|
Synapz
Offline
209 posts [100%]
Vancouver BC
3-29-2006
|
K20A2 is from a USDM RSX-S, not Civic Si 
EvoGarage
http://www.evogarage.com
|
Vantage
Offline
2253 posts [100%]
Abbotsford B.C.
10-23-2003
|
K20a ( JDM RSX Type R)Engine Specs HP 220 @ 8000RPM
Torque 152 lb/ft @ 7000 RPM
Bore 86mm
Stroke 86mm
Comp Ratio 11.5:1
Displacement 1998cc
Specific output 110HP/L
K20a2 ( RSX-S)
Engine Specs HP 200 @ 7400RPM
Torque 142 lb/ft @ 6000 RPM
Bore 86mm
Stroke 86mm
Comp Ratio 11:1
Displacement 1998cc
Specific output 100HP/L K20a3 ( RSX Base / Civic Si (SiR Canada) Engine Specs HP 160 @ 6500RPM
Torque 152 lb/ft @ 5000 RPM
Bore 86mm
Stroke 86mm
Comp Ratio 9.8:1
Displacement 1998cc
Specific output 80HP/L K24a1 ( CRV) Engine Specs HP 160 @ 6500RPM
Torque 162 lb/ft @ 3600 RPM
Comp Ratio 9.6:1
Displacement 2354cc
Specific output 67.5HP/L K24a3 (Accord) Engine Specs HP 160 @ 6500RPM
Torque 152 lb/ft @ 5000 RPM
Comp Ratio 9.5:1
Displacement 2354cc
Specific output 80HP/L k24a4 ( Element) Engine Specs HP 160 @ 5500RPM
Torque 161 lb/ft @ 4500 RPM
Comp Ratio 9.7:1
Displacement 2354cc
Specific output 67.5HP/L K24a2 ( TSX) Engine Specs HP 200 @ 6800RPM
Torque 166 lb/ft @ 4500 RPM
Comp Ratio 10.5:1
Displacement 2354cc
Specific output 83.3HP/L K20z3 Civic Si (8thgen) Engine Specs HP 197 @ 7800RPM
Torque 139 lb/ft @ 6100 RPM
Bore 86mm
Stroke 86mm
Comp Ratio 11:1
Displacement 1998cc
Specific output 100HP/L
K20z1 04,05 RSX-S
Engine Specs HP 210 @ 7800RPM
Torque 143 lb/ft @ 7000 RPM
Bore 86mm
Stroke 86mm
Comp Ratio 11:1
Displacement 1998cc
Specific output 105HP/L
Out with the Old... 2001 Civic LX
In with the new... 2002 Tacoma TRD 4x4
|
civic_minded1987
Offline
24 posts [100%]
Vicksburg MS
7-10-2006
|
hey nice postage of the specs on the engines but one thing i noticed is that you have the k20a rated at 152tq@7000rpm but according to http://www.tunerworld.com it is really 206tq@7000rpm im not trying hate on your work just want to make sure the info is correct  also does anyone know about how much a k20a will crank out after adding intake, intake manifold, headers and exhaust (all performance grade of course) just wondering cuz i am planning on swappin that old hunk d17 out of my em2 if this has been asked before (which i doubt) i apologize.... if no one knows just pointing me in the right direction would be great thanks
Modified by civic_minded1987 at 1:04 AM 9/25/2006
Modified by civic_minded1987 at 1:04 AM 9/25/2006
|
Curiouz_G
Offline
2797 posts [99%]
Fairfax VA
10-23-2005
|
youll never see a honda motor make more tq than HP at the wheels
The pleasure of a dream is that it is a fantasy. If it happens then it was never a dream to begin with.
| Quote, originally posted by yobbr5 » | | My buddy has a superchargered s2k, and that its rear wheel drive and it loses about 40% of its power from the drivetrain, axle, and other things. |
|
The Lobster
Offline
3523 posts [100%]
Morgantown WV
9-20-2004
|
| Quote, originally posted by Curiouz_G » | | youll never see a honda motor make more tq than HP at the wheels |
if by never you mean there are couple cars on here with turbos making more torque then horsepower then yes you are correct
DAP  http://www.wvstreets.com
http://www.wvmotorsports.com FS:d16 acl rod bearings - EK RHD ashtray - DX cluster -
|
Argale
Offline
42 posts [100%]
Miami FL
9-13-2006
|
one quick question. I have the d17a2, and im planning to swap it for a k20. Unfortunately my car is automatic and i want to do change it to manual. Is that a lot of work and money?
