|
mgags7
Gags Medal of Approval
Offline
13198 posts [99%]
The other side
3-25-2004
|
Where can you get:Adapter plate for the sh block to fit a regular midshaft?? Plastic js racing replica intakes
-Matt4g prelude part out - Fidanza 8lb FW - Exedy Stg1 Clutch Cheap!! WTB: 92-95 Civic Coupe Hood
|
Honda318dx
Will Race for Pizza
Offline
8024 posts [100%]
Culpeper VA
10-16-2000
|
Q) Where to find Balance Shaft Delete Kits?A) http://www.kaizenspeed.com
Corey Jacobs
2006 Honda Ridgeline RTL 
|
The Weather Man
Offline
3246 posts [98%]
The Wizard Of Oz, State Rd 1505 Section 8
6-20-2005
|
Q) Where can I find block guards?A) http://www.honda-performance.com
|
rockna92quelude
Offline
18 posts [99%]
that one place dunno
3-23-2005
|
i had the same problem and made a adapter bracket to bolt the shaft to the sh block from a pice of 1/4 plate steel measured like 4 by5 and measured the holes in the shaft bracket and then tapped those holes then drill the holes is the plate for the block... insert shaft to trans and then slide plate in to be bolted into place.. i was told that it would never work but its been in there for almost 15000 miles and ALOT of dragstrip time and no problems yet...
|
Shahigabothin
Offline
14 posts [100%]
AL
8-22-2005
|
Does anyone kno where i can get this front lip. I cant seem to find it any where, if someone knows where i can get it please post a link.
Modified by Shahigabothin at 3:29 PM 8/22/2005
|
Geeq
Offline
304 posts [99%]
Q.C. AZ
7-17-2003
|
| « Re: The "Where Can I get" this thread. (PrecisionH23a) | « » 10:54 PM 8/22/2005 |
Reply
Edit
|
Where can I get....Or do they make?The mounts for your Stock or OEM style hoods that can be lifted where the hood meets the windshield. I've seen it Searching for Pics of cars. It's a JDM style that you don't see here in the US...so I've heard. It creates a sort of Cowl induction by lifting the hood up an inch or two still using your stock hood. Does anyone klnow if there are any Kits or is it just custom fabrication???
................................................................................................... 
|
upallnite
Offline
134 posts [100%]
5-27-2005
|
| « Re: The "Where Can I get" this thread. (Geeq) | « » 4:44 AM 8/23/2005 |
Reply
Edit
|
I think I have seen what you are talking about. The car I saw with it just did it his self with longer bolts and washers as spacers. You can't raise it much if you want the latch to still work right.
|
LudeyKrus
Offline
4760 posts [100%]
Flowery Branch Ga
10-29-2002
|
| « Re: The "Where Can I get" this thread. (Geeq) | « » 3:34 PM 8/24/2005 |
Reply
Edit
|
| Quote, originally posted by Geeq » | | Where can I get....Or do they make? The mounts for your Stock or OEM style hoods that can be lifted where the hood meets the windshield. I've seen it Searching for Pics of cars. It's a JDM style that you don't see here in the US...so I've heard. It creates a sort of Cowl induction by lifting the hood up an inch or two still using your stock hood. Does anyone klnow if there are any Kits or is it just custom fabrication??? |
Ace Hardware/Fastenal. Get longer bolts and a handful of washers and go to town.
-Chase-
1992 Prelude w/ H23-VTEC...handbuilt by me
1991 MR2 Turbo
1982 GS450LMy Vouch Thread
We have now entered a period in history where we no longer have inalienable rights; we are merely recipients of heavily restricted, government granted privileges that can be receded on a whim. Our Constitution as amended has been effectively rendered null and void. The republic no longer exists as intended.
|
Shakes
Space Cadet
Offline
6076 posts [99%]
Spec Shakesland
11-26-2002
My Gallery
|
| « Re: The "Where Can I get" this thread. (Geeq) | « » 7:14 PM 8/25/2005 |
Reply
Edit
|
| Quote, originally posted by Geeq » | | Where can I get....Or do they make? The mounts for your Stock or OEM style hoods that can be lifted where the hood meets the windshield. I've seen it Searching for Pics of cars. It's a JDM style that you don't see here in the US...so I've heard. It creates a sort of Cowl induction by lifting the hood up an inch or two still using your stock hood. Does anyone klnow if there are any Kits or is it just custom fabrication??? |
JDM? if anything its SoCalDM. its a metal dowel cut about 3/4 of an inch or however far you want. however be careful, 1 - it looks like shit on ludes, 2 - its easy to break a window (done it myself), however it does let tons of heat out of the engine bay.
-Doug2006 Aspen White STi
1988 Rio Red CRX Si SMOKE FREE SINCE 10-31-04
|
IAluder95
Offline
656 posts [100%]
Des Moines iowa
6-6-2004
|
where can i get a Kit to use a B series Tranny?
