Honda-Tech.com

Speakers Don't work.

LPrevolution23 — 2008-05-09T22:13:32-08:00

I just bought some speakers today for my 95 eg. They're 250 watt xplods. I know they're crappy blah blah I don't care, I just want sound. Anyway, I played the new speakers a little too loud and then all my speakers just suddenly stopped working. I was wondering if they're blown? I'm not completely sure. I just checked the cd player fuse on the deck and under the dash. If anyone knows the problem and can let me know i'd really appreciate it

what is the correct name please help

hrs-parker — 2008-05-09T22:17:21-08:00

i got my 98 gsr block but it didnt come with that coolant tube in the back...that metal one...what is the correct name for that because i need to order one..

and

that black breather tank or something in the back...its connected to the pcv valve or something..please help..i need to order those two so please help...

Turbo vs. Supercharger h22a

94jdmlude — 2008-05-09T22:12:38-08:00

I'm new to the honda world...suggestions and insights to pros and cons of both supercharger and turbo would greatly be appreciated

Should this cover sit tight Stupid but need help quickly

hometheaterman — 2008-05-09T22:05:57-08:00

This is on a 2006 Honda Accord V6 6speed if that matters. I took this piece and this tube out to change the high beam headlight bulb on this side. I was thinking this lid sat tight against the top of the tube but I didn't pay super close attention. Now that I have it ready to go back together it seem to sit maybe an inch above the tube. Do I have something wrong or is this how it should be? What exactly is this? Looks like a tube that would lead to a air intake but there is nothing at the top except this cover.

Here are pictures of what I'm talking about

Its the cover infront of the battery

Just want to make sure I'm doing everything right and if not what I should do differently. Thanks guys. Sorry for all the dumb questions.

couple pix of the dc.

Ludey849 — 2008-05-09T22:04:59-08:00

leme know what you guys think.

WTB stock crx engine, any trim

white90rexsi — 2008-05-09T22:01:50-08:00

Hello, I am looking for a stock d series motor for a 1990 crx. Does not matter with version. Email me at white90rexsi@aol.com if you have one. Looking for one cheap!

-Chris

FS: k20 Injectors,Fuel Pressure Regulator,Stock b16 Fuel rail,liquid fuel pressure gauge..

DopeEJ1-510 — 2008-05-09T21:52:37-08:00

k20 Injectors.. 80$..
Fuel Pressure Regulator.. 70$..
Stock b16 Fuel rail..
liquid fuel pressure gauge..
Make a Offer For the Rail and pressure Gauge..
Will do good deal if you buy the fuel rail complete..

FS: JDM EG6 headlights and MUGEN shift knob

shoryuuu — 2008-05-09T21:52:03-08:00

Sold my hatch last Oct., so the headlights and the shift knob been sittin in my closet since.
JDM EG6 headlights $120 obo
blue Mugen shift knob $50 obo

please call/text: 214 603 7721 ask for B

FS:TX real JDM Ver7 STI

choi0706 — 2008-05-09T21:49:25-08:00

$17,000 not titled

contact me at, low on PM inbox space
[EMAIL="choi0706@gmail.com"]choi0706@gmail.com[/EMAIL]

heres some dirty pics..

Turbo coolant help

OKCEM2 — 2008-05-09T21:48:01-08:00

Hey, I am preparing to install a turbo set up on my EM2 and was wondering the best way to send an engine coolant line. Help is most appreciated.

FS: DA 90-93 Integra UKDM Fog lights and USDM Tail lights

89Turbo_Angel — 2008-05-09T21:46:22-08:00

I have a very clean set of Euro/UKDM fog lights for a DA integra. These are super bright yellow. They use OEM H3 white bulbs, but give out that bright yellow Lexus look.

These are direct plug & play for 90-93 Integra's. You don't need to buy the expensive 1 piece headlights to get yellow fogs. No yellow light bult, yellow vinyl, or yellow paint can compare to these.

I'm asking $80 picked up in South Pasadena or $100 shipped.

Also have a set of USDM tail lights for a coupe. Asking $60 picked up for those or $85 shipped.

Header problem (99 si swapped gsr)

HondaBlock — 2008-05-09T21:45:21-08:00

Ok I was reading a on headers where a guy has swapped a gsr in his ex and is having trouble finding a header, ok here is my problem, I have a 99 Si and bought a header from ebay 4-1 (no bashing,lol) and it was for "all B series engines" ok well It hooked up fine to my B16A2 and cleared everything, but now that I have swapped in a GSR engine it will not clear my oil pan, the runners are to short and just seems overall that the header alone is to short, So what do I do, Iam kinda weiry about buying any "will fit ALL B series headers" deals now so what should i do, I have been looking at the JVTR " will fit all B series" 4-1 headers or the meagan 4-1 header... but i am having trouble deciding (yeah a tri-y i will get later on down the road but for now,lol) thanks for any help

here is a link to the JVTR header i was looking at http://www.erzperformance.com/...r.htm

Modified by HondaBlock at 9:52 PM 5/9/2008

headers smoke

noy612 — 2008-05-09T22:06:04-08:00

i recently put in new headers thru exhaust tip in my 91 honda accord ex 5 spd manual. before i put in the new parts, when i would start the car the headers would get hot fast in about 3-5 mins and sometimes get smokyy. after i put in the new parts its still the same... and smoke comes out da exhaust to... i need help please i dont know much about car

EF/CRX parts in NC.....

slojdmcrx — 2008-05-09T21:43:52-08:00

...dont get on here everyday,336 552 9687,keith..will ship,as you all know-the big stuff cost a leg to move,anyways..some new,some used.i got alot of stuff....... http://s132.photobucket.com/al...leave a message,ill call u back,will consider trades.lmk wassup.

FS: 2.5" ES TUNING muffler for DC2 $60 !!

Fat Chick Magnet — 2008-05-09T22:15:23-08:00

flat black 2.5" ES tuning muffler for DC2.. $60 picked up !! 818-823-3131
Muffler has been cut from the axle back..low miles muffler still in good condition.

located in GLENDALE, 818-823-3131

BUYER PLEASE MAP QUEST THIS ADDRESS
600 W Glenoaks Blvd
Glendale, CA 91202