Honda and Acura Technical Forums

1SlowSi · 08-17-2008, 08:32 AM

I FINALLY TOOK HER TO THE DYNO! I street tuned her about 4 months ago and just never made it to the dyno to see where i was sitting at for power, but tonight i finally took her. This was done on a Mustang Dyno. I tuned it VERY conservative running 17 deg of timing at 16psi.

465 whp / 275 tq @15-16 psi she was boost creepin hard!

Hey guys whats up. Well I've decided to do another build on my 6th Si. This Si is here to stay i promise! Back in 2005 some of you may remember my MR Em1 that was fully built, well this one is going to surpass that one hopefully! Unlike last time, I will share the entire process of this one. So here we go with the setup.

B18B Stock Sleeve Block CNC machined 81.5mm
9:1 CP
Eagles w/ARP
GSR head with Supertech goodies
GSR cams
AFI Top mount kit T3/T67 H.O.
S300
Kteller 3" exhaust
Skunk 2 70mm throttle body
Edelbrock Victor X 70mm

That about sums up the major parts. Now for the pics so far.

Modified by 1SlowSi at 1:46 AM 9/8/2008

Modified by 1SlowSi at 2:58 AM 9/15/2008

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

WHTZ · 08-17-2008, 05:28 PM

Lookin fresh! Good luck

Civicman86 · 08-17-2008, 06:42 PM

Looks great!

LurkerS8 · 08-17-2008, 07:21 PM

Looking good, I want to build a EM1 after I finish college.

jw330r · 08-17-2008, 09:53 PM

looks good definitely keep us posted sir

Crazee D · 08-18-2008, 08:53 PM

nice shiny new parts

HybridcivicLS-T · 08-18-2008, 09:05 PM

whats your power gaols?

1SlowSi · 08-19-2008, 06:28 AM

I plan to hit somewhere in the ballpark of 550whp. To be honest, if i break 500 im happy. She'll be going up to Evans sometime in Sept.

Next and final step before I actually assemble it is the head. Droppin that off tomorrow for the build and should have it back in about 2-3 days. cant wait!!!

a1320addict · 08-19-2008, 02:48 PM

Looking good Anthony! Glad everything worked out

b18 hatch mike · 08-19-2008, 10:05 PM

looks great good job so far

Mr. Em1 · 08-19-2008, 10:13 PM

turbo em1's FTW guy ill have mine ready soon

blaze the chemi · 08-20-2008, 06:17 AM

I'm in for updates. I hope to be back in boost in a year or so. It was fun. Good luck with everything and keep us updated.

Are those ACL crank bearings or did you just make sure the clearances were good and got the correct bearings from Honda? Building a motor out of the engine bay would be so much easier than in-the-bay build. I wish I could have done that.

1SlowSi · 08-23-2008, 02:07 PM

I will post up some pics of the head i just got back today from the shop. It looks pretty sick! Right now im on vacation so im kinda at a stand still. This week i will be posting up lots of new stuff. The motor is coming out on wednesday, finish up the build on the new motor, and hopefully in on Thursday. Im kind of overwhelmed with all the stuff i still have to do. I havent even touched the car on other stuff that needs to be done. ugh. Thanks for all the comments.

1SlowSi · 08-23-2008, 02:08 PM

Quote:

Originally Posted by blaze the chemi

I'm in for updates. I hope to be back in boost in a year or so. It was fun. Good luck with everything and keep us updated.

Are those ACL crank bearings or did you just make sure the clearances were good and got the correct bearings from Honda? Building a motor out of the engine bay would be so much easier than in-the-bay build. I wish I could have done that.

Those are ACL's im using so im just checking to make sure all the clearances are good. So far so good. thank god.

LastGenEK · 08-23-2008, 03:09 PM

Quote:

Originally Posted by jw330r

looks good definitely keep us posted sir

Hahah good one

1SlowSi · 08-29-2008, 08:11 PM

Im in the middle of a clearance issue with rods so there's a delay.

SD_Lurker · 08-29-2008, 09:15 PM

BEAUTIFUL BRO.. I am afraid to say this BUT if it isn't Full-Race then its half fast.

I kid I kid.

