Honda and Acura Technical Forums

.CUBISH. · 08-09-2009, 10:35 AM

here's a customers pretty simple build

stock bore k24 block
12.5 to 1 compression
ported k20a2 head
blueprint stage 3 cams
ported rbc
hytech knock off header
650cc injectors
e85

going to try a big tube 4-1 ssr header on it this week

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

Chef Andre · 08-09-2009, 11:09 AM

Nice numbers.

joel26 · 08-09-2009, 11:39 AM

could this set up work with the k20 complete engine or do u have to swap and do k24 block and k20 head or is there a difference ?

JDM JEFFREY · 08-09-2009, 11:44 AM

sick numbers

.CUBISH. · 08-09-2009, 02:19 PM

Quote:

Originally Posted by joel26

could this set up work with the k20 complete engine or do u have to swap and do k24 block and k20 head or is there a difference ?

not too sure what ur asking

K20egcw · 08-09-2009, 02:48 PM

Nice numbers!! Keep up the nice work

pgpbubble · 08-09-2009, 03:55 PM

I wouldnt really consider a ported head and rbc a simple setup. but good numbers.

ALLxMOTOR EG · 08-09-2009, 04:01 PM

Nice numbers indeed.

B16Civic93 · 08-09-2009, 07:32 PM

whats an rbc?

n/ahonda97 · 08-09-2009, 08:31 PM

that is a lite in the dark tunnel i am walking in,(k24/k20)

neo_ · 08-10-2009, 05:07 AM

Quote:

Originally Posted by B16Civic93

whats an rbc?

The piston ring brand.

Kidnkorner · 08-10-2009, 05:18 AM

What is the point of this? Where is the technical aspect of this thread? Looks more like a brag thread and you are looking for kudos.

Quote:

Originally Posted by B16Civic93

whats an rbc?

RBC is the intake manifold from the Accord Euro R and the current gen Civic Si

Quote:

Originally Posted by neo_

The piston ring brand.

You are joking, right?

neo_ · 08-10-2009, 05:24 AM

Quote:

Originally Posted by Kidnkorner

You are joking, right?

Sorry, I actually meant rod bearings.

evertp1 · 08-10-2009, 05:49 AM

Quote:

Originally Posted by joel26

could this set up work with the k20 complete engine or do u have to swap and do k24 block and k20 head or is there a difference ?

The K24 will give you that amount of torque. the K20 will not

.CUBISH. · 08-10-2009, 08:15 AM

Quote:

Originally Posted by pgpbubble

I wouldnt really consider a ported head and rbc a simple setup. but good numbers.

this motor has all off the shelf parts.. id say its pretty simple

Quote:

What is the point of this? Where is the technical aspect of this thread? Looks more like a brag thread and you are looking for kudos

the point is to show how simple it is to make power with one of these motors.. brag?....please, its a customers car not mine... people sit and post graphs of 170-200hp n/a cars all day and u want to cry cause i post a graph of a 280hp car and actually give a spec list

Kidnkorner · 08-10-2009, 08:43 AM

Quote:

Originally Posted by .CUBISH.

brag?....please, its a customers car not mine...

If it isn't bragging then what is it, advertising? I can read between the lines and I'd say it's a little of both.

Your post isn't even technical.

rick_rabies · 08-10-2009, 08:56 AM

he was just showing how easy you can build a K24 all motor. relax. it actually helped me understand what i would need in my build since i will be doing sumthing similar...so chilllll

solo227 · 08-10-2009, 09:30 AM

Quote:

Originally Posted by .CUBISH.

not too sure what ur asking

he asking can he have a dyno graph looking like that without using they k24 bottom end...

And its not gonna happen...

solo227 · 08-10-2009, 09:32 AM

Quote:

Originally Posted by Kidnkorner

If it isn't bragging then what is it, advertising? I can read between the lines and I'd say it's a little of both.

Your post isn't even technical.

take the prick our your ass... LOL

slammed_93_hatch · 08-10-2009, 12:40 PM

Quote:

Originally Posted by Kidnkorner

If it isn't bragging then what is it, advertising? I can read between the lines and I'd say it's a little of both.

Your post isn't even technical.

did you miss the first post in this forum by GK?

Anything goes... no need to try and be a moderator..

I think its nice to see spec lists with dyno numbers.

.CUBISH. · 08-10-2009, 06:24 PM

Quote:

Originally Posted by Kidnkorner

If it isn't bragging then what is it, advertising? I can read between the lines and I'd say it's a little of both.

