Honda and Acura Model Specific Forums

andre@raw · 07-16-2009, 09:07 PM

My personal toy, it has been sitting for 6 months now and finally have time to do some work on it, enjoy

This pictures were taking right after I got it back from the body shop and a couple days before I took the motor out to make room for the new power plant (F20c) with a Celica Supra rear end.

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

Black R · 07-16-2009, 09:18 PM

wow, me likey!

does the oil pan have any clearance issues there? it looks very close!

you make me so tempted to buy this sr20det swapped hachi coupe locally that just went up fs.....

omiehomie · 07-17-2009, 12:18 AM

dear god :-O

V8 Eater · 07-17-2009, 12:26 AM

fcuk its guys like you that make me hate my life you bastard and Iam stuck with a piece of crap 1.25lt diesel fiat punto that weighs 2500lbs and has 75hp while this guy gets to build an insane 2ton +240hp rwd monster drifter.

love it! gl with it bud!

ae86f20c · 07-17-2009, 02:20 AM

Love red coupes, Im currently in the middle of this swap to.. very clean lookin motor and box. wat year s2000 she out of. Do you think you'l have big job wiring? My friend is stripping my loom for me.

andre@raw · 07-17-2009, 07:26 AM

Quote:

Originally Posted by ae86f20c

Love red coupes, Im currently in the middle of this swap to.. very clean lookin motor and box. wat year s2000 she out of. Do you think you'l have big job wiring? My friend is stripping my loom for me.

It's an '03 motor (AP1 9.500rpm red line),the wiring it's not bad at all.
g/l with your build

ExVtec · 07-17-2009, 08:24 AM

Quote:

Originally Posted by andre@raw

It's an '03 motor (AP1 9.500rpm red line),the wiring it's not bad at all.
g/l with your build

00-03 Ap1's had a 9k redline F20c 2.0L

04-09 Ap2's had the 8200 redline F22c 2.2L

andre@raw · 07-17-2009, 11:54 AM

Quote:

Originally Posted by ExVtec

00-03 Ap1's had a 9k redline F20c 2.0L

04-09 Ap2's had the 8200 redline F22c 2.2L

9.500rpm with the help of some Ferrea retainers,dual springs and locators

S2000Forsale · 07-17-2009, 12:09 PM

greattt build, i was able to see the car in person. Oye Andres, i'm going to stop by the shop tomorrow

andre@raw · 07-18-2009, 06:38 PM

here's some suspension shots and also the Celica/supra rear end.

And the wheels that I might use 14x6.5 and 14x6 Work's

ej1love · 07-18-2009, 06:50 PM

rims are ill

kramerbuccs24 · 10-16-2009, 03:56 PM

any updates on this?

90Rexx · 10-16-2009, 04:48 PM

hey please PM me if your looking to sell those works... ive been looking for a set of those forever :-P

HondaKyle · 10-17-2009, 05:06 AM

This is going to be sweeeeet

amartinez · 10-17-2009, 08:54 AM

really nice ride

SirStig · 10-17-2009, 09:27 AM

Haha that's my project! just don't have a hachi.. Looks great man! not a fan of the wheels tho.

andre@raw · 10-17-2009, 08:12 PM

Thanx, the car it's alsmost done. It is running and driving "a blast to drive"

night · 10-17-2009, 08:57 PM

Quote:

Originally Posted by andre@raw

It is running and driving "a blast to drive"

biggest understatement of at least this entire day.

Ahweeuhl · 10-18-2009, 08:58 PM

Quote:

Originally Posted by omiehomie

dear god :-O

x2!

andre@raw · 10-20-2009, 11:12 PM

It's almost done, I have been driving it around but still need to get the a/c lines done (yes it will have a/c), install the cage and redo the seats.
This thing it's a blast to drive and hopefully will have ready for the v-tec day at PBIR.

kramerbuccs24 · 10-21-2009, 08:31 AM

looks fantastic!!! please keep us posted, i'm considering a similar project.

4doorH22 · 10-21-2009, 12:38 PM

Is this an F22? What's it doing there?

BigWallyz · 10-21-2009, 12:38 PM

good looking build

kramerbuccs24 · 10-21-2009, 02:04 PM

Oh, also, how are you routing the exhaust because it is on the opposite side of the car as a 4A motor?

andre@raw · 10-22-2009, 10:38 PM

Quote:

Originally Posted by 4doorH22

Is this an F22? What's it doing there?

I got mixed up with the pictures I had and posted one from an F22 instead.

