YOU MUST START YOUR POST WITH FS: OR WTB:

What you can include in here:
Engines and all components
Trannies and associated drivetrain parts
Electrical items/ECUs
"All Motor" sized Slicks

What you can not include:
Suspension
Brakes
Wheels
Interior pieces such as seats etc
DO NOT reply to or quote posts, PM for questions.

Any violations of these basic rules, and the post will be deleted. and you MAY be docked user points/and or banned

http://www.hondamarketplace.com/zerothread/1845437

Make offer$$$

I also have a zeitronix wideband with lcd display with all the sensors, egt,boost,wideband and seriel cable. This is the best wideband out there!

Make offer$$$

Been used for 3 track pulls with 92 octane gas

open diff about 90k with no grinds

$550 obo

Modified by M!nes at 10:52 PM 8/5/2007

a gsr head worked on by portflow with
supertech valve springs and retainers
supertech flat faced valves
buddy club spec 5 cams
bdl camgears in silver

head has less than 2 miles just used for 2 hours on the dyno
their is nothing wrong with the head its in perfect condition
MAKE AN OFFER AND PLEASE DONT LOW BALL ME

performer x manifold portmached to a gsr head by portflow
comes with 70mm tb was used witht he gsr head less than 2 miles on it
500 firm

PM ME IF INTERESTED WILL SHIP AT BUYERS EXPENSE

I am asking $7k plus shipping OBO.

Or I will trade for a bike. I would like a Honda preferably. I would consider a sport bike or a cruiser.

The motor is located in WI.

Shawn 608-576-1015
shawn@redheadracing.net

RC 310 injectors and Clips - less then 1k miles - $230

B18c Crank - 44k miles $90 obo

GSR Cams and gears - Off a 2000 b18c1, 88k miles - $75 obo

All Parts are in Orange County CA....

Trades are welcome,

All Parts are in Orange County CA....

Trades are welcome,

Vouches:
JdmB16Eg6-GapxGuy-ww evo ix-MikeEM1-Fezzie-Laserjock-Master23-gabebauman-ColMustard-summit-joshcuhz-Rusty Shackleferd-bumsta217-joon joon-grg3135-snowboardgeek1

2) Crower Rods - Used. For LS/B20. Inspected. All within factory limits. They are the 4340 Steel Billet Rods as seen here . I want $300obo

3) Moroso Oil Pan and Oil Pickup - Used. For all B series. This is the Aluminum one as seem here. 300obo

4) Skunk 2 Pro Series Cams - Used. Skunk 2 Pro Series 1+ Cams. These are a set from my old race motor. They were used for a season of racing and still are awesome cams. I upgraded to bigger cams. They Fit all B series VTEC motors. $500

5) Skunk 2 Cams - Used. Skunk 2 Stage 3 Cams. These are a set that I picked up to test on my race motor. I havent tested yet, but i've seen other's graphs and what they can do. I dont need to use these. They Fit all B series VTEC motors. $500

6) Skunk 2 Cam Gears - Used. Not Pro Series. These are the Annodized Blue Cam gears. They fit All B series and H23 motors. $140.

7) Ported ITR Head - Used. I'm selling my spare Race head. This head is from the owner of Velocity Trends down in Florida. It is hand ported and came off a motor that made 255whp. It comes with Skunk 2 Valves, Ferrea Valve Springs, and all internals and cam caps. $1200

8) Oil Pan - Used. Fits ITR and GSR Motors. Great condition. no dents. $75

9) ACL Race Rod Bearings - BRAND NEW. Part # 4B1946H-STD. These are brand new in the box. These are the uncoated version which help to get more accurate clearances.They are my spare set. Fits B16a, B18a/b and B20. $70obo

10) ACT Clutch - Used. Fits 90-91 B Series. Unsprung 6 puck clutch with Stock pressure Plate. $75

11)ACL Rod Bearings - BRAND NEW. Part # 4B1936-STD. These are brand new in the box. I did not need them for the customer and have had them since. Fits H22 (small main) $40obo

12) ACL Rod Bearings - BRAND NEW. Part # 4B1925-STD. These are brand new in the box. I did not need them for the customer and have had them since. Fits B16a, B18a/b and B20. $40obo

13) ACL Main Bearings - BRAND NEW. Part # 5M1937-STD. These are brand new in the box. I did not need them for the customer and have had them since. Fits H22 (small main) $50obo