Your post isn't even technical.

there is already one person in this thread that found my post useful...if u dont like it i dont really care..

so everyone that posted a dyno sheet with a spec list is bragging or trying to sell something?

n/ahonda97 · 08-10-2009, 06:47 PM

Quote:

Originally Posted by rick_rabies

he was just showing how easy you can build a K24 all motor. relax. it actually helped me understand what i would need in my build since i will be doing sumthing similar...so chilllll

x2

GUILOTINE · 08-11-2009, 01:35 PM

nice! very similar setup to my own.

OGGONZALEZ · 08-11-2009, 02:51 PM

Of course it could be advertising. So what?. That simple "bragging" makes ppl like me who are not "that" mechanically inclinded to understand, and see different type of set ups. And if you dont like it kindinthekorner. then dont read it.

k20coupe · 08-11-2009, 07:01 PM

Nice setup I have the same setup just made little more power

08-09-2009, 11:09 AM	#2
Chef Andre HT's TOP CHEF Join Date: Apr 2006 Location: GETTING READY FOR IA!!!!!! Posts: 5,350	Re: 280hp n/a k24 Nice numbers.

08-09-2009, 11:39 AM	#3
joel26 New User Join Date: Aug 2009 Posts: 3	Re: 280hp n/a k24 could this set up work with the k20 complete engine or do u have to swap and do k24 block and k20 head or is there a difference ?

08-09-2009, 11:44 AM	#4
JDM JEFFREY Member Join Date: Dec 2004 Location: KING OF THE COAST, Oregon Posts: 2,041	Re: 280hp n/a k24 sick numbers __________________ (89.5x97h2b)286whp214tq 11:54@115 fastest allmotor street car in OR POWERED BY PARRIS RACE ENGINES Tuned By Garage 808... project 300+ coming soon

08-09-2009, 02:48 PM	#6
K20egcw Junior Member 1993 Honda Civic My Garage Join Date: Jul 2009 Location: Colorado Springs, Colorado Posts: 438	Re: 280hp n/a k24 Nice numbers!! Keep up the nice work __________________ 93 Civic Hatch with Nitrous'd K20a

08-09-2009, 03:55 PM	#7
pgpbubble Member Join Date: Sep 2007 Location: NJ Posts: 1,628	Re: 280hp n/a k24 I wouldnt really consider a ported head and rbc a simple setup. but good numbers. __________________ HONDA/ASE CERTIFIED TECH 92 PGP EG8. Stock longblock 12.40@111 1.8 60' http://rstech-racing.com/default.aspx

08-09-2009, 04:01 PM	#8
ALLxMOTOR EG Vietnamese! Join Date: Oct 2008 Location: Westminster Posts: 9,946	Re: 280hp n/a k24 Nice numbers indeed.

08-09-2009, 07:32 PM	#9
B16Civic93 Member Join Date: Apr 2004 Location: MD Posts: 2,427	Re: 280hp n/a k24 whats an rbc? __________________ $45 TOWING Flat Rate Baltimore/Harford County. Fully Insured. You pay ALL tolls. $45 upto 5 miles, $60 upto 15 miles. $1.50 per additional mile. D&F Towing, LLC 410 967-0948

08-09-2009, 08:31 PM	#10
n/ahonda97 Junior Member Join Date: Apr 2009 Location: subs of philly Posts: 108	Re: 280hp n/a k24 that is a lite in the dark tunnel i am walking in,(k24/k20)

08-11-2009, 01:35 PM	#23
GUILOTINE Kill Gil Join Date: May 2003 Location: San Diego, CA Posts: 12,765	Re: 280hp n/a k24 nice! very similar setup to my own. __________________ PM me for Circuit///Hero parts Thanks To: Rcrew Racing/Chasebays/ICB Motorsport/N1 Concepts/JHPUSA/Blueprint Racing ITR 01-1053 Build Thead

08-11-2009, 02:51 PM	#24
OGGONZALEZ Member Join Date: Dec 2008 Location: W. Sacramento Posts: 1,347	Re: 280hp n/a k24 Of course it could be advertising. So what?. That simple "bragging" makes ppl like me who are not "that" mechanically inclinded to understand, and see different type of set ups. And if you dont like it kindinthekorner. then dont read it.

08-11-2009, 07:01 PM	#25
k20coupe Member Join Date: Jan 2008 Location: anaheim, ca, usa Posts: 1,866	Re: 280hp n/a k24 Nice setup I have the same setup just made little more power __________________ 1995 civic coupe k24/k20 306hp 220tq all motor

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search