Honda and Acura Model Specific Forums

xalents23 · 07-26-2008, 12:37 AM

Quote:

Originally Posted by painterbob

props to you . installing mine know thank to you to boldy go were few have gone you been pm

pmed you back.

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

91crix · 08-05-2008, 09:37 PM

hey is this the same write up for the ap1 cluster? can you please aim me at gomeno4u thanks

xalents23 · 08-05-2008, 11:33 PM

Quote:

Originally Posted by 91crix

hey is this the same write up for the ap1 cluster? can you please aim me at gomeno4u thanks

No this write up is for an AP2 S2000 cluster going into a 1990-1991 CRX SI. The AP1 S2000 cluster is a bit different. I can pm you the AP1 info if you need it. Just let me know.

91crix · 08-06-2008, 08:04 AM

yes can you please send me the write up on how 2 do it? and what else i need 2 buy like the speedohealer and modifry exactly what model # thanks

xalents23 · 08-06-2008, 09:44 AM

Quote:

Originally Posted by 91crix

yes can you please send me the write up on how 2 do it? and what else i need 2 buy like the speedohealer and modifry exactly what model # thanks

Read my first post on this thread it should have all the info you need. Except it does not have the AP1 cluster pinouts which I will PM you. You will need to match the wires from the AP1 pinouts to your existing car pinouts.

messeduprex · 08-06-2008, 11:57 AM

great job! i would like to try this on my eg

TurboHatchB16 · 08-13-2008, 11:40 PM

how much did this cost u in the end?

xalents23 · 08-14-2008, 10:58 AM

Quote:

Originally Posted by TurboHatchB16

how much did this cost u in the end?

I added my cost up and I spent $390 on parts alone. Labor charges was free as I did the swap myself. I bit expensive but, I think its worth it.

zccr-xsi · 08-14-2008, 11:08 AM

Quote:

Originally Posted by mexicanstud

heres a pic of one in a ek they made a piece of carbon fiber to go around...I think it looks badass

now thats clean as hell i like the way they did that.

i wonder if that can be done with the dc cluster also?

Sowler · 08-26-2008, 01:40 AM

How accurate are you finding the fuel gauge? Is it just wired straight from the sender to the cluster?

xalents23 · 08-26-2008, 08:40 AM

Quote:

Originally Posted by Sowler

How accurate are you finding the fuel gauge? Is it just wired straight from the sender to the cluster?

My fuel guage is okay. Because it takes the fuel bars a while to disapear on the S2K cluster. All in all it works fine and it has a low level warning light when you are low on gas. Whenever I need gas my fuel bars on the S2K is pretty accurate. Wiring the fuel is straight forward. Just take the wire that sends the fuel signal from your original cluster wire to the S2K's.

Sowler · 08-27-2008, 01:42 AM

Ah ok that sounds good. Can I ask why are you removing it and selling?

Sowler · 08-28-2008, 02:09 AM

Ah ok that sounds good. Can I ask why are you removing it and selling?

jr94513 · 08-28-2008, 10:01 AM

i see there is a pinout for 90-91 crx i havent seen a pinout for an 88

xalents23 · 08-28-2008, 10:58 AM

Quote:

Originally Posted by Sowler

Ah ok that sounds good. Can I ask why are you removing it and selling?

I am planning on going with a different setup for my CRX. That is why I am going to be selling my complete AP2 S2000 setup.

xalents23 · 08-28-2008, 11:01 AM

Quote:

Originally Posted by jr94513

i see there is a pinout for 90-91 crx i havent seen a pinout for an 88

I too have not seen an 88 pinout. But its pretty straight forward. Just get the 88 cluster pinout and your good to go. Must be because not many 88 owners are doing this swap.

slicedbreadno2 · 08-28-2008, 12:53 PM

That's a nice write up. It also looks good on the car.

jr94513 · 08-28-2008, 08:52 PM

yea i know but im talkin bout online i havent seen any pinouts

thapimpfromchi · 09-03-2008, 12:44 PM

oh yes. if I ever get my damn car running, i will most definitely be attempting this. Awesome write up.

xalents23 · 09-03-2008, 03:02 PM

Quote:

Originally Posted by jr94513

i see there is a pinout for 90-91 crx i havent seen a pinout for an 88

Here are the cluster pinouts for the 1988-1989 crx.

thapimpfromchi · 09-04-2008, 10:25 AM

i saw in the list of things needed you said a vss for a 92-95 civic. if and when i ever get my car running, its gonna be a 95 ls motor, with obviously an electronic vss. would that one work or would i need a different one?

xalents23 · 09-04-2008, 10:58 AM

Quote:

Originally Posted by thapimpfromchi

i saw in the list of things needed you said a vss for a 92-95 civic. if and when i ever get my car running, its gonna be a 95 ls motor, with obviously an electronic vss. would that one work or would i need a different one?

If your car came with an electronic VSS then you don't need to get another electronic VSS.

thapimpfromchi · 09-04-2008, 01:47 PM

thats what i figured, just makin sure.

