Honda and Acura Model Specific Forums

Sirex · 10-16-2003, 09:38 PM

Im currently running turboedit now and wow... its very impressive car runs perfect... no problems... at all... cranks right on... i suggest all obd0 sohc folk to give it a try..

Modified by Sirex at 11:22 PM 10/21/2003

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

XDEep · 10-16-2003, 09:46 PM

Quote:

Originally Posted by Sirex

wow, i recently saw on a msg board of this tuning software for our crx/civic that are obd0. http://www.turboedit.org it handles boost and all motor stuff, i downloaded it and its very simple to use.. just need a chip burner and socket my ecu.. should be no more than 100 bucks...

Looks very impressive..

ya TurboEF9 is a very talented dood. simplicity is one of his main goals (purty graphics too) and im sure he'll be glad to hear it. for further tech info regarding pgmfi checkout http://www.pgmfi.com and the new knowledgebase at http://wiki.pgmfi.org

Project91CRX · 10-17-2003, 12:40 AM

just like ghettodyne.com that xtensive created. But he's no longer updating the software.

TurboEF9 · 10-17-2003, 08:49 AM

Whoa, hey!

Ya.. TurboEDIT, it's neato.

Heh..

Like Gettodyne? Ya.. but I think we've moved on to the next level, and xtensive is going to take a break from the ROM Editing scene.

Him and I have shared some ideas and long discussions. He's great!

TurboEDIT boasts lots of features for the user to help them get the best from thier tune. Like XDEep said, I've tried ot make things as easy to understand as possible so people don't start blowing up thier cars. Oh well.. Hope you all enjoy it.

Latest verison (at time of this post) is 1.27.. which now supports PR3 and PW0 ROMs for the DOHC VTec boys..

Anyway, if you have questions, comments, found a bugs, whatever.. sign up for the TurboEDIT Mailing List at http://www.TurboEDIT.org and send an e-mail to support@turboedit.org. Your mail will be promptly addressed my mailing list members!

Project91CRX · 10-17-2003, 09:33 AM

Quote:

Originally Posted by TurboEF9

Whoa, hey!

Ya.. TurboEDIT, it's neato.

Heh..

Like Gettodyne? Ya.. but I think we've moved on to the next level, and xtensive is going to take a break from the ROM Editing scene.

Him and I have shared some ideas and long discussions. He's great!

TurboEDIT boasts lots of features for the user to help them get the best from thier tune. Like XDEep said, I've tried ot make things as easy to understand as possible so people don't start blowing up thier cars. Oh well.. Hope you all enjoy it.

Latest verison (at time of this post) is 1.27.. which now supports PR3 and PW0 ROMs for the DOHC VTec boys..

Anyway, if you have questions, comments, found a bugs, whatever.. sign up for the TurboEDIT Mailing List at http://www.TurboEDIT.org and send an e-mail to support@turboedit.org. Your mail will be promptly addressed my mailing list members!

Yea, xtensive did mention on thezcr that he's passing the project over to Jason. So i guess that's you! Nice job with the next step.

Ash J. Williams · 10-17-2003, 11:56 AM

Quote:

Originally Posted by TurboEF9

Whoa, hey!

Ya.. TurboEDIT, it's neato.

Heh..

Like Gettodyne? Ya.. but I think we've moved on to the next level, and xtensive is going to take a break from the ROM Editing scene.

Him and I have shared some ideas and long discussions. He's great!

TurboEDIT boasts lots of features for the user to help them get the best from thier tune. Like XDEep said, I've tried ot make things as easy to understand as possible so people don't start blowing up thier cars. Oh well.. Hope you all enjoy it.

Latest verison (at time of this post) is 1.27.. which now supports PR3 and PW0 ROMs for the DOHC VTec boys..

Anyway, if you have questions, comments, found a bugs, whatever.. sign up for the TurboEDIT Mailing List at http://www.TurboEDIT.org and send an e-mail to support@turboedit.org. Your mail will be promptly addressed my mailing list members!

Any ideas on how to implement points adjusting for those with a strange vaccum scale, i.e. ITBs, or a lumpy cam.
stan

subgeniusdude · 10-17-2003, 07:12 PM

Looks cool!I like the real time datalogger,but,how do you read information from the ECU with your PC?Is there some kind of harness you can use?

