Honda and Acura Appearance/Cosmetic Forums

elfather · 07-05-2008, 11:47 AM

well guys here's my project that i have been working on for 15 months now the car its almost complete at this point, just minor stuff are left to do on the car.

my goal is to build the perfect car for me which is a SHOW/STREET/RACE/TRACK CAR. this car its deff NOT a trailer queen just to clear that out.

im planing on building the motor within the next 2 month my goal is nothing crazy looking to get around 260-265 im trying to keep it pump gas.
well without further delay here everything i documented from the moment i began my swap. i hope you enjoy the pics because theres a whole lot of them so be patient wait for them to load lol.

P.S
I HOPE THIS HELPS PEOPLE THAT WILL TAKE ON THIS CHALLENGE IN THE FUTURE.

the shell 96 ek cx

so i realize and decided that i hated the 96 light gray interior and i went ahead and did a whole 2000 dash heater core and blower, interior conversion every single panel i replaced it with the 99-00 dark gray from the center console to the speakers cover well... im still missing the door panels thats the only thing that was damaged on the 2000 ek i got all the panels from.

old light grey

new one

see the difference?

"new" panels

SWAP PARTS
HASPORTS EKK2 MOUNTS

russell prolite fuel hoses

RBC MANIFOLD

ADAPTER

DTR/SSR HEADER FTW!

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

elfather · 07-05-2008, 11:49 AM

KTELLER BOLT ON 3" EXHAUST

COOLANT OVER FLOAT RESERVOIR

CHASSIS BOLTS

[IMG]

[/IMG]

1/8 NPT FITTING FOR THE COOLANT TEMP SENSOR INTO THE COOLANT BYPASS

STAGGERED CPR'S DUNLOP EDITION

NEW TE'S

CTR REAR LIP:bang:

EG SUBFRAME AND RACK

ALL NEW RACK GASKETS

MY LIL SPOON COLLECTION

elfather · 07-05-2008, 11:49 AM

BRAND NEW PAIR OF CTR HEAD LIGHTS FROM HMO

03 K20A DC5 ITR MOTOR SAME DAY I GOTIT SUPER CLEANNN HMO FTW!

RBC INSTALLED

GETTING READY TO REPAINT THE ENGINE BAY

A/C BLOCK OFF GROMMET

FUSE BOX AND THE AND OLD BODY HARNESS PLUGS

SHAVED AND CHROMED OUT RBC:bang:

SICKEST CAI I'VE SEEN

MY CUSTOM BRAKE/CLUTCH LINES:D

elfather · 07-05-2008, 11:51 AM

VALVE COVER BREATHER

NEW BATTERY ODYSSEY FTW!

BF DRAGS

MY SEATS I HAD TO WAIT 3 MONTHS FOR THESE BAD MFS TO ARRIVED FROM JAPAN. BUT THE WAIT WAS DAMN WORTH IT.

nice padding :up::up:

i also have a set of these beauties on the way hopefully they'll get this month.

bride ftmfw:up::up::up:

AEBS radiator hose clamps

ARS BRACE

THIS IS THE DAY ME AND MY MY GAY HOMEBOY (phatlipciv) DROPPED THE MOTOR IN:thumbup:

[IMG][/IMG]

Modified by elfather at 12:05 PM 7/5/2008

elfather · 07-05-2008, 11:52 AM

BATTERY INSTALLED

finally got done wire looping my whole harness

INSTALLING SOME STUFF OVER THE WEEKEND

FINAL TOUCHES TO THE WIRE TUCK

and if anybody cares to know the new DTR/SSR headers design completely clears the karcepts shifter box

elfather · 07-05-2008, 11:53 AM

SO i was having this dilemma, about where i was going to route my engine harness into the car. as most of you guys already know im all about engine bay cleaness. well i finally came to the following conclusion enjoy! lol...

so if you want a nearly out of sight engine harness here's what you have to do....

THIS IS THE LATEST PIC OF THE CAR FULL PICS WILL COME SOON WHEN THE TIME ITS RIGHT

:D I HOPE YOU ENJOY THE PICSAND ILL KEEP YOU GUYS POSTED.

2mansi · 07-05-2008, 12:12 PM

all i can say is wow. You have gone above and beyond. Hope my car comes out this clean when im finish with my build thread.

sixfiveoh · 07-05-2008, 01:13 PM

holy shit.

Locc · 07-05-2008, 01:22 PM

dam good workkk car is cleannn

ELIJAH EG-2 · 07-05-2008, 01:43 PM

HOT DAMN!!!

EF9 JAMS!!! · 07-05-2008, 03:47 PM

HOLY MOLY!!!!!!!!!!!

importi2acer · 07-05-2008, 08:59 PM

lots of good stuff you got there.

elfather · 07-06-2008, 12:05 AM

thanks for the love guys

-JAWSHUA- · 07-06-2008, 01:10 AM

you deserve it man! great work. really!! nice job on the intake manifold too.

rhd94teg · 07-06-2008, 02:11 AM

such a great build

iheartintegras · 07-06-2008, 03:43 AM

Quote:

Originally Posted by rhd94teg

such a great build

BadKid · 07-06-2008, 04:44 AM

i fail at life

eddie5141981 · 07-06-2008, 07:07 AM

im loving your built good work

just one question how are going to swap out your filter elemet????

