|
scrEaMO Kyle
I wanna Rock!!
Offline
1895 posts [100%]
Memphis/Knoxville TN
10-1-2002
|
iam interested in this too, i have a b16, thinking about an hx30....hmmm?
Danpat<3 is teh hawt kR3w Member: #009
|
soon2brb240
Offline
246 posts [98%]
Memphis sucks TN
1-21-2004
|
Bump for everyone online tonight, i'd really LOVE to see anything you have...
 i love yo Mammy -RedneckDave- for Accord forum mod!!! http://www.myspace.com/mikefuckyou
|
b16sedan
Offline
1049 posts [100%]
7-8-2004
|
Friend has one on his DSM Rebuilt 6 bolt with Wiseco pistons, eagle rods, 8.5:1 compression, sheetmetal intake, drag? turbonetics? random cast T3 manifold, tial 38mm gate, Holset HX35, AEM. Gone low 11's @ 120-124 on radials, it's a great turbo. 20 pounds of boost before 4000 RPM's on his 2.0, so probably a bit over 4000 on a 1.8. If I build a turbo motor for my 96 DX I'm definitely running this HX35 I have sittting here. It makes lots of power, spools quick, plus the ported shroud housing sounds damn cool 
1990 Sedan B16
1992 DX Hatch Z6
|
hoggy
Offline
404 posts [100%]
Anderson IN
2-3-2003
|
I had an hx35 on my b16, still have the turbo, might use it later down the road. I ran a 13.5 with some leaky ass charge pipes in my hatch at 9 psi and about 240hp. That turbo sounds so freaking cool. I loved it. I have a nice HKS 4" filter for it if anybody needs one.
92 CX w/B16a2, 2.5 inch exhaust, no cat
Ground Control, KYB AGX, Skunk2 camber plates
14.705@93.24(Falken Azenis, NA)
Holset HX35 @ 9psi
237hp 165tq
13.498 @ 109 (azenis)
blown turbo, blown motor
D16Z6 swap w/14b to comeEcu chipping and vtec conversions available
Ecu's for sale as well
PM or email me for more info
|
95cxh22a
Offline
756 posts [100%]
mississippi
10-3-2004
|
going on my b16a in my 95 cx is
crfab a/c equal length mani
h1c coldside and cartridge, with 12cm^2 hotside off of a hx35w
rc 550's on crome or uberdata
custom i/c piping
custom 3" exhaust
hks bov
tial 38mm .6 or .8 spring
jrc 8" fmic
magnaflow muff
or i may use a resenator off of a dodge diesel
all oil and return lines, exhaust, i/c piping will be custom made by me and a really good fabricating friend looking for a downpipe flange now. does anybody know if a regular 5 bolt will fit. i think i read somewhere that it wont. cant seem to find a vband flange that will fit.
none of my dodge friends have any left over. all exhaust will be made from dodge diesel exhaust which come with 3" mandrel bent from factory all i/c piping will be made from heavy duty truck radiator piping( they use steel pipes.)
sold to: boostinhard ,dyrcivic,phatboy5015
traded to: driftt
bought from: 93turbo16,honda9369,H-T JT0220 ::csracing ::soon2brb240 ::Honda4CX-T :: b18TurboEF:
bought from:95_integra  http://www.torqueaddicts.net
|
rhd
Offline
1872 posts [89%]
03 Sedona WRX
11-28-2004
|
i'm going to be using an HY35 on my GTi-R swapped sentra
|
scrEaMO Kyle
I wanna Rock!!
Offline
1895 posts [100%]
Memphis/Knoxville TN
10-1-2002
|
anymore?
Danpat<3 is teh hawt kR3w Member: #009
|
blundar
pay no attention to me
Offline
1219 posts [100%]
Cincinnati OH
8-14-2001
|
you guys with smaller (1.6, 1.8 non-vtec) motors should really think about using the HY-35 instead of the HX-35. They have a single undivided T3 flange 9 cm^2 exhaust housing that works out closer to a .48 A/R (the HX35 12 cm^2 ~= .63 AR, 16 cm^2 ~= .82AR) which will mean lightning fast spools compared to the HX35.Steven Dick has a HX35 on his built LS and was putting down solid mid-300s on 15psi and giving liter bikes a run for their money. I'm using a HY35 on my built LS when I finally get around to building it.