Sirex · 10-17-2003, 09:54 PM

Quote:

Originally Posted by subgeniusdude

Looks cool!I like the real time datalogger,but,how do you read information from the ECU with your PC?Is there some kind of harness you can use?

Max233 Serial port onto the ecu, then a serial cable to your pc.. well inside a car you would have a laptop.. im soon adding this support to my chipped pm6

i currently use turboedit... Excellent software for running lower boost levels (10psi)
hopefully one day it can grow and support 3bar map sensors and become superb and still remain free

Hybridize · 10-17-2003, 10:46 PM

dingusjt · 10-18-2003, 12:27 AM

glad to see that the map library is in place...very nice addition which i don't remember finding on the ghettodyne site or pgmfi.org!!

NathanMorris · 10-18-2003, 12:53 AM

deffinately great information for you OBD0 folks, I've been doing a lot of work with the P28, but the PM6 ECU is also a really neat one to work with.

Have fun!

- Nathan

Sirex · 10-19-2003, 04:28 PM

yup.. soon my pm6 will be vtec capable. =D

DsMWookie · 10-19-2003, 04:54 PM

do they have abase map in their for the crx ECU that is the pm6 right?

IggDawg · 10-19-2003, 07:11 PM

I'm looking into turbo'ing sometime soon and I wet myself when I saw this program. I'd been worrying about management and this seems to solve a lot of my problems. still need to read up a lot on setting up the whole management sytems and whatnot. but this program is definitely cool.

Ash J. Williams · 10-19-2003, 07:37 PM

Quote:

Originally Posted by FMX

do they have abase map in their for the crx ECU that is the pm6 right?

yes, most stock bin files are available online.
runnung MMR maps right now, seems to have more midrange.
stan

91civicDXdude · 10-20-2003, 12:54 AM

YOU NEED TO PUT TETRIS IN TURBOEDIT

IggDawg · 10-21-2003, 12:32 PM

Quote:

Originally Posted by Sirex

Max233 Serial port onto the ecu, then a serial cable to your pc.. well inside a car you would have a laptop.. im soon adding this support to my chipped pm6

hey, could you post a link to where it talks about doing this? I looked around pgmfi and everywhere else. everyone talks about chipping but I haven't seen a writeup on adding a serial port.

tgreaves · 10-21-2003, 01:16 PM

Quote:

Originally Posted by Sirex

wow, i recently saw on a msg board of this tuning software for our crx/civic that are obd0. http://www.turboedit.org it handles boost and all motor stuff, i downloaded it and its very simple to use.. just need a chip burner and socket my ecu.. should be no more than 100 bucks...

Looks very impressive..

Yeah.. Check out pgmfi.org.. They are the home of DIY honda tuning..

Speed PHreak · 10-21-2003, 01:25 PM

Quote:

Originally Posted by tgreaves

Yeah.. Check out pgmfi.org.. They are the home of DIY honda tuning..

Finally someone mentioned it

b16_madman · 10-21-2003, 04:34 PM

Grr...has this been like a Honda-tech secret or something? The first time I've heard of any of this from this post.
So now where to get the additional components to hook up a rice boy laptop to my ecu? Sarcastic, but serious at the same time.
Now to learn about this new program...

IggDawg · 10-21-2003, 05:01 PM

I asked the same thing. I looked a little deeper into the pgmfi site... go into their "Wiki" program, and look up data logging. you can find the pinouts for the spare comms port on the PM6 there. also, tehy tell you what chip you need to translate the TTL language to RS-232.

STILL, it'd be cool if there was a step-by-step writeup for those of us that are more timid and lack the confidence to do any ****ing thing without step-by-step instructions no matter how well the concept is understood. people like me :D .

XDEep · 10-21-2003, 05:44 PM

Quote:

Originally Posted by B16_madman

Grr...has this been like a Honda-tech secret or something? The first time I've heard of any of this from this post.
So now where to get the additional components to hook up a rice boy laptop to my ecu? Sarcastic, but serious at the same time.
Now to learn about this new program...

yea its been mentioned here a while ago but no one really seemed to care, or probably just didnt notice. its still in its infancy imo.

the more friendly version of all this info just recently started development at http://wiki.pgmfi.org
should have everything you need to get started.