14) ITR Pistons. - Used. I Have 2 standard bore JDM ITR Pistons (p73-00). They are in good condition. $20 per piston

15) B16 Piston - Used. I have a standard bore B16 Piston (p30). It is in good condition. $20

16) GSR Rods/Pistons - Used. I have a set of GSR Rods/Pistons. Rods are in awesome shape and so are 3 of the pistons. One piston is shot and needs to be replaced. USDM (P72-A0). $50

17) ITR Piston on GSR Rod - Used. I have a standard bore USDM ITR Piston (p73-a0) on a GSR Rod (p72). It is in good condition. $40

18) JDM ITR Rods/Pistons - Used. I have a set of JDM ITR Rods/Pistons. Rods are in good shape and so are the pistons. JDM (P73-00). I have 2 sets of these. $100per set. 1 SET SOLD

19) JDM ITR Rods - Used. I have 2 JDM ITR Rods/Pistons. The Pistons are broken, but the rods/bolts are still great. $20each

2008 300whp NA Build

http://www.Myspace.com/RPRacing
http://www.RPRacingOnline.com

FOR SALE- Azect Eyelids for DC2 JDM Front End. Carbon or FRP
FOR SALE - Vinyl Car/Class Numbers and graphics.

Please PM me with what you got and a price or post here. I have some things to trade if ynecessary.

FOR SALE
NEW Endyn Wiseco Rollerwave pistons $315 shipped
The pistons are brand new with box with rings, pins and locks. I picked them up in another purchase. I believe the CR is with a B20 block and either B16 or B18C1 head. 84.5mm 12.8~13.1:1 CR

82mm USDM ITR pistons and pins, no rings. Brand new, installed but never used. $100 shipped

Eagle rods. All are in fine condition. Some surface rust because they are not bathing in oil.
Either set of Eagle rods, GSR or LS, $215 shipped.

NEW B18C headgasket $40.00 shipped

NEW B18B headgasket $40.00 shipped

NEW B18C timing belt $30.00 shipped



Modified by Smoothy at 3:23 PM 8/3/2007

For Sale
http://hondamarketplace.com/zerothread?id=2093219

Cams in great shape.

selling dirt cheap to clean my storage out

You got Hondata, I'll even throw in a base map to help get you to the dyno!!!!!!

PM for price and you won't be disappointed

OBD2 B18B1 Dizzy - (missing plugs) $30
OBD1 B18B1 Dizzy - $40
OBD2 B18B1 Intake Manifold - $40
MSD RPM switch - $20
1999 GSR gearsets;shifter mechanism; reverse gear and selectors; Upper Mainshaft bearing; Mint dog teeth & Shift forks; No 3-4 synchro and 3-4 Slider. $125obo

SL4 RC 370's $150obo

Bare B16a2 Block with mains/Crank...$150.00shipped
DSM 450cc Injectors w/clips and resistors...$110.00shipped
Brand New b18B Timing Belt...$35.00shipped
New ARP B18B Head Studs...$90.00shipped
Walbro 255 Fuel Pump...$80.00shipped
Bare B16a2 Intake Manifold w/Throttle body...$30.00shipped
Comp Clutch Sprung 6puck w/2k & Pressure plate...$200.00shipped
ACT Street 12lb Flywheel w/2k...$200.00shipped

WTB:

JE pistons Must be Standard bore 81mm *NEW OR USED*
Cable B-series Tranny *MUST BE MINT*
B-series into EF Mounts *NEW OR USED*
Cable B-series Shift Linkage
OBD0 Alternator
OBD0 Starter


Modified by VRD^sam at 3:28 AM 8/8/2007

BIG FISH TUNING --getcha some!!!!!!!

camp1320 CAN EAT SH*T!

Brand Spanking new in the box with pins.

.25 oversized

$150

trades welcome

So CAL

Vouches:
JdmB16Eg6-GapxGuy-ww evo ix-MikeEM1-Fezzie-Laserjock-Master23-gabebauman-ColMustard-summit-joshcuhz-Rusty Shackleferd-bumsta217-joon joon-grg3135-snowboardgeek1

I want to buy Individual throttle bodies Off a AE111, 4age engine. PM me with what you got.

Thanks

http://www.honda-tech.com/zerothread?id=2065592

http://www.justiceracingengines.com/