JReal · 07-06-2008, 12:40 PM

holly molly.

Silvertc · 07-06-2008, 01:51 PM

wow very nice build

swoyEKr. · 07-06-2008, 02:13 PM

Dope!

EtherEG93 · 07-06-2008, 05:48 PM

very nice!

elfather · 07-06-2008, 06:13 PM

thanks for the nice comments guys

Quote:

Originally Posted by eddie5141981

im loving your built good work

just one question how are going to swap out your filter elemet????

thanks man. i know why you say that, from the picture it looks like the subframe its on the way lol, but actually there's like a 3" gap between the filter and the subframe, so all i have to do its unscrew the filter from the fire wall, take it out and change the filter

Red97Ek · 07-06-2008, 10:33 PM

vpr-zero_seven · 07-06-2008, 11:10 PM

07-05-2008, 11:49 AM	#2
elfather Junior Member Join Date: Apr 2006 Posts: 850	Re: elfather's K20A EK build up again lol (elfather) KTELLER BOLT ON 3" EXHAUST COOLANT OVER FLOAT RESERVOIR CHASSIS BOLTS [IMG][/IMG] 1/8 NPT FITTING FOR THE COOLANT TEMP SENSOR INTO THE COOLANT BYPASS STAGGERED CPR'S DUNLOP EDITION NEW TE'S CTR REAR LIP:bang: EG SUBFRAME AND RACK ALL NEW RACK GASKETS MY LIL SPOON COLLECTION __________________ http://www.kamispeed.com/ http://flushstance.ccwheel.com/ -HECTOR -K.O.T.S

07-05-2008, 11:49 AM	#3
elfather Junior Member Join Date: Apr 2006 Posts: 850	Re: elfather's K20A EK build up again lol (elfather) BRAND NEW PAIR OF CTR HEAD LIGHTS FROM HMO 03 K20A DC5 ITR MOTOR SAME DAY I GOTIT SUPER CLEANNN HMO FTW! RBC INSTALLED GETTING READY TO REPAINT THE ENGINE BAY A/C BLOCK OFF GROMMET FUSE BOX AND THE AND OLD BODY HARNESS PLUGS SHAVED AND CHROMED OUT RBC:bang: SICKEST CAI I'VE SEEN MY CUSTOM BRAKE/CLUTCH LINES:D __________________ http://www.kamispeed.com/ http://flushstance.ccwheel.com/ -HECTOR -K.O.T.S

07-05-2008, 11:51 AM	#4
elfather Junior Member Join Date: Apr 2006 Posts: 850	Re: elfather's K20A EK build up again lol (elfather) VALVE COVER BREATHER NEW BATTERY ODYSSEY FTW! BF DRAGS MY SEATS I HAD TO WAIT 3 MONTHS FOR THESE BAD MFS TO ARRIVED FROM JAPAN. BUT THE WAIT WAS DAMN WORTH IT. nice padding :up::up: i also have a set of these beauties on the way hopefully they'll get this month. bride ftmfw:up::up::up: AEBS radiator hose clamps ARS BRACE THIS IS THE DAY ME AND MY MY GAY HOMEBOY (phatlipciv) DROPPED THE MOTOR IN:thumbup: [IMG][/IMG] Modified by elfather at 12:05 PM 7/5/2008 __________________ http://www.kamispeed.com/ http://flushstance.ccwheel.com/ -HECTOR -K.O.T.S

07-05-2008, 11:52 AM	#5
elfather Junior Member Join Date: Apr 2006 Posts: 850	Re: elfather's K20A EK build up again lol (elfather) BATTERY INSTALLED finally got done wire looping my whole harness INSTALLING SOME STUFF OVER THE WEEKEND FINAL TOUCHES TO THE WIRE TUCK and if anybody cares to know the new DTR/SSR headers design completely clears the karcepts shifter box __________________ http://www.kamispeed.com/ http://flushstance.ccwheel.com/ -HECTOR -K.O.T.S

07-05-2008, 11:53 AM	#6
elfather Junior Member Join Date: Apr 2006 Posts: 850	Re: elfather's K20A EK build up again lol (elfather) SO i was having this dilemma, about where i was going to route my engine harness into the car. as most of you guys already know im all about engine bay cleaness. well i finally came to the following conclusion enjoy! lol... so if you want a nearly out of sight engine harness here's what you have to do.... THIS IS THE LATEST PIC OF THE CAR FULL PICS WILL COME SOON WHEN THE TIME ITS RIGHT :D I HOPE YOU ENJOY THE PICSAND ILL KEEP YOU GUYS POSTED. __________________ http://www.kamispeed.com/ http://flushstance.ccwheel.com/ -HECTOR -K.O.T.S

07-05-2008, 12:12 PM	#7
2mansi Junior Member Join Date: Mar 2006 Location: somewhere in this world, u.s.a. Posts: 266	all i can say is wow. You have gone above and beyond. Hope my car comes out this clean when im finish with my build thread. __________________ ALL I WANT IS TO BE FAST!!!!!!!!!!