4 door proud owner http://www.cardomain.com/ride/2482829/1
|
toyomatt84
Sanji
Online
12134 posts [101%]
ALL BLUE
4-2-2005
|
| Quote, originally posted by Argale » | | one quick question. I have the d17a2, and im planning to swap it for a k20. Unfortunately my car is automatic and i want to do change it to manual. Is that a lot of work and money? |
Ballpark, around 1000 dollars.
*free hugs*
|
Curiouz_G
Offline
2797 posts [99%]
Fairfax VA
10-23-2005
|
| Quote, originally posted by The Lobster » |
if by never you mean there are couple cars on here with turbos making more torque then horsepower then yes you are correct |
since this was a thread about just engine swaps, i was talking about a stock motor.
The pleasure of a dream is that it is a fantasy. If it happens then it was never a dream to begin with.
| Quote, originally posted by yobbr5 » | | My buddy has a superchargered s2k, and that its rear wheel drive and it loses about 40% of its power from the drivetrain, axle, and other things. |
|
The Lobster
Offline
3523 posts [100%]
Morgantown WV
9-20-2004
|
the old legends had more tq then hp:)
DAP http://www.wvstreets.com
http://www.wvmotorsports.com FS:d16 acl rod bearings - EK RHD ashtray - DX cluster -
|
civic_minded1987
Offline
24 posts [100%]
Vicksburg MS
7-10-2006
|
206 is not greater than 220 last time i checked but hey i could be wrong i dunno.... but does anyone have an answer to the second part of my post about total hp after mods in the k20a cuz that was what i really wanted to know
|
The Lobster
Offline
3523 posts [100%]
Morgantown WV
9-20-2004
|
droppedcrx K20a with intake and HDR/EIt made 221.8whp and 159.1tq this is at the wheel not crank so add on estimate 20% somewhere around 245-250 hp http://www.honda-tech.com/zero...ge=37
DAP http://www.wvstreets.com
http://www.wvmotorsports.com FS:d16 acl rod bearings - EK RHD ashtray - DX cluster -
|
civic_minded1987
Offline
24 posts [100%]
Vicksburg MS
7-10-2006
|
so i imagine it would be pretty difficult to sqeeze 300 or close to it out without boost  did you replace underdrive pulley, cams, or camshaft
|
fventura03
Offline
10206 posts [100%]
Usulutan, El Salvador
12-22-2003
|
| Quote, originally posted by civic_minded1987 » | | so i imagine it would be pretty difficult to sqeeze 300 or close to it out without boost did you replace underdrive pulley, cams, or camshaft |
wouldn't be too hard just a crapload more money, but easier with boost.
-Freddy
myspace.com/fventura03 (add me if you know me)
|
The Lobster
Offline
3523 posts [100%]
Morgantown WV
9-20-2004
|
you could reach 300 or very close.your forgetting he only has 2 real mods and mostly bolt ons. buy cams/ header, more tuning, maybe even bump up compression some more and im sur eyou can reach 300. your forgetting he probably runs 12s if not faster with just 220 NA hp 160tq.
DAP http://www.wvstreets.com
http://www.wvmotorsports.com FS:d16 acl rod bearings - EK RHD ashtray - DX cluster -
|
fventura03
Offline
10206 posts [100%]
Usulutan, El Salvador
12-22-2003
|
i highly doubt 220whp in an em2 will give you 12s, maybe high 13s, if that. some guy had ~500whp in his em2 (k20 turbo) and only hit 11s. em2 is heavy.inlinepro's na ~300whp k24 frank eg hatch does 10s btw.
-Freddy
myspace.com/fventura03 (add me if you know me)
|
92egSnatch
Offline
432 posts [100%]
Boston Texas
3-28-2007
|
| « Re: FAQ: What engine should I put in my EM2/ES1? (Miracle) | « » 10:22 PM 3/29/2007 |
Reply
Edit
|
couple of questions does anyone know any good sites to buy a jdm k20a and also any good shops to do the swap in the Ausitn/Courpus Christie TX Area and prices on the swap?
Thanks for your help
WTB 01-05 CIVIC LX OE mid pipe/resonator
PM me
| Quote, originally posted by Probot » |
AMEN - however, i say expletive chicks too..literally. Never turn down moose knuckle.
|
|
Shintakun
Offline
178 posts [100%]
Austin TX
5-29-2006
|
| « Re: FAQ: What engine should I put in my EM2/ES1? (01D17a1) | « » 10:45 PM 3/29/2007 |
Reply
Edit
|
| Quote, originally posted by 01D17a1 » | couple of questions does anyone know any good sites to buy a jdm k20a and also any good shops to do the swap in the Ausitn/Courpus Christie TX Area and prices on the swap?
