PBK's batman crx b17a1 tuck super herooo'd
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
PBK's batman crx b17a1 tuck super herooo'd
traded my 98 si for this bondo 1/4'd 1990 crx dx auto what was i thinking haha
boom went the zc
b18a1 chillin
new tools
needed a poop mid sanding........ kay back at it
at least another 100 pics more to come i'll post more of what ive done ,i have some work to do haha
boom went the zc
b18a1 chillin
new tools
needed a poop mid sanding........ kay back at it
at least another 100 pics more to come i'll post more of what ive done ,i have some work to do haha
#6
Honda-Tech Member
Join Date: Jan 2009
Location: Fredericksburg,VA
Posts: 1,017
Likes: 0
Received 0 Likes
on
0 Posts
Re: PBK's batman crx b17a1 tuck super herooo'd
the poop picture caught me off guard.
props for taking this job on. any idea how much you have in body panels? my 94 coupe needs a quarter on the left side, and everywhere ive looked is crazy expensive...
good luck dude
props for taking this job on. any idea how much you have in body panels? my 94 coupe needs a quarter on the left side, and everywhere ive looked is crazy expensive...
good luck dude
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: PBK's batman crx b17a1 tuck super herooo'd
full stainless exhaust i'm workin on magaflow muffler resinator and magnaflow tip
skirts i'm allso working on
93 GSR b17a1 and ys1 trans low km'S 170 compression across
frost bite i got lifting it into the back of the truck when my engine hoist was being a ***** haha
new digi caliper
out comes the b18a1
b17a1 in for a minute
strippin the interior
gross
engine harness
bye bye facker
the dizzy wires confussed me but i think ig ot it now ,we shall see i guess
got a few aphenal military plug for the fire wall
changed my bedroom around to bring the b17a1 in for the tuck harness
lots of plugs ...mad coin too haha
batman headliner material
stupid bolt broke so i cut the strut off ...fack it eh boys haha
my poor malibu
Vdub cabriolet fender flares
#10
Honda-Tech Member
Join Date: Jun 2007
Location: santa ana, ca, us
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Re: PBK's batman crx b17a1 tuck super herooo'd
for the amount of rust that car had i thought you may have bought my old crx..but im in California.the pooping was shocking but i recovered..the progress is moving along quick and im liking the build,cant wait to see MOAR!!...
#11
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: PBK's batman crx b17a1 tuck super herooo'd
looking so much better already
finishin up a few loose ends
and one last pic for the night
how she sits right now
#12
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
#13
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: PBK's batman crx b17a1 tuck super herooo'd
lol how about this one guy
RAWR !!!
OMG where is my head :0
look cracked out haha
thanks ya its gettin there
thanks
lol manitoba canada
lol ya i tend to throw messed up stuff out there ,glad u like it and stay tuned ,only more crazy batman crx ish to come
#15
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
#18
Honda-Tech Member
Re: PBK's batman crx b17a1 tuck super herooo'd
Im not a big fan of body kits. But this car has been brought back from way beyond the dead, so he can make it look however he wants to.
#19
Honda-Tech Member
Join Date: Dec 2005
Location: NE Washington, USA
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
Re: PBK's batman crx b17a1 tuck super herooo'd
Ruin? I get the feeling you haven't seen his other builds. This could be painted Neon orange for all I care, and it still wouldn't be ruined. Because as I see it, as bad of condition all the rot and other damage on this car, it's lucky it's not at the crusher already.
So give him a break, who f*cking cares if it isn't "JDM Trendy".
So give him a break, who f*cking cares if it isn't "JDM Trendy".