HQC2351 · 09-10-2008, 01:43 AM

hey man, awesome write-up!
would the pinouts for the 90-91 crx si work with 90-91 civic si?
if not, would you happen to have the pinouts? thanks

xalents23 · 09-10-2008, 11:12 AM

Quote:

Originally Posted by HQC2351

hey man, awesome write-up!
would the pinouts for the 90-91 crx si work with 90-91 civic si?
if not, would you happen to have the pinouts? thanks

I don't know for sure if the 90-91 Civic SI and 90-91 CRX SI are the same. I have attached the 90-91 CRX cluster pinouts below. Compare yours and see if your cluster pin out looks like the ones pictured below. But, try to get a confirmation before you wire anything up.

Modified by xalents23 at 3:16 PM 9/10/2008

08-05-2008, 09:37 PM	#52
91crix Junior Member Join Date: Jan 2008 Location: astoria, ny Posts: 23	Re: (xalents23) hey is this the same write up for the ap1 cluster? can you please aim me at gomeno4u thanks

08-06-2008, 08:04 AM	#54
91crix Junior Member Join Date: Jan 2008 Location: astoria, ny Posts: 23	Re: (xalents23) yes can you please send me the write up on how 2 do it? and what else i need 2 buy like the speedohealer and modifry exactly what model # thanks

08-06-2008, 11:57 AM	#56
messeduprex Junior Member Join Date: Apr 2003 Location: wilmington, de Posts: 725	Re: (Smokinsax) great job! i would like to try this on my eg __________________ Feiro Eg Squad Member #32 R.I.P. the REAL H-T 11/17/2008 12:30am

08-13-2008, 11:40 PM	#57
TurboHatchB16 Junior Member Join Date: Jul 2008 Location: Jacksonville, Fl, USA Posts: 118	Re: CRX S2000 AP2 Cluster Write-up & Video (xalents23) how much did this cost u in the end?

08-26-2008, 01:40 AM	#60
Sowler Join Date: Sep 2004 Location: UK Posts: 19	Re: CRX S2000 AP2 Cluster Write-up & Video (xalents23) How accurate are you finding the fuel gauge? Is it just wired straight from the sender to the cluster?

08-27-2008, 01:42 AM	#62
Sowler Join Date: Sep 2004 Location: UK Posts: 19	Re: CRX S2000 AP2 Cluster Write-up & Video (xalents23) Ah ok that sounds good. Can I ask why are you removing it and selling?

08-28-2008, 02:09 AM	#63
Sowler Join Date: Sep 2004 Location: UK Posts: 19	Re: CRX S2000 AP2 Cluster Write-up & Video (xalents23) Ah ok that sounds good. Can I ask why are you removing it and selling?

08-28-2008, 10:01 AM	#64
jr94513 Junior Member Join Date: Mar 2007 Location: bay area, ca, usa Posts: 171	i see there is a pinout for 90-91 crx i havent seen a pinout for an 88

08-28-2008, 12:53 PM	#67
slicedbreadno2 Junior Member Join Date: Apr 2008 Location: Highland, IN Posts: 130	Re: (xalents23) That's a nice write up. It also looks good on the car.

08-28-2008, 08:52 PM	#68
jr94513 Junior Member Join Date: Mar 2007 Location: bay area, ca, usa Posts: 171	yea i know but im talkin bout online i havent seen any pinouts

09-03-2008, 12:44 PM	#69
thapimpfromchi Member 1991 Honda CRX Join Date: Jul 2005 Location: West Chicago, Il, USA Posts: 1,629	Re: (jr94513) oh yes. if I ever get my damn car running, i will most definitely be attempting this. Awesome write up. __________________ crx build thread Stuff for sale

09-04-2008, 10:25 AM	#71
thapimpfromchi Member 1991 Honda CRX Join Date: Jul 2005 Location: West Chicago, Il, USA Posts: 1,629	Re: (xalents23) i saw in the list of things needed you said a vss for a 92-95 civic. if and when i ever get my car running, its gonna be a 95 ls motor, with obviously an electronic vss. would that one work or would i need a different one? __________________ crx build thread Stuff for sale

09-04-2008, 01:47 PM	#73
thapimpfromchi Member 1991 Honda CRX Join Date: Jul 2005 Location: West Chicago, Il, USA Posts: 1,629	Re: (xalents23) thats what i figured, just makin sure. __________________ crx build thread Stuff for sale

09-10-2008, 01:43 AM	#74
HQC2351 Junior Member Join Date: Feb 2007 Location: 831 Ca Posts: 91	Re: (thapimpfromchi) hey man, awesome write-up! would the pinouts for the 90-91 crx si work with 90-91 civic si? if not, would you happen to have the pinouts? thanks __________________ ASTIG / O'NAPS \| Rare Wheels Saved My Life \| MEMORYFAB/HUNG'S DRIVEWAY

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search