Formerly PGMFI's cheerleader... Now just tired and retired.Rubber Ducky Tuning - Blundar.com under construction.
eCtune-Neptune-PowerFC-Crome-Uberdata-Hondata-AEM-Autronic-more
For tuning in Cincinnati, OH - PM me for rates.
|
b16sedan
Offline
1049 posts [100%]
7-8-2004
|
| Quote, originally posted by blundar » | | Steven Dick has a HX35 on his built LS and was putting down solid mid-300s on 15psi and giving liter bikes a run for their money. |
Mid 300's at the wheel isn't enough to run with 1K CC bikes, unless by litre bikes you're talking about cruiser v-twin type 1000CC bikes  To keep up with a 600 CC bike you'll need a good amount of horsepower, 400-450 WHP depending on how light your car is.
1990 Sedan B16
1992 DX Hatch Z6
|
TurboJesse
B A N N E D
Offline
0 posts [0%]
Phoenix AZ
10-16-2002
|
| Quote, originally posted by b16sedan » | Mid 300's at the wheel isn't enough to run with 1K CC bikes, unless by litre bikes you're talking about cruiser v-twin type 1000CC bikes To keep up with a 600 CC bike you'll need a good amount of horsepower, 400-450 WHP depending on how light your car is. |
I can't speak about liter bikes personally but i have ran against a few 600's (01 r6 and a 99 zx6r ) on the highway with my old del sol. From a 45mph roll till about 120 it was very close. I was only making ~325whp (car trapped 121-122) A 450whp car will rape a bike on the highway..I used to get beat by turbo honda's making less than 400whp on my 600cc...they don't have much from a roll.
|
soon2brb240
Offline
246 posts [98%]
Memphis sucks TN
1-21-2004
|
This is all good news...I'm liking the responses! About the hy35, that sounds like a good idea, but I think that full boost at about 4400 is good enough for me. I made a turbo kit for a friend that hit full boost a 2800 on an LS in 1st gear with b16 tranny, it was cool, but no traction at all... I guess if I don't like the lag, I could always get the hy35 at a later date. Does anyone have a vid, or sound clip of this damn thing? I'm really excited to get all this together. I'm just waiting on my BMCrace manifold to arrive. I'm selling my t3/t04e turbo i've got now, because I just keep thinkin about the hx35
i love yo Mammy -RedneckDave- for Accord forum mod!!! http://www.myspace.com/mikefuckyou
|
DragSource
Offline
591 posts [100%]
Des Moines IA
7-6-2004
|
I'll be running one on a 83mm LSHoping for 500+ ETA approx 2 months.
Car part reviews
1/4 Mile Calculator
Future Auto Pictures and Info
|
scrEaMO Kyle
I wanna Rock!!
Offline
1895 posts [100%]
Memphis/Knoxville TN
10-1-2002
|
cool cool
Danpat<3 is teh hawt kR3w Member: #009
|
soon2brb240
Offline
246 posts [98%]
Memphis sucks TN
1-21-2004
|
Tell me more about the hy35...I'm trying to get to the magic 300whp with my stock LS. The guy that i'm getting the holset through has an hy35 in great condition, but not any good hx's...so I'm thinkin about running the hy. Does anyone have any experience with these? Should they be able to get me to my goal? Thanks guys
i love yo Mammy -RedneckDave- for Accord forum mod!!! http://www.myspace.com/mikefuckyou
|
drumking15
Offline
2918 posts [100%]
northern ma
1-30-2003
|
Ls/vtec
b18a block
1857cc
9:1 cr
81.5mm
89mm stroke
eagle rods
acl bearings
arias slugs
pnp gsr head
itr valves
all new seals to boot!!!
skunk2 mani
lightweight flywheel
gsr tranny
turbo crap:
780cc injectors
uberdata tuned
nuekin mani
tial 38mm gate
holset hx35 snail
w/ 3" vband dp
to open dp...
and also to stock exh
w/ recirculated wg
a/w intercooled
3bar map
avc-r
shooting for a decent 300 for the street...hopin around 10psi...
then 400 for the track...around 14-15... we'll see
OEP 4 Life...no other way to be
|
drumking15
Offline
2918 posts [100%]
northern ma
1-30-2003
|
| Quote, originally posted by drumking15 » | Ls/vtec
b18a block
1857cc
9:1 cr
81.5mm
89mm stroke
eagle rods
acl bearings
arias slugs
pnp gsr head
itr valves
all new seals to boot!!!
skunk2 mani
lightweight flywheel
gsr tranny
turbo crap:
780cc injectors
uberdata tuned
nuekin mani
tial 38mm gate
holset hx35 snail
w/ 3" vband dp
to open dp...
and also to stock exh
w/ recirculated wg
a/w intercooled
3bar map
avc-r
shooting for a decent 300 for the street...hopin around 10psi...
then 400 for the track...around 14-15... we'll see |
also just finished tuning idle...hopefully get uberdata dataloggin workin to tune this ont he streets monday ill have vids and plenty of info for you guys...then in about a month ill prob be heading to the dyno
OEP 4 Life...no other way to be
|
DragSource
Offline
591 posts [100%]
Des Moines IA
7-6-2004
|
I'm counting on you drum for the info on how it performs. . .my project is looking like it's going to take another month.I spent some of my money on something other than a car part for once (first time in over a year it seems) Delays delays, god damn hobby. Looking forward to seeing your results buddy.