#21
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: PBK's batman crx b17a1 tuck super herooo'd
picked up a new hose and reel to make clean up and storage a bit easier when i set up for paint this time around 50' it says i dunno,but this hose is junk,ive had it before and manitoba winters breaks it like nothing haha
more wire,heat shrink ,should be enough now to finish up i think (shrugs)
whats that wire for there guys ? i was like oh crap wtf is that from again lol i'll have to send it back into the car i guess ,but unsure what its for
this guy is next,moving it onto the passenger side,then i will bring the engine and harness out to the garage once more to finish up and add the plugs at the fire wall
woooo getting close NANANANANANA BATMAN CRX LMAO
oh and check out this video of me fighting with my girl to bring the GSR in the house haha
http://www.youtube.com/watch?v=fZg4tHdOPDg
more wire,heat shrink ,should be enough now to finish up i think (shrugs)
whats that wire for there guys ? i was like oh crap wtf is that from again lol i'll have to send it back into the car i guess ,but unsure what its for
this guy is next,moving it onto the passenger side,then i will bring the engine and harness out to the garage once more to finish up and add the plugs at the fire wall
woooo getting close NANANANANANA BATMAN CRX LMAO
oh and check out this video of me fighting with my girl to bring the GSR in the house haha
http://www.youtube.com/watch?v=fZg4tHdOPDg
#23
Honda-Tech Member
Join Date: Apr 2006
Location: Manteca, CA
Posts: 2,261
Likes: 0
Received 0 Likes
on
0 Posts
Re: PBK's batman crx b17a1 tuck super herooo'd
oh and check out this video of me fighting with my girl to bring the GSR in the house haha
http://www.youtube.com/watch?v=fZg4tHdOPDg
#24
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: PBK's batman crx b17a1 tuck super herooo'd
thanks guy
LOL okay i'm sorry i'll stop doing everything i like for some random alright...pfft riiight haha
no doubt like BATMAN
lol thats for the support bud appreciate it.ya funnt thing is i allmost bought it off the guy before the guy i traded it from,but it was red and rusted pretty bad,but it had the ZC and knew i could make it into something...messed up thing is i found a forsale thread on this car on another site and dude was asking $3000 LMAO... okay like that would happen haha
BATMAN!!!
yes sir it is thanks for looking
lol i took the joking method to the fight and put on my hickest voice i could haha.she didnt know i was recording and well wasnt happy i brought my engine into the house or the bedroom rather haha i would have put it in my portch,but i just got a weider gym and well puttin it in the corner of my room just made things so much easier haha
so i did the drivers side chassis/engine harness plug
chillin on the passenger side ,should be enough now
so now i have to cut and mark the engine harness plugs and cut them and start soldering them to the military plug ,reason i'm going this route and having to areas of connection is so lets say down the road i want to pull it all out or something ,i can pull out the military plug and some of the chassis harness and be able to just plug it back in ...pretty much like a dizzy jumper harness
untill next time...same batman time,same batman thread
god i'm gay haha
Ruin? I get the feeling you haven't seen his other builds. This could be painted Neon orange for all I care, and it still wouldn't be ruined. Because as I see it, as bad of condition all the rot and other damage on this car, it's lucky it's not at the crusher already.
So give him a break, who f*cking cares if it isn't "JDM Trendy".
So give him a break, who f*cking cares if it isn't "JDM Trendy".
BATMAN!!!
yes sir it is thanks for looking
lol i took the joking method to the fight and put on my hickest voice i could haha.she didnt know i was recording and well wasnt happy i brought my engine into the house or the bedroom rather haha i would have put it in my portch,but i just got a weider gym and well puttin it in the corner of my room just made things so much easier haha
so i did the drivers side chassis/engine harness plug
chillin on the passenger side ,should be enough now
so now i have to cut and mark the engine harness plugs and cut them and start soldering them to the military plug ,reason i'm going this route and having to areas of connection is so lets say down the road i want to pull it all out or something ,i can pull out the military plug and some of the chassis harness and be able to just plug it back in ...pretty much like a dizzy jumper harness
untill next time...same batman time,same batman thread
god i'm gay haha
#25
Honda-Tech Member
Join Date: Dec 2005
Location: NE Washington, USA
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
Re: PBK's batman crx b17a1 tuck super herooo'd
Yea, I'm also a member on the main CRX site, if you know what I mean. So I watch your threads over there mainly. Mostly because the lack of haters and such.