Honda and Acura Model Specific Forums

jsvteck · 08-07-2009, 08:48 PM

mounts basicaly are finish just need to weld them better

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

HitF8 · 08-12-2009, 02:44 PM

Neat stuff dude

jsvteck · 09-17-2009, 10:43 PM

sorry i skip a few steps sorry

jsvteck · 09-19-2009, 10:07 AM

oh yea n i changed the rear n front mount so ill take pics of those later

Sunflower Seeds · 09-19-2009, 03:11 PM

Good work.

Supahr_Ed · 09-22-2009, 05:40 PM

Super cool.

In your first pics of the paint, I see the crossmember bars sticking out. Did you use the same ones or got a new crossmember to fit with the engine? Those things look like a pain to do a swap with. How about the axles?

jsvteck · 09-22-2009, 11:03 PM

well those things that r sticking out r not cross member bars but they do connect to the cross member i dont remember what there called but i dint get new ones or remove them i did customize the front cross member tho and yes it was a pain to work with that in there cause i was tryin to fit my headers in there to lol. for the axles my cousin just measured the distance of the tranny to hub full extended out and with the springs fully compressed then he cut the axles and weldd it with a mig.

oh if u want pics of the cross member just let me no ill post them

jsvteck · 09-22-2009, 11:14 PM

here is a link to a vid of my car starting up

TorganFM. · 09-23-2009, 08:28 PM

I can't wait for the panty ripper vids. This is a very cool project with good documentation. Good job so far!

EGR95 · 09-23-2009, 11:33 PM

bump nice...

2ndGenGuy · 09-24-2009, 12:52 AM

Pics of your modified front crossmember, Please? :D

jsvteck · 09-24-2009, 07:04 AM

here r some pics ill post more later

DOHCIVIC · 09-24-2009, 02:59 PM

How did you know where topostion the motor... Info on the fuel pump...

jsvteck · 09-24-2009, 06:17 PM

well i used the stablizer bar to center the motor n tryed to tilt the motor in a god possition that will give a good amount of clearance n for the fuel pump i used an 89 integra fuel pump u can see the fuel lines sticking out on one of the cross member pics i used 5/16 lines if u want some pics on how the fuel pump is routed n stuff let me no

sir4doorking · 09-24-2009, 07:48 PM

bump this is very cool.

Supahr_Ed · 09-25-2009, 02:13 PM

The information is very well appreciated. Hope I get to see this car one day when its finish, but its going to have to be in the Bay as the Valley is way too hot right now!

katch24 · 09-25-2009, 04:57 PM

Nice.....the car is looking good !

I am working on one myself here is the link if you care to look.
http://www.k20a.org/forum/showthread.php?t=46574

jsvteck · 09-25-2009, 06:27 PM

well my cars exterior is in the best condition but ill be out at the meets so maybe ill see u around

bob78cvcc · 09-26-2009, 06:17 PM

Very nice work - cool project

78CITYTURBO · 09-26-2009, 09:48 PM

Damn, you work fast...awesome.

Katch24, I was just trying to find your project link couple of days back.....any update?

katch24 · 09-27-2009, 05:35 PM

Quote:

Originally Posted by 78CITYTURBO

Katch24, I was just trying to find your project link couple of days back.....any update?

Its been slow but still working on it ....I picked up another car and it got pushed ahead of the 79. I will be back on it real soon.

jsvteck · 09-27-2009, 10:07 PM

haha not really i dint finish as fast as i wanted to lol

well thax for all the feedback guys really appreciate it. even tho the swap is basically done i still got lots of thing that i would like to do so stay tooned haha

BlackEm1Si · 10-01-2009, 12:12 PM

Bump for updates. Coming along very nicely.

crxboy909 · 10-02-2009, 03:46 AM

cool project! its comming along really nicely... keep us updated...

jsvteck · 10-14-2009, 10:03 AM

well i took my car out to a meet this weekend and it caught more attention then i thought it would

well if u wanna see some pics of my car at the meet theres some pics of it under the northern cal meets oakdale meets

08-12-2009, 02:44 PM	#27
HitF8 Junior Member Join Date: Jul 2008 Location: on a Island in, md, United States Posts: 281	Re: 1979 civic project Neat stuff dude __________________ -Vehicles- 1992 hatch

09-17-2009, 10:43 PM	#28
jsvteck Junior Member 1979 Honda Civic Join Date: Jul 2009 Location: Modesto, Ca Posts: 52	Re: 1979 civic project sorry i skip a few steps sorry __________________ 79 5dr civic 89 5dr integra R.I.P Honda changing the world one car at a time.