G0TB00ST · 09-02-2008, 05:49 PM

subscribed.

civicsi940 · 09-02-2008, 08:42 PM

ditto. cant wait to see her finished

1SlowSi · 09-03-2008, 10:14 AM

Well the wait has ceased. Just got a set of Clevite 77 HX's in so hopefully this will be it as far as bearings go. Once this is in tonight, i can go ahead and FULLY assemble the motor. Still waiting on motor mounts to come in tho so it definitely isnt going in just yet.

blaze the chemi · 09-03-2008, 12:00 PM

Awesome. What was the clearance issue and why the Clevites? Too much gap?

extralargenog · 09-03-2008, 02:40 PM

WHy not just use OPEM bearings on the rods... Probagbly be alot easier to spec them out no?

Build looks good

tattoo'd · 09-03-2008, 03:17 PM

subscribed.

R.A.T. · 09-03-2008, 05:12 PM

Quote:

Originally Posted by tattoo’d

subscribed.

x2

G0TB00ST · 09-03-2008, 05:32 PM

post pics of the ride homie!

08-17-2008, 05:28 PM	#2
WHTZ Member Join Date: Feb 2004 Location: NY Posts: 1,248	Re: The new EM1 build - TONS of pics! (1SlowSi) Lookin fresh! Good luck

08-17-2008, 06:42 PM	#3
Civicman86 Member Join Date: Apr 2003 Location: Louisville, KY, 40222 Posts: 1,676	Looks great! __________________ -Dustin EJ8 Squad #033 Gt28RS powered D16Y8 (9psi - stock internals) 1/8 mile:8.90 @ 83.94 on street tires eCtune http://images.honda-tech.com/set1/smile/emthup.gif http://images.honda-tech.com/set1/smile/emthup.gif

08-17-2008, 09:53 PM	#5
jw330r Join Date: Mar 2005 Location: East Coast, USA Posts: 127	Re: The new EM1 build - TONS of pics! (1SlowSi) looks good definitely keep us posted sir __________________ My boosted EM1 http://www.honda-tech.com/zerothread/2306510

08-18-2008, 09:05 PM	#7
HybridcivicLS-T CoRn FeEd y'ALL Join Date: Sep 2002 Location: Savin lives at 201 Chicon, 7s Posts: 6,461	whats your power gaols? __________________ stockGSR E85 415/275@18psi...TO BE CONTINUED

08-19-2008, 06:28 AM	#8
1SlowSi Member Join Date: Dec 2003 Location: Virginia Beach, VA Posts: 1,680	Re: (HybridcivicLS-T) I plan to hit somewhere in the ballpark of 550whp. To be honest, if i break 500 im happy. She'll be going up to Evans sometime in Sept. Next and final step before I actually assemble it is the head. Droppin that off tomorrow for the build and should have it back in about 2-3 days. cant wait!!! __________________ The OFFICIAL EM1 WHORE! Em1 T3/T67 H.O 465whp / 275tq @ 16 psi pump gas 2005 DWP IS300

08-17-2008, 07:21 PM	#4
LurkerS8 Junior Member Join Date: Apr 2005 Location: Houston, Tx, U.S.A Posts: 225	Looking good, I want to build a EM1 after I finish college.

08-18-2008, 08:53 PM	#6
Crazee D Join Date: Aug 2008 Location: Orleans, MA, 02653 Posts: 8	nice shiny new parts

08-19-2008, 02:48 PM	#9
a1320addict H-T Basic Sponsor Join Date: Sep 2004 Location: NJ Posts: 9,206	Re: (1SlowSi) Looking good Anthony! Glad everything worked out __________________ Speed Theory .Service.Retail.Wholesale. 1275 Bloomfield Avenue, Bldg 3, Unit 59 Fairfield, NJ 07004 973.227.2119

08-19-2008, 10:05 PM	#10
b18 hatch mike Junior Member Join Date: Feb 2007 Location: wawa, united states Posts: 727	Re: (a1320addict) looks great good job so far __________________ i <3 vtec http://images.honda-tech.com/set1/smile/embeer.gif lots of stuff for sale always updated http://www.hondamarketplace.co...40783 JK-TUNNING http://images.honda-tech.com/set1/smile/emthup.gif http://images.honda-tech.com/set1/smile/emthup.gif http://images.honda-tech.com/set1/smile/emthup.gif

08-19-2008, 10:13 PM	#11
Mr. Em1 Member Join Date: Jan 2005 Location: NEW YORK Posts: 5,405	turbo em1's FTW guy ill have mine ready soon __________________ Team Xenocron F*CK All you Haters. DON'T BUY FROM ROBEAR RACING. THEY WILL ROB YOU!!

