Print  Email  Subscribe  RSS  Help
 Need help with eld sensor(pic)
Author Post

capzuk




Offline

81 posts [100%]
birmingham little britain
4-26-2006
  Need help with eld sensor(pic)« » 2:39 PM 5/10/2006 Reply  Edit

Hello,right my car ticks over at about 1500rpm and then drops after a few seconds to 1200rpm,diagnostic puts a fault up saying ELD and basicly somone has removed mine and i can't find any wiring for the sensor to be pluged into under the fuse box,why would this be done?

^^^This is what im left with^^^


Also on my list of problems ,there should be a pipe going from the tube above the sensor but there isn't,What's it for?


Sorry pics may be a bit large


UK ALL DAY


cjames235




Offline

1621 posts [100%]
M Town TN
10-11-2001
 « Re: Need help with eld sensor(pic) (capzuk)« » 9:05 PM 5/10/2006 Reply  Edit

wow those pics are huge!! as far as the eld goes there is no wires that come out of the box for it........ its got 2 tabs on it and it snaps into that square and then the end screws for the 2 fuses next to it is what the eld goes to

the nipple on the throttle body is for emissions i believe......... cant remember what it was for as the USDM cars dont have that one

sorry if that first bit is confusing


ITR 98-0570

capzuk




Offline

81 posts [100%]
birmingham little britain
4-26-2006
 « Re: Need help with eld sensor(pic) (neo_)« » 5:49 AM 5/11/2006 Reply  Edit

So are you saying i have a jdm throttle body?

And i dont know what to do about this ELD there's no point getting one if i have nothing to plug it into

Yes it is rhd(uk)

Modified by capzuk at 3:33 AM 5/11/2006


UK ALL DAY

capzuk




Offline

81 posts [100%]
birmingham little britain
4-26-2006
 « Re: Need help with eld sensor(pic) (capzuk)« » 2:40 PM 5/11/2006 Reply  Edit

Anybody know why the eld would be removed??????????

And what does that pipe on th t/b do??


UK ALL DAY

capzuk




Offline

81 posts [100%]
birmingham little britain
4-26-2006
 « Re: Need help with eld sensor(pic) (neo_)« » 2:46 PM 5/11/2006 Reply  Edit

Ok , so whats the difference between the two?


UK ALL DAY

cjames235




Offline

1621 posts [100%]
M Town TN
10-11-2001
 « Re: Need help with eld sensor(pic) (capzuk)« » 9:25 PM 5/11/2006 Reply  Edit

i already told you about the eld........ there is no plug for it....... it only screws into the 2 fuse end screws and snaps into that boxed area that is empty on your car


ITR 98-0570

sdots




Offline

2 posts [100%]
3-4-2008
 « Re: Need help with eld sensor(pic) (capzuk)« » 11:45 AM 5/8/2008 Reply  Edit

facing the same problem with the ELD CEL.

The nipple is connected via a vacuum hose, connecting from the nipple in your picture to the carbon canister located on your firewall.

hope this helps


crx(gator)




Offline

2576 posts [99%]
back home in ny
7-5-2001
 « Re: Need help with eld sensor(pic) (sdots)« » 12:02 PM 5/8/2008 Reply  Edit

the ELD has nothing to do with vacuum...

ELD = electronic load detector

there is nothing electronic going on with the vacuum line...usually ELD is for the alternator and it's output voltage...


EM1

crx > *

strawberry shortcake

R.Kelley
No, really that's my name!



Online

1145 posts [100%]
REDSOX NATION
7-25-2003
 « « » 12:11 PM 5/8/2008 Reply  Edit

that nipple on the Tbody i believe goes to the canister


00 Penix Jello #165
98 UnDX Hatch Daily Beater
MYSPACE
PAY FOR Z EXPO
PS3- TYPE-RKelley

ithrowpoop




Offline

1445 posts [100%]
N.Y.
8-12-2001
 « Re: (R.Kelley)« » 6:30 PM 5/8/2008 Reply  Edit

if you have a bad eld, you need a new fuse box. it is a part of it and it plug in on the under side of the fuse box.


R-SPEED

00-ITR #1515
90-RT4WD CIVIC WAGON sold
87-crx si current dd
   

» Return to Acura Integra Type-R
Forum Jump
Quick Reply

Powered by ZeroForum 2.1.2b. ©2008 RelyNet, Inc.