Honda and Acura Technical Forums

chad · 11-01-2009, 04:36 PM

TITLED VEHICLES ONLY

This thread will be heavily moderated!

Chad

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

Lo-Buck EF · 11-11-2009, 07:53 PM

gone

dasreedster · 11-17-2009, 01:31 PM

91 civic built for NASA honda challenge H2 class. Its about 95% finished, needs some safety equiptment(harness, fire system etc.) and better brakes(stock at the moment) to be competitive in H2.

B16 w/ stock bottom end, rebuilt head with 3 angle valve job by Vellios in So Cal, USDM ITR cams. Made 170 whp with a set of skunk 2 cams before the head was rebuilt

ARP head studs

Blox intake manifold

Baffled oil pan

New oil pump

Toda Header

Skunk 2 cam gears

Skunk 2 valve springs

fidanza aluminum flywheel

exedy stage 1 clutch

Apexi World Sport 2 Exhaust

Hondata phenolic manifold gasket

AEM fuel rail

B&M fuel pressure gauge

B&M fuel pressure regulator

P28 ECU obd1 (socketed and tuned w/ crome, will need some tuning for the ITR cams)

Griffin Radiator and Samco hoses

Spal 12" Fan

Setrab oil cooler(new, not installed)

Koni Sport re-valved to SPSS3 specs with 650lb front springs and 800lb rears and ground control shock mounts front and rear

Energy Suspension poly bushings

Odyssey battery

Rota Slipstreams 15X7.5 with new/old avons mounted(wheels are new, tires are new but aged)
Sparco Corsa seat

YS1 cable trans with quaife diff

Tilton brake proportioning valve(new installed)

Brand new Master Cylinder(integra I think, I know its bigger than what was originally on the car)

Stock brakes, have complete integra rear control arms with disc brakes

The cage was custom built at Dynamic Racing Solutions in La Habra, NASA and SCCA legal w/ nascar style bars on the drivers side, and a standard "X" on the passenger side.

The main hoop and down tubes are 1.75" X .120" DOM, the rest of the tubing is 1.5" X .095" DOM.

Email or call me with any questions. Asking $7500 obo. Come check it out and make me an offer! This car is NOT street legal! The car is located in Monrovia, So Cal. Can deliver within 100 miles of Los Angeles.

Pics can be seen here, or email me.

http://www.facebook.com/album.php?ai...4&l=03846fb585

kostritzer@gmail.com
562-533-4701

11-11-2009, 07:53 PM	#2
Lo-Buck EF Member Join Date: Oct 2001 Location: dumpster divin for ra1s, NY Posts: 5,209	Re: FS: Nov/Dec Racecars ONLY gone __________________ 2009 NEHC H2 Champ AJ Nealey Racing MLR Motorsports East Coast Honda Challenge Last edited by Lo-Buck EF; 11-18-2009 at 02:05 PM.

11-17-2009, 01:31 PM	#3
dasreedster Junior Member Join Date: May 2007 Location: Monrovia, CA, USA Posts: 23	91 Civic NASA H2 So Cal 91 civic built for NASA honda challenge H2 class. Its about 95% finished, needs some safety equiptment(harness, fire system etc.) and better brakes(stock at the moment) to be competitive in H2. B16 w/ stock bottom end, rebuilt head with 3 angle valve job by Vellios in So Cal, USDM ITR cams. Made 170 whp with a set of skunk 2 cams before the head was rebuilt ARP head studs Blox intake manifold Baffled oil pan New oil pump Toda Header Skunk 2 cam gears Skunk 2 valve springs fidanza aluminum flywheel exedy stage 1 clutch Apexi World Sport 2 Exhaust Hondata phenolic manifold gasket AEM fuel rail B&M fuel pressure gauge B&M fuel pressure regulator P28 ECU obd1 (socketed and tuned w/ crome, will need some tuning for the ITR cams) Griffin Radiator and Samco hoses Spal 12" Fan Setrab oil cooler(new, not installed) Koni Sport re-valved to SPSS3 specs with 650lb front springs and 800lb rears and ground control shock mounts front and rear Energy Suspension poly bushings Odyssey battery Rota Slipstreams 15X7.5 with new/old avons mounted(wheels are new, tires are new but aged) Sparco Corsa seat YS1 cable trans with quaife diff Tilton brake proportioning valve(new installed) Brand new Master Cylinder(integra I think, I know its bigger than what was originally on the car) Stock brakes, have complete integra rear control arms with disc brakes The cage was custom built at Dynamic Racing Solutions in La Habra, NASA and SCCA legal w/ nascar style bars on the drivers side, and a standard "X" on the passenger side. The main hoop and down tubes are 1.75" X .120" DOM, the rest of the tubing is 1.5" X .095" DOM. Email or call me with any questions. Asking $7500 obo. Come check it out and make me an offer! This car is NOT street legal! The car is located in Monrovia, So Cal. Can deliver within 100 miles of Los Angeles. Pics can be seen here, or email me. http://www.facebook.com/album.php?ai...4&l=03846fb585 kostritzer@gmail.com 562-533-4701

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search