Thanks for your help |
http://www.passwordjdm.com/pro...D=134 theres your engine. hit up Protech performance in Austin TX. off of Lamar in a street i forgot.
|
7thgencivicsdn
Offline
85 posts [100%]
Tallahassee FL
3-27-2007
|
| Quote, originally posted by Vantage » | K24a3 (Accord) Engine Specs HP 160 @ 6500RPM
Torque 152 lb/ft @ 5000 RPM
Comp Ratio 9.5:1
Displacement 2354cc
Specific output 80HP/L
|
Are these the engine specs for an 2006 accord V6, if not what are engine specs? Also can you use the block from an the V6 accord?
|
toyomatt84
Sanji
Online
12134 posts [101%]
ALL BLUE
4-2-2005
|
| Quote, originally posted by 7thgencivicsdn » |
Are these the engine specs for an 2006 accord V6, if not what are engine specs? Also can you use the block from an the V6 accord? |
There are no kits out there, to mount a V6 (of any kind) in the 7th gen. Civic. So, you're not going to be able to use it. | Quote, originally posted by wikipedia » | | K24A3 * Found in:
o 2003-2006 Honda Accord (Europe, Japan, and Australia)
+ Displacement: 2354 cc
+ Bore and Stroke: 87 mm x 99 mm (3.43x3.90 inches)
+ Compression: 10.5:1
+ Power: 189 hp (140 kW) @ 6800 rpm
+ Torque: 164.5 ft·lbf (223 N·m) @ 4500 rpm
+ Redline: 7000 rpm
|
*free hugs*
|
JamesL
Offline
983 posts [100%]
3-10-2003
|
| Quote, originally posted by fventura03 » | i highly doubt 220whp in an em2 will give you 12s, maybe high 13s, if that. some guy had ~500whp in his em2 (k20 turbo) and only hit 11s. em2 is heavy.
inlinepro's na ~300whp k24 frank eg hatch does 10s btw. |
I'd really take the driver into account when considering these times. The EM2s are a bit porky compared to earlier model Hondas, but weight less than both the RSXs and EP3s... Comparing them to eg hatches with that much torque is hardly fair 
|
OG SHG_EM1
Offline
3660 posts [98%]
Dutchess County NY
7-24-2003
|
| Quote, originally posted by Curiouz_G » | | youll never see a honda motor make more tq than HP at the wheels |
ummm legend type II motor...200HP 205/Tq...learn the facts before u start talkin shit
07' GGM Civic Si 4DR EK-EG2-EM1-EM1-FA5 Official SoHonda Garage. Member #04
|
Curiouz_G
Offline
2797 posts [99%]
Fairfax VA
10-23-2005
|
humm, 5tq. amazing.  oh im sorry SHG_EM1. you must know EVERYTHING about honda motors. big deal. just because i left out ONE motor means i spout useless shit? gtfo and take your little e-penis with you
The pleasure of a dream is that it is a fantasy. If it happens then it was never a dream to begin with.
| Quote, originally posted by yobbr5 » | | My buddy has a superchargered s2k, and that its rear wheel drive and it loses about 40% of its power from the drivetrain, axle, and other things. |
|
sujak
B A N N E D
Offline
389 posts [95%]
Illinois
9-3-2006
|
You can also use the k20z1 out of the 05-06 rsx-s but to use k-pro you require the 02-04 PRB ECU sent ot hondata for the kpro and adapter harness, and you'll have problems with the cluster getting the speed.
Current: 2005 Honda Civic EX
COMING SOON!!!! In August 07' ------ 2006 WRX STi7thgenhonda.com only forum for 7th gen civics ONLY!!!
|
92egSnatch
Offline
432 posts [100%]
Boston Texas
3-28-2007
|
| « Re: FAQ: What engine should I put in my EM2/ES1? (Miracle) | « » 11:44 PM 4/11/2007 |
Reply
Edit
|
any1 no anything about osakajdmmotors.com
WTB 01-05 CIVIC LX OE mid pipe/resonator
PM me
| Quote, originally posted by Probot » |
AMEN - however, i say expletive chicks too..literally. Never turn down moose knuckle.
|
|
| | First 1 2 3 4 > Last |
.jpeg)