09-19-2009, 10:07 AM	#29
jsvteck Junior Member 1979 Honda Civic Join Date: Jul 2009 Location: Modesto, Ca Posts: 52	Re: 1979 civic project oh yea n i changed the rear n front mount so ill take pics of those later __________________ 79 5dr civic 89 5dr integra R.I.P Honda changing the world one car at a time.

09-19-2009, 03:11 PM	#30
Sunflower Seeds New User Join Date: Nov 2008 Posts: 5	Re: 1979 civic project Good work.

09-22-2009, 05:40 PM	#31
Supahr_Ed Junior Member Join Date: Aug 2004 Location: CaliFoenEyeAy Posts: 982	Re: 1979 civic project Super cool. In your first pics of the paint, I see the crossmember bars sticking out. Did you use the same ones or got a new crossmember to fit with the engine? Those things look like a pain to do a swap with. How about the axles? __________________ -Ed TRUST Muffler & Wiper Arm switches http://hondamarketplace.com/showthread.php?t=2677950 http://hondamarketplace.com/showthread.php?t=2677955

09-22-2009, 11:03 PM	#32
jsvteck Junior Member 1979 Honda Civic Join Date: Jul 2009 Location: Modesto, Ca Posts: 52	Re: 1979 civic project well those things that r sticking out r not cross member bars but they do connect to the cross member i dont remember what there called but i dint get new ones or remove them i did customize the front cross member tho and yes it was a pain to work with that in there cause i was tryin to fit my headers in there to lol. for the axles my cousin just measured the distance of the tranny to hub full extended out and with the springs fully compressed then he cut the axles and weldd it with a mig. oh if u want pics of the cross member just let me no ill post them __________________ 79 5dr civic 89 5dr integra R.I.P Honda changing the world one car at a time.

09-22-2009, 11:14 PM	#33
jsvteck Junior Member 1979 Honda Civic Join Date: Jul 2009 Location: Modesto, Ca Posts: 52	Re: 1979 civic project here is a link to a vid of my car starting up __________________ 79 5dr civic 89 5dr integra R.I.P Honda changing the world one car at a time.

09-23-2009, 08:28 PM	#34
TorganFM. Member Join Date: Dec 2003 Location: Winchester, VA, USA Posts: 1,180	Re: 1979 civic project I can't wait for the panty ripper vids. This is a very cool project with good documentation. Good job so far!

09-23-2009, 11:33 PM	#35
EGR95 Junior Member Join Date: Jan 2009 Location: COACHELLA,CA Posts: 843	Re: 1979 civic project bump nice...

09-24-2009, 12:52 AM	#36
2ndGenGuy Junior Member Join Date: Jun 2006 Location: Olympia, WA, USA Posts: 334	Re: 1979 civic project Pics of your modified front crossmember, Please? :D __________________ \| 1984 Accord LX \| 1981 Accord Hatchback \|

09-24-2009, 07:04 AM	#37
jsvteck Junior Member 1979 Honda Civic Join Date: Jul 2009 Location: Modesto, Ca Posts: 52	Re: 1979 civic project here r some pics ill post more later __________________ 79 5dr civic 89 5dr integra R.I.P Honda changing the world one car at a time.