08-20-2008, 06:17 AM	#12
blaze the chemi Member Join Date: Oct 2004 Location: All over ATL Posts: 1,722	Re: (Mr. Em1) I'm in for updates. I hope to be back in boost in a year or so. It was fun. Good luck with everything and keep us updated. Are those ACL crank bearings or did you just make sure the clearances were good and got the correct bearings from Honda? Building a motor out of the engine bay would be so much easier than in-the-bay build. I wish I could have done that. __________________ 2000 EBP EM1 I've done business with: Check my profile XBOX Live: BlazeATL

08-23-2008, 02:07 PM	#13
1SlowSi Member Join Date: Dec 2003 Location: Virginia Beach, VA Posts: 1,680	Re: (blaze the chemi) I will post up some pics of the head i just got back today from the shop. It looks pretty sick! Right now im on vacation so im kinda at a stand still. This week i will be posting up lots of new stuff. The motor is coming out on wednesday, finish up the build on the new motor, and hopefully in on Thursday. Im kind of overwhelmed with all the stuff i still have to do. I havent even touched the car on other stuff that needs to be done. ugh. Thanks for all the comments. __________________ The OFFICIAL EM1 WHORE! Em1 T3/T67 H.O 465whp / 275tq @ 16 psi pump gas 2005 DWP IS300

08-29-2008, 08:11 PM	#16
1SlowSi Member Join Date: Dec 2003 Location: Virginia Beach, VA Posts: 1,680	Re: The new EM1 build - TONS of pics! (LastGenEK) Im in the middle of a clearance issue with rods so there's a delay. __________________ The OFFICIAL EM1 WHORE! Em1 T3/T67 H.O 465whp / 275tq @ 16 psi pump gas 2005 DWP IS300

08-29-2008, 09:15 PM	#17
SD_Lurker HT White Ops Join Date: Oct 2005 Location: Ova Thur, United States Posts: 5,712	Re: The new EM1 build - TONS of pics! (1SlowSi) BEAUTIFUL BRO.. I am afraid to say this BUT if it isn't Full-Race then its half fast. I kid I kid. __________________

09-02-2008, 08:42 PM	#19
civicsi940 Junior Member Join Date: Apr 2004 Location: Maryland Posts: 784	ditto. cant wait to see her finished __________________ WTB EK hatch please PM My For Sale Thread

09-03-2008, 10:14 AM	#20
1SlowSi Member Join Date: Dec 2003 Location: Virginia Beach, VA Posts: 1,680	Re: (civicsi940) Well the wait has ceased. Just got a set of Clevite 77 HX's in so hopefully this will be it as far as bearings go. Once this is in tonight, i can go ahead and FULLY assemble the motor. Still waiting on motor mounts to come in tho so it definitely isnt going in just yet. __________________ The OFFICIAL EM1 WHORE! Em1 T3/T67 H.O 465whp / 275tq @ 16 psi pump gas 2005 DWP IS300

09-03-2008, 12:00 PM	#21
blaze the chemi Member Join Date: Oct 2004 Location: All over ATL Posts: 1,722	Re: (1SlowSi) Awesome. What was the clearance issue and why the Clevites? Too much gap? __________________ 2000 EBP EM1 I've done business with: Check my profile XBOX Live: BlazeATL

09-03-2008, 02:40 PM	#22
extralargenog Member Join Date: Mar 2008 Location: Blah Blah Blah, wa, Erf Posts: 1,062	Re: (blaze the chemi) WHy not just use OPEM bearings on the rods... Probagbly be alot easier to spec them out no? Build looks good __________________ LEED tuned 660 WHP 4 do' panty soiler GFI:WE build FAST!!! REALHOMEMADETURBO.COM, KAIZENSPEED.COM, LSD Motorsports

09-03-2008, 03:17 PM	#23
tattoo'd Member Join Date: Jun 2008 Location: Madison, Wi, USA Posts: 47	subscribed. __________________ '99 EM1 - red

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search