Pics of Replica header beside Skunk2 header
04-16-2009, 04:09 PM
#1
Honda-Tech Member
Thread Starter
Pics of Replica header beside Skunk2 header
Some people would like to see the physical difference of between these two headers so i took a few pics of them side by side.
Last edited by Teamdiesel; 04-16-2009 at 04:38 PM.
04-16-2009, 04:19 PM
#4
Honda-Tech Member
Thread Starter
Re: Pics of Hytech beside Skunk2 header
Actually the skunk2 is shorter and pairs differently than the Hytech replica. The skunk2 unit is also made of far superior quality tubing and welds. The flange on the collector is also rotational and not fixed like most headers, so it can mate up to any exhaust flawlessly.
04-16-2009, 04:24 PM
#5
Honda-Tech Member
Join Date: Dec 2006
Location: Holiday, FL
Posts: 1,456
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of Hytech beside Skunk2 header
I was mainly referring to the pairing between the primary's to there collectors.
The SK2 pairs cylinders 1 with 2 & 3 with 4 from there primary runners.
The Hytech is 2 with 4 & 3 with 1.
The SK2 pairs cylinders 1 with 2 & 3 with 4 from there primary runners.
The Hytech is 2 with 4 & 3 with 1.
04-16-2009, 04:36 PM
#7
Honda-Tech Member
Join Date: May 2008
Location: Sykesville, MD, USA
Posts: 3,032
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of Hytech beside Skunk2 header
it also appears to me that the skunk has longer merge areas from the secondaries to the collector pipe. props to skunk on a very nice piece
Trending Topics
04-16-2009, 05:49 PM
#11
Honda-Tech Member
Join Date: Jul 2006
Location: where cars dont get stolen, NY
Posts: 4,370
Likes: 0
Received 8 Likes
on
6 Posts
Re: Pics of Hytech beside Skunk2 header
i would seem to think they must have done some research into an original idea of different cylinder pairings, since personally thats the first header ive seen pair those.
04-16-2009, 06:23 PM
#15
Honda-Tech Member
Thread Starter
Re: Pics of Hytech beside Skunk2 header
Nope. I sold the Hytech after I took those pics. The car has still not been dynoed on the Skunk2 header yet.
04-16-2009, 07:25 PM
#16
Honda-Tech Member
Join Date: May 2008
Location: Sykesville, MD, USA
Posts: 3,032
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of Hytech beside Skunk2 header
the skunk is gonna make more than the hytech. the replica made way less power than the skunk un donf's test and im gonna quote transzex aka MistaBone here on this
Originally Posted by transzex
I'm about to open a BIG can of worms, I will NOT reveal my source though.
The HyTech replicas are the SAME headers John choose a Asian company to build, only he didn't buy the whole shipment. The leftovers were dumped on the market. Guess what the headers did work and asain old company was contacted to make more while John denies.
The HyTech replicas are the SAME headers John choose a Asian company to build, only he didn't buy the whole shipment. The leftovers were dumped on the market. Guess what the headers did work and asain old company was contacted to make more while John denies.
04-16-2009, 07:34 PM
#18
Honda-Tech Member
Thread Starter
04-16-2009, 08:11 PM
#22
Honda-Tech Member
Thread Starter
Re: Pics of Hytech beside Skunk2 header
Well I wouldn't say a complaint on the header. My car is low on some H&R Race springs which caused the header to scrap in some areas on bad roads. But trust me, it took a good beating and still retained good shape on the tube. My Hytech was almost closed shut from scraping.
04-16-2009, 08:51 PM
#25
Honda-Tech Member
Join Date: May 2008
Location: Sykesville, MD, USA
Posts: 3,032
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of Hytech beside Skunk2 header
Well I wouldn't say a complaint on the header. My car is low on some H&R Race springs which caused the header to scrap in some areas on bad roads. But trust me, it took a good beating and still retained good shape on the tube. My Hytech was almost closed shut from scraping.