07-16-2009, 09:18 PM	#2
Black R Senior Member Join Date: Apr 2000 Location: City of Atlantis, Praying like a Mantis, USDM Posts: 10,611	Re: AE86 F20C build wow, me likey! does the oil pan have any clearance issues there? it looks very close! you make me so tempted to buy this sr20det swapped hachi coupe locally that just went up fs..... __________________ "Please excuse me if it looked like I wasn't paying attention or that my comments had degenerated into any kind of personal attack." -George Knighton TODA ITB's For Sale: http://www.hondamarketplace.com/zerothread/2028084 [b]wtb: bad/ used/ old o2 sensors: http://hondamarketplace.com/zerothread?id=1595712 V = r² * Pi * Stroke * 4

07-17-2009, 12:18 AM	#3
omiehomie Member Join Date: Oct 2004 Location: NYOB, where is mah gun, USA Posts: 1,139	Re: AE86 F20C build dear god :-O __________________ "*experience is that marvelous thing that enables you to recognize a mistake when you make it again" 00 ITR #567 (theft recovery) UP AND RUNNING STRONG.* http://images.honda-tech.com/set1/smile/emsmilep.gif 99 SSBP GSR (DD waiting for boOost) http://images.honda-tech.com/set1/smile/emsmileo.gif

07-17-2009, 12:26 AM	#4
V8 Eater Junior Member Join Date: Dec 2008 Posts: 564	Re: AE86 F20C build fcuk its guys like you that make me hate my life you bastard and Iam stuck with a piece of crap 1.25lt diesel fiat punto that weighs 2500lbs and has 75hp while this guy gets to build an insane 2ton +240hp rwd monster drifter. love it! gl with it bud!

07-17-2009, 02:20 AM	#5
ae86f20c Join Date: Jun 2009 Posts: 6	Re: AE86 F20C build Love red coupes, Im currently in the middle of this swap to.. very clean lookin motor and box. wat year s2000 she out of. Do you think you'l have big job wiring? My friend is stripping my loom for me.

07-17-2009, 12:09 PM	#9
S2000Forsale Junior Member Join Date: Aug 2005 Location: Colorado springs, CO, usa Posts: 322	Re: AE86 F20C build greattt build, i was able to see the car in person. Oye Andres, i'm going to stop by the shop tomorrow

07-18-2009, 06:38 PM	#10
andre@raw Junior Member Join Date: Oct 2008 Location: ft lauderdale, fl, usa Posts: 102	Re: AE86 F20C build here's some suspension shots and also the Celica/supra rear end. And the wheels that I might use 14x6.5 and 14x6 Work's

07-18-2009, 06:50 PM	#11
ej1love Member Join Date: Jan 2008 Location: N.O.L.A. Posts: 2,363	Re: AE86 F20C build rims are ill __________________ It aint JDM if its fake.

10-16-2009, 03:56 PM	#12
kramerbuccs24 New User Join Date: Jun 2009 Posts: 3	Re: AE86 F20C build any updates on this?

10-16-2009, 04:48 PM	#13
90Rexx Member Join Date: Oct 2006 Location: somerset, ma, usa Posts: 1,464	Re: AE86 F20C build hey please PM me if your looking to sell those works... ive been looking for a set of those forever :-P __________________ 2005 World Rally Blue STI - SOLD 1990 Honda CRX Si Shell for sale CLEAN! PM ME! open to offers and trades! WTB CTR front strut bar and SUPER MINT CTR/ITR valve cover

10-17-2009, 08:54 AM	#15
amartinez New User Join Date: Oct 2009 Location: Roanoke VA Posts: 1	Re: AE86 F20C build really nice ride

10-17-2009, 09:27 AM	#16
SirStig Junior Member Join Date: Sep 2009 Posts: 107	Re: AE86 F20C build Haha that's my project! just don't have a hachi.. Looks great man! not a fan of the wheels tho.

10-17-2009, 08:12 PM	#17
andre@raw Junior Member Join Date: Oct 2008 Location: ft lauderdale, fl, usa Posts: 102	Re: AE86 F20C build Thanx, the car it's alsmost done. It is running and driving "a blast to drive" __________________ Andres@RawRacing/Kabautos

10-20-2009, 11:12 PM	#20
andre@raw Junior Member Join Date: Oct 2008 Location: ft lauderdale, fl, usa Posts: 102	Re: AE86 F20C build It's almost done, I have been driving it around but still need to get the a/c lines done (yes it will have a/c), install the cage and redo the seats. This thing it's a blast to drive and hopefully will have ready for the v-tec day at PBIR. __________________ Andres@RawRacing/Kabautos

10-21-2009, 08:31 AM	#21
kramerbuccs24 New User Join Date: Jun 2009 Posts: 3	Re: AE86 F20C build looks fantastic!!! please keep us posted, i'm considering a similar project.

10-21-2009, 12:38 PM	#22
4doorH22 Member Join Date: Jul 2001 Location: Kensington, MD, USA Posts: 5,003	Re: AE86 F20C build Is this an F22? What's it doing there? __________________ '92 Accord EX sedan ('00 OBD1 H22A4) sleeper '08 S2000 new formula red

10-21-2009, 12:38 PM	#23
BigWallyz Join Date: Sep 2008 Location: LVRacingScene Posts: 8	Re: AE86 F20C build good looking build __________________ LV Racing Scene Honda-Tech's Military thread

10-21-2009, 02:04 PM	#24
kramerbuccs24 New User Join Date: Jun 2009 Posts: 3	Re: AE86 F20C build Oh, also, how are you routing the exhaust because it is on the opposite side of the car as a 4A motor?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search