EARLdaSQUIRREL · 10-21-2003, 06:11 PM

it would be really nice if someone could do a how-to on this

i have a dohc zc ran with a pm6 ecu and id love to get this going, it would save lots of money and be a great tool

what is needed to do this, i downloaded the turboedit v.1.2.9 but i have no idea how to set up a base for my pm6

i plan on running boost on my car and was wondering how much boost this can support

i planned on doing pistons/rods and running dsm 450's and run 8 pounds stock and make a map for 12 or maybe a bit more for the track

is there any dyno's that would understand how to use this program?

any answers are appreciated

Sirex · 10-21-2003, 08:21 PM

GUIDE TO CHIPPING YOUR PM6

http://www.driftkids.com/index...6Chip

IggDawg · 10-22-2003, 06:19 AM

Thank you VERY much for that linky.

I nominate this thread for a sticky. there is an unparalleled amount of useful information, and links to even more useful information. this is a great resource for any tuner.

10-17-2003, 08:49 AM	#4
TurboEF9 Join Date: Jan 2003 Location: Kansas City, MO, US Posts: 53	Re: Whoa, hey! Ya.. TurboEDIT, it's neato. Heh.. Like Gettodyne? Ya.. but I think we've moved on to the next level, and xtensive is going to take a break from the ROM Editing scene. Him and I have shared some ideas and long discussions. He's great! TurboEDIT boasts lots of features for the user to help them get the best from thier tune. Like XDEep said, I've tried ot make things as easy to understand as possible so people don't start blowing up thier cars. Oh well.. Hope you all enjoy it. Latest verison (at time of this post) is 1.27.. which now supports PR3 and PW0 ROMs for the DOHC VTec boys.. Anyway, if you have questions, comments, found a bugs, whatever.. sign up for the TurboEDIT Mailing List at http://www.TurboEDIT.org and send an e-mail to support@turboedit.org. Your mail will be promptly addressed my mailing list members! __________________ My ECU pwn3d and operated by TurboEDIT and PGMFI.org. Werd. PGMFi.org- Stylin' profilin' ECU Madness, ya dig? [TurboEDIT]: "Yes, another ROM editor..." http://www.TurboEDIT.org

10-17-2003, 07:12 PM	#7
subgeniusdude Junior Member Join Date: Oct 2002 Location: deliverance country, tn, usa Posts: 427	Re: Woah! Cool Free Tuning Software for PM6 Ecu's (Sirex) Looks cool!I like the real time datalogger,but,how do you read information from the ECU with your PC?Is there some kind of harness you can use? __________________ Glenn 88 SiR converted EF

10-17-2003, 10:46 PM	#9
Hybridize Join Date: Sep 2003 Location: Washington, USA Posts: 301	__________________ '90 CRX Si - B20B - S1/LS5th Best MPG to date. 42.24, route driven.http://images.honda-tech.com/set1/smile/embeer.gif My vouch thread.

10-18-2003, 12:27 AM	#10
dingusjt Member Join Date: Apr 2002 Location: Long Beach, CA Posts: 1,888	Re: (Hybridize) glad to see that the map library is in place...very nice addition which i don't remember finding on the ghettodyne site or pgmfi.org!! __________________ TKE

10-18-2003, 12:53 AM	#11
NathanMorris Member Join Date: Mar 2003 Location: The Internets Posts: 1,155	Re: (dingusjt) deffinately great information for you OBD0 folks, I've been doing a lot of work with the P28, but the PM6 ECU is also a really neat one to work with. Have fun! - Nathan __________________ Doing an H22 Swap? Ultimate H22 Swap Guide

10-17-2003, 12:40 AM	#3
Project91CRX Junior Member Join Date: Mar 2003 Posts: 313	just like ghettodyne.com that xtensive created. But he's no longer updating the software.