09-24-2009, 02:59 PM	#38
DOHCIVIC Junior Member Join Date: Jun 2003 Location: Wake Forest, NC, USA Posts: 144	Re: 1979 civic project How did you know where topostion the motor... Info on the fuel pump... __________________ Friend don't let Friends eat Friends I hope this to be my next car http://img.photobucket.com/albums/v5...pemannismo.jpg

09-24-2009, 06:17 PM	#39
jsvteck Junior Member 1979 Honda Civic Join Date: Jul 2009 Location: Modesto, Ca Posts: 52	Re: 1979 civic project well i used the stablizer bar to center the motor n tryed to tilt the motor in a god possition that will give a good amount of clearance n for the fuel pump i used an 89 integra fuel pump u can see the fuel lines sticking out on one of the cross member pics i used 5/16 lines if u want some pics on how the fuel pump is routed n stuff let me no __________________ 79 5dr civic 89 5dr integra R.I.P Honda changing the world one car at a time.

09-24-2009, 07:48 PM	#40
sir4doorking Junior Member Join Date: Sep 2007 Location: groton, ct, united States Posts: 318	Re: 1979 civic project bump this is very cool.

09-25-2009, 02:13 PM	#41
Supahr_Ed Junior Member Join Date: Aug 2004 Location: CaliFoenEyeAy Posts: 982	Re: 1979 civic project The information is very well appreciated. Hope I get to see this car one day when its finish, but its going to have to be in the Bay as the Valley is way too hot right now! __________________ -Ed TRUST Muffler & Wiper Arm switches http://hondamarketplace.com/showthread.php?t=2677950 http://hondamarketplace.com/showthread.php?t=2677955

09-25-2009, 04:57 PM	#42
katch24 Junior Member Join Date: May 2007 Location: titusville, fl Posts: 76	Re: 1979 civic project Nice.....the car is looking good ! I am working on one myself here is the link if you care to look. http://www.k20a.org/forum/showthread.php?t=46574 __________________ RYR Wankclothing.com 79 civic k20 http://www.k20a.org/forum/showthread.php?t=46574

09-25-2009, 06:27 PM	#43
jsvteck Junior Member 1979 Honda Civic Join Date: Jul 2009 Location: Modesto, Ca Posts: 52	Re: 1979 civic project well my cars exterior is in the best condition but ill be out at the meets so maybe ill see u around __________________ 79 5dr civic 89 5dr integra R.I.P Honda changing the world one car at a time.

09-26-2009, 06:17 PM	#44
bob78cvcc Junior Member Join Date: Aug 2008 Posts: 14	Re: 1979 civic project Very nice work - cool project

09-26-2009, 09:48 PM	#45
78CITYTURBO Junior Member Join Date: Jul 2007 Location: Tucker, GA, USA Posts: 168	Re: 1979 civic project Damn, you work fast...awesome. Katch24, I was just trying to find your project link couple of days back.....any update?

09-27-2009, 10:07 PM	#47
jsvteck Junior Member 1979 Honda Civic Join Date: Jul 2009 Location: Modesto, Ca Posts: 52	Re: 1979 civic project haha not really i dint finish as fast as i wanted to lol well thax for all the feedback guys really appreciate it. even tho the swap is basically done i still got lots of thing that i would like to do so stay tooned haha __________________ 79 5dr civic 89 5dr integra R.I.P Honda changing the world one car at a time.

10-01-2009, 12:12 PM	#48
BlackEm1Si Join Date: Oct 2009 Location: Nw Ohio Posts: 6	Re: 1979 civic project Bump for updates. Coming along very nicely.

10-02-2009, 03:46 AM	#49
crxboy909 Junior Member Join Date: Jan 2008 Location: San Bernardino, CA, USA Posts: 217	Re: 1979 civic project cool project! its comming along really nicely... keep us updated... __________________ Pull the E-Brake, Put it in Neutral, Rev that Shit to 6K, Slam that Bitch in 1st and Let it Rip!

10-14-2009, 10:03 AM	#50
jsvteck Junior Member 1979 Honda Civic Join Date: Jul 2009 Location: Modesto, Ca Posts: 52	Re: 1979 civic project well i took my car out to a meet this weekend and it caught more attention then i thought it would well if u wanna see some pics of my car at the meet theres some pics of it under the northern cal meets oakdale meets __________________ 79 5dr civic 89 5dr integra R.I.P Honda changing the world one car at a time.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search