Car part reviews
1/4 Mile Calculator
Future Auto Pictures and Info
|
soon2brb240
Offline
246 posts [98%]
Memphis sucks TN
1-21-2004
|
Well, since i'm just so impatient, I'm gonna go ahead and get the hy. I'll of course let everyone know how it does, i'm fully expecting it to be able to achieve my goals. Anyway guys, I'm lookin forward to seeing the vids and dyno's from everyone elses setup!
i love yo Mammy -RedneckDave- for Accord forum mod!!! http://www.myspace.com/mikefuckyou
|
drumking15
Offline
2918 posts [100%]
northern ma
1-30-2003
|
ya im quite eager to see how well this massive turbo is gonna be...ive always been about holsets...good turbo for unbeatable prices...
OEP 4 Life...no other way to be
|
powerofdreams8
Offline
517 posts [100%]
TX
1-22-2003
|
| Quote, originally posted by drumking15 » | | ya im quite eager to see how well this massive turbo is gonna be...ive always been about holsets...good turbo for unbeatable prices... |
I agree, you can't beat the price. I am running the HX35 on my B16; spool time is overrated. At 5000 rpms you had better be pointed in a straight line.
|
soon2brb240
Offline
246 posts [98%]
Memphis sucks TN
1-21-2004
|
| Quote, originally posted by powerofdreams8 » | | I agree, you can't beat the price. I am running the HX35 on my B16; spool time is overrated. At 5000 rpms you had better be pointed in a straight line. |
Hell yea, thats EXACTLY what I'm wanting to hear. But what do you think about the hy35 on an LS? I'm thinking like a 4000 full boost? Am I being too optomistic? Well, I guess i'll find out soon enough, but if anyone has any input, just lemme know!!
i love yo Mammy -RedneckDave- for Accord forum mod!!! http://www.myspace.com/mikefuckyou
|
powerofdreams8
Offline
517 posts [100%]
TX
1-22-2003
|
| Quote, originally posted by soon2brb240 » | | Hell yea, thats EXACTLY what I'm wanting to hear. But what do you think about the hy35 on an LS? I'm thinking like a 4000 full boost? Am I being too optomistic? Well, I guess i'll find out soon enough, but if anyone has any input, just lemme know!! |
Dude, don't sweat the spool time. Buy what is available, be it hx35 or hy35; whatever you can find a good deal on. I promise you won't be disappointed with either, it puts a smile on my face EVERYTIME I boost.
|
Speed PHreak
Offline
2120 posts [100%]
NC
6-11-2001
|
| Quote, originally posted by blundar » | | Steven Dick has a HX35 on his built LS and was putting down solid mid-300s on 15psi and giving liter bikes a run for their money. |
Thats mid-300's on 12psi Dave | Quote, originally posted by b16sedan » | Mid 300's at the wheel isn't enough to run with 1K CC bikes, unless by litre bikes you're talking about cruiser v-twin type 1000CC bikes To keep up with a 600 CC bike you'll need a good amount of horsepower, 400-450 WHP depending on how light your car is. |
I have an '88 CRX HF. It's an 1800lb car from the factory. It's got built 2L LS with an HX35 hanging off the front. I've run plenty of 600's, a built 750, and a new gixxer 1000. The only one that I couldn't over take was the gixxer 1000. He only gapped me by a bike length from 55~125.
Original poster, HX35 is a great turbo but it LIKES the big boost. You prolly won't be happy with it on the low(6~10psi) settings. The turbo really comes alive starting around 12~14psi, but hey it's made to run 16~20psi from the factory all the time. It's designed to run high pressure ratios on 6.0L diesel trucks not 6~8psi on a 1.8L 4 clyinder....Please consider the compressor maps that you can find on http://www.holset.com.
~~~~ '88 CRX HF ~~~~
Turbocharged Built 2.0L
|
soon2brb240
Offline
246 posts [98%]
Memphis sucks TN
1-21-2004
|
Yea, I hear ya and I am going to run right at 12 psi. This is going to be my first turbo honda, so I'm sure i'll be happy as long as it pulls until redline. I've been researching this stuff for so long, I'm just ready to get it running!
i love yo Mammy -RedneckDave- for Accord forum mod!!! http://www.myspace.com/mikefuckyou
|
| | First 1 2 3 4 5 > Last |