BB SQUAD MEMBER #43
|
matix
Offline
1841 posts [100%]
Florida
7-23-2003
|
Q) Were can I get a adapter plate to mount a D-series tranny on a h22?
A) http://www.bisimoto.com/wst_page10.html
94 accord h22a-current
06 subaru STi-current
|
PreludeWhore
Offline
15 posts [100%]
Chicago IL
12-27-2004
|
| « Re: The "Where Can I get" this thread. (PrecisionH23a) | « » 7:52 PM 8/26/2005 |
Reply
Edit
|
Okay here it goes...flame suit on...WHO makes the side skirt? Where can I get them from..etc??? Thanks in advance!
DF
|
LudEnthusiast
Offline
336 posts [100%]
Canoga Park CA
9-27-2003
|
Looks like a VIS Mugen sideskirt to me.
Allan
'91 Toyota MR2 Turbo TD06 20G 2.2 Stroked
'99 Prelude Base 5MT Premium Pearl White - Sold
| Quote, originally posted by toyomatt84 » | | Wow, what happened here? Looks like someone sniffed a little too much house-hold cleanser. |
|
jg86hawk
Offline
26 posts [100%]
PR MI
7-10-2005
|
The picture you posted is named "mugensides"
MUST SELL:97 Honda Prelude Type SH. [url=http://www.honda-tech.com/zerothread?id=1343177[/url] Email me/PM me
|
PreludeWhore
Offline
15 posts [100%]
Chicago IL
12-27-2004
|
I'm hosting this picture (I got somewhere here or PO.com) I don't know who makes it, but it sure doesn't look like the real mugen.
|
clemsoncb7
Offline
1112 posts [100%]
Clemson SC
6-25-2004
|
(Q)where can I find a deck plate/torque plate for honing?
(A)www.f22parts.com(Q)where can I find JDM fogs, headlights, corners, etc.?
(A)www.passwordjdm.com (Q)Where can I get a beef and bean burrito?
(A) Taco Bell, duh
The artist formerly known as maxvtec7500....
http://www.hondamarketplace.com/zerothread/1896951
|
Jordans95si
Offline
631 posts [100%]
7-24-2005
|
where can i get some ngk spark plug wires and plugs for a good price
FS poker chips, stock exhaust, stock susp.WTB any lip kit for 4th gen. PM me or search my threads for a great deal on some wheels that i need to get out of the garage.
|
Paul H22A4
Offline
347 posts [100%]
Austin TX
5-31-2003
|
NGK Spark Plugs and Wires
http://www.importrp.com/home.php
bb6h22a is a good seller
|
The Birdman
Offline
1457 posts [99%]
Rednecks and heroin, my god they all fit in NCSU ME
11-7-2004
|
| « Re: The "Where Can I get" this thread. (PrecisionH23a) | « » 5:03 PM 8/29/2005 |
Reply
Edit
|
where can you find some polyurethane aftermarket motor mounts?
**MY PRELUDE IS FOR SALE http://www.hondamarketplace.co...76229**252whp h2b egg ----->Kansas City Shuffle FS/FT Thread Photobucket Album
|
Paul H22A4
Offline
347 posts [100%]
Austin TX
5-31-2003
|
| « Re: The "Where Can I get" this thread. (jd3jdm) | « » 8:38 PM 8/29/2005 |
Reply
Edit
|
| Quote, originally posted by jd3jdm » | | where can you find some polyurethane aftermarket motor mounts? |
inlinefour.com
bb6h22a is a good seller
|
The Birdman
Offline
1457 posts [99%]
Rednecks and heroin, my god they all fit in NCSU ME
11-7-2004
|
| « Re: The "Where Can I get" this thread. (Paul H22A4) | « » 9:48 PM 8/29/2005 |
Reply
Edit
|
If you are talking about the energy suspension ones, they aren't mounts, just inserts. I'm looking for the whole mount.
**MY PRELUDE IS FOR SALE http://www.hondamarketplace.co...76229**252whp h2b egg ----->Kansas City Shuffle FS/FT Thread Photobucket Album
|
Paul H22A4
Offline
347 posts [100%]
Austin TX
5-31-2003
|
| « Re: The "Where Can I get" this thread. (jd3jdm) | « » 11:01 AM 8/31/2005 |
Reply
Edit
|
| Quote, originally posted by jd3jdm » | | If you are talking about the energy suspension ones, they aren't mounts, just inserts. I'm looking for the whole mount. |
They sell both there. Mounts and Inserts http://www.enjoracing.com/engine_mounts_swap.html has some.
bb6h22a is a good seller
|
getbig
Offline
81 posts [100%]
Toronto ON
2-15-2005
|
Q) Carbon Fiber Cooling Shroud (Above the radiator)?
Vouce list: prelude1897, PrecisionH23a, Maxxxwell
|
dand39
Offline
106 posts [100%]
8-15-2003
|
Where can I find an intake chamber for a 4th Gen w/ H22?... provided there is one...
|
| | First 1 2 3 4 5 > Last |