10-19-2003, 04:28 PM	#12
Sirex Junior Member Join Date: Oct 2002 Location: Philadelphia, PA, USA Posts: 448	Re: (92Lx) yup.. soon my pm6 will be vtec capable. =D __________________ 91 crx si SOHC VTEC(Z6) Turbo(VFIHI) @ 10psi 2001 VW GTI 1.8T @ 1.1 Bar Both... Slow!! =/

10-19-2003, 04:54 PM	#13
DsMWookie Junior Member Join Date: Aug 2002 Location: Birmingham, Alabama, United States Posts: 872	Re: (Sirex) do they have abase map in their for the crx ECU that is the pm6 right? __________________ AIM: dsmwookie Phone: 205 401 3379 Vouch Thread: http://www.honda-tech.com/zerothread?id=1071828

10-19-2003, 07:11 PM	#14
IggDawg Join Date: Sep 2003 Location: Sterling, MA, USA Posts: 254	I'm looking into turbo'ing sometime soon and I wet myself when I saw this program. I'd been worrying about management and this seems to solve a lot of my problems. still need to read up a lot on setting up the whole management sytems and whatnot. but this program is definitely cool. __________________ -IggDawg 1994 SVX LSi, Barcelona Red 1990 CRX Si, Y-49 yellow.

10-20-2003, 12:54 AM	#16
91civicDXdude Member Join Date: May 2003 Location: Saint Joseph, MO, USA Posts: 2,161	YOU NEED TO PUT TETRIS IN TURBOEDIT __________________ '94 Del Sol VTEC - T3/T04E E85 Tuned on Crome

10-21-2003, 04:34 PM	#20
b16_madman Member Join Date: Nov 2002 Location: GA Posts: 6,718	Re: Woah! Cool Free Tuning Software for PM6 Ecu's (Sirex) Grr...has this been like a Honda-tech secret or something? The first time I've heard of any of this from this post. So now where to get the additional components to hook up a rice boy laptop to my ecu? Sarcastic, but serious at the same time. Now to learn about this new program... __________________ donnanphotography \| crx \| m coupe

10-21-2003, 05:01 PM	#21
IggDawg Join Date: Sep 2003 Location: Sterling, MA, USA Posts: 254	I asked the same thing. I looked a little deeper into the pgmfi site... go into their "Wiki" program, and look up data logging. you can find the pinouts for the spare comms port on the PM6 there. also, tehy tell you what chip you need to translate the TTL language to RS-232. STILL, it'd be cool if there was a step-by-step writeup for those of us that are more timid and lack the confidence to do any ****ing thing without step-by-step instructions no matter how well the concept is understood. people like me :D . __________________ -IggDawg 1994 SVX LSi, Barcelona Red 1990 CRX Si, Y-49 yellow.

10-21-2003, 06:11 PM	#23
EARLdaSQUIRREL official honda whore 1994 Acura Integra Join Date: Nov 2002 Location: not tellin you where, pa, usa Posts: 7,675	it would be really nice if someone could do a how-to on this i have a dohc zc ran with a pm6 ecu and id love to get this going, it would save lots of money and be a great tool what is needed to do this, i downloaded the turboedit v.1.2.9 but i have no idea how to set up a base for my pm6 i plan on running boost on my car and was wondering how much boost this can support i planned on doing pistons/rods and running dsm 450's and run 8 pounds stock and make a map for 12 or maybe a bit more for the track is there any dyno's that would understand how to use this program? any answers are appreciated __________________ IMW:speed-theory:j-k-tuning:thmotorsports.com my "h-t" build thread 09/10 http://hondamarketplace.com/showthread.php?t=2612869

10-21-2003, 08:21 PM	#24
Sirex Junior Member Join Date: Oct 2002 Location: Philadelphia, PA, USA Posts: 448	Re: (coptzer) GUIDE TO CHIPPING YOUR PM6 http://www.driftkids.com/index...6Chip __________________ 91 crx si SOHC VTEC(Z6) Turbo(VFIHI) @ 10psi 2001 VW GTI 1.8T @ 1.1 Bar Both... Slow!! =/

10-22-2003, 06:19 AM	#25
IggDawg Join Date: Sep 2003 Location: Sterling, MA, USA Posts: 254	Re: (Sirex) Thank you VERY much for that linky. I nominate this thread for a sticky. there is an unparalleled amount of useful information, and links to even more useful information. this is a great resource for any tuner. __________________ -IggDawg 1994 SVX LSi, Barcelona Red 1990 CRX Si, Y-49 yellow.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search