Jun 2004
Location: Birmingham, AL
Posts: 3,527
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do you remember my EM1??? Well if don't check it out. The Madness is back! (SOLtrain)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOLtrain »</TD></TR><TR><TD CLASS="quote">i love this car. a lot of nice,original stuff. I cant stand those 5 zigens though..on anything
the work rsz-rs were sex.
however,im sure the 16' itr wheels are $ as well,any pics of those mounted? </TD></TR></TABLE>
Man, I've always loved Fnor1c's for some reason, just a simple 5spoke design I guess.
I haven't gotten to mount the ITR's yet, I'm still waiting UPS to bring my tires. Hopefully by the weekend I'll get to see what they look like.
and then I'll be able to put some slicks on the 5zigens.
Thanks for all the kind words, I really appreciate it.
the work rsz-rs were sex.
however,im sure the 16' itr wheels are $ as well,any pics of those mounted?
</TD></TR></TABLE>Man, I've always loved Fnor1c's for some reason, just a simple 5spoke design I guess.
I haven't gotten to mount the ITR's yet, I'm still waiting UPS to bring my tires. Hopefully by the weekend I'll get to see what they look like.
and then I'll be able to put some slicks on the 5zigens.
Thanks for all the kind words, I really appreciate it.