07-05-2008, 01:13 PM	#8
sixfiveoh Sweet Title Join Date: Feb 2006 Location: Bay Area, CA Posts: 3,976	Re: (2mansi) holy shit. __________________ european whippin' it

07-05-2008, 01:22 PM	#9
Locc Member Join Date: Feb 2005 Location: East Bay, CA, Usa Posts: 2,996	FV-QR dam good workkk car is cleannn __________________ N1Concepts /Garage Works

07-05-2008, 01:43 PM	#10
ELIJAH EG-2 Junior Member Join Date: Sep 2002 Posts: 280	Re: FV-QR (Locc) HOT DAMN!!!

07-05-2008, 03:47 PM	#11
EF9 JAMS!!! Join Date: Jun 2004 Location: san antonio, TX, USA Posts: 1,006	Re: FV-QR (ELIJAH EG-2) HOLY MOLY!!!!!!!!!!! __________________ YEA I KNOW MY CAR IS "F N" SLOW.. and GAY BUT WHO CARES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!! I'M PART OF THE 18 SEC EF CLUB HERE IN SAN ANTONIO...

07-05-2008, 08:59 PM	#12
importi2acer Member Join Date: Jul 2006 Location: so CAL, CA Posts: 1,120	Re: elfather's K20A EK build up again lol (elfather) lots of good stuff you got there. __________________ JDM AUTO BOUTIQUE http://www.shopjab.com

07-06-2008, 12:05 AM	#13
elfather Junior Member Join Date: Apr 2006 Posts: 850	Re: elfather's K20A EK build up again lol (importi2acer) thanks for the love guys __________________ http://www.kamispeed.com/ http://flushstance.ccwheel.com/ -HECTOR -K.O.T.S

07-06-2008, 01:10 AM	#14
-JAWSHUA- Member Join Date: Jul 2007 Location: nor cal, USA Posts: 1,146	you deserve it man! great work. really!! nice job on the intake manifold too. __________________ www.jdmspeedworx.com call them for any parts you need 209 545-3200

07-06-2008, 02:11 AM	#15
rhd94teg Member Join Date: Jun 2007 Location: watching u, watch me Posts: 2,449	such a great build __________________ 2000 PY itr # 1010 2002 rsx / k20a swap 94 jdm xsi integra

07-06-2008, 04:44 AM	#17
BadKid Junior Member Join Date: Mar 2008 Location: Federal Way, WA, United States Posts: 107	i fail at life __________________ ya dig

07-06-2008, 07:07 AM	#18
eddie5141981 Junior Member Join Date: Jan 2008 Posts: 34	Re: elfather's K20A EK build up again lol (elfather) im loving your built good work just one question how are going to swap out your filter elemet???? __________________ yeap its me http://is.rely.net/1-92-29998-l-1gbM...AmVuBW3hGg.gif

07-06-2008, 12:40 PM	#19
JReal Member 1970 Ford Conversion Van Join Date: Feb 2008 Location: Sunshine State Posts: 1,000	holly molly. __________________ Vroom Vroom...

07-06-2008, 01:51 PM	#20
Silvertc Member Join Date: Apr 2007 Location: cincinnati, OH, United States Posts: 1,791	Re: (JReal) wow very nice build __________________ vouches~ patrickdc4130, botlebruiser, jdmscg, RMXmitch, Speed Kills, AllMotaEF9, Brok dck, slammed civic si,gaseb, pornstarcivic, JERKSiRcoupe, manoy, RARE_EG2, 88civic, gene, Teawins21, b16rex_02, Chain Driven, kabaroo, DxHatchback

07-06-2008, 02:13 PM	#21
swoyEKr. Member Join Date: Dec 2004 Location: South East, Pa Posts: 2,086	Dope!

07-06-2008, 05:48 PM	#22
EtherEG93 Junior Member Join Date: Aug 2005 Location: Cincinnati, oh, usa Posts: 254	very nice! __________________ Current Rides- 91 Dx Crx (Build Thread) http://www.honda-tech.com/zerothread/2337585 93 Dx Hatch

07-06-2008, 10:33 PM	#24
Red97Ek Junior Member Join Date: Mar 2007 Location: SOcal, ca Posts: 149	Re: elfather's K20A EK build up again lol (elfather)

07-06-2008, 11:10 PM	#25
vpr-zero_seven Junior Member Join Date: Jul 2008 Location: Honolulu, Hawaii, United States Posts: 21	__________________ ooh key knee nah yo!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search