Honda and Acura Technical Forums

flatblackhatch · 04-19-2008, 12:14 PM

We currently have a 00 civic si with t3t4 and are best time was a 11.87 @119 on 19lbs with gsr cams cp pistons crower rods tuned with hondata. I'm just curious as to what time some of you other guys are doing with b16s. Also what setups you are running. Where looking to up the turbo kit and the motors already built. Just wanting to know what some of the best times out there are.

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

Adriano · 04-19-2008, 01:17 PM

Steve from CLM Motorsports went 10.2 @ 142. b16, eagle and cp, gt35r.

Adriano

hondacivic946 · 04-19-2008, 01:20 PM

10.8 on a stock b16 bottomend with a 35r on 20psi

Garage 808 Hatch · 04-19-2008, 01:32 PM

old car went 10.4 @137, new car will be faster after some crap is sorted out, and i finally man up and spray on it. so far 10.7, slipping clutch and no top end. 81mm

nsxmatt · 04-19-2008, 01:54 PM

I went 11.7 at 115 with a 92 Civic VX full weight, stock jdm b16, stock clutch, on 22" slicks. Turbonetics 57 trim at 10psi, Neukin manifold. Daily driven car.

sirtef9 · 04-19-2008, 05:01 PM

10.8 on a stock b16 bottomend with a 35r on 20psi

How Stock was the bottom end? Wanna Tune my shit?

boostedcivicsir · 04-19-2008, 05:53 PM

10.72 at 130 84mm b16 crower/je gsr cams.
t3t67ho 29 psi.

ef9civicgen4 · 04-19-2008, 06:09 PM

i went 10.8 @134 with an 81mm b16, t3t4 turbo, 23psi, stock head.

this year is an 82mm b16, 30spi, bw 362et, ported head, itr cams, more rpm. hoping to make close to 600whp. should be good for deep 10s.

extremevtecracing · 04-19-2008, 06:42 PM

I am trying to be the first B16 powered spfwd to go 9's. I have a ways to go. I know it's possible cause Phil Lam went 10.02 on a B16 and that is dam close, fortunately for me he sold his car.

Boosteddb8 · 04-19-2008, 08:16 PM

went 10.15 @ 146mph b16 with 85mm aries pistons, stock b16 crank, eagle rods and eagle sleeves, stock head skunk2 valve train and ctr cams. PT67 turbo full race top mount all in a sfwd Integra 2580lbs

heres the car a nhra finals last seson. The 1st pass broke the turbo shaft, 2nd and 3rd pass low 10's and last pass missed 3rd gear

clarkBAR · 04-20-2008, 08:07 AM

it has already been done

fastforwardracer · 04-20-2008, 08:30 AM

iwas wondering if you were going to chime in. have you redone you r motor yet?i would have posted about you but i didnt know your exact times.

matt k · 04-20-2008, 03:02 PM

Quote:

Originally Posted by clarkBAR

it has already been done

bla bla bla

Semnos · 04-20-2008, 05:05 PM

Yup it has already been done.

http://videos.streetfire.net/v...8.htm

extremevtecracing · 04-20-2008, 06:17 PM

If I recall right the RLZ car has a GSR head on it. Not a B16

Garage 808 Hatch · 04-20-2008, 07:41 PM

we'll see what happens, weather permitting, i'll be at the track saturday on low boost. see if the clutch will hold and quit overboosting

TurboB16A300Hpteg · 04-20-2008, 07:55 PM

any guess on how fast my car willgo its a 90 integra gs no power windows locks took out PS and AC has a b16 81.5mm srp 8.5.1 pistons,eagle h beam rods,darton MID sleeves.ARp head studs,supertech dual valve springs and retainers,Pro products 68mm Tb and whirlwind intake manifold port matched to the 68 mill TB,aem fuel rail,1000CC injectors, full race ram horn,3 inch Dp,turbonetics racegate,Garret t3/t67 Dual BB P trim with 63 a/r, on hondata S300.. tranny is a 00 type r with a 4.4 final drive with gator racing axles and a clutch masters FX5oo cars on a 24.5 inch slick gunna run 20 Psi my whp should be in the 400s sumwhere and its on 93 octane gass what E/t u think this car may cutt any ideas of estimates would be Great Thanks

extremevtecracing · 04-20-2008, 09:32 PM

Didn't really need the run down, a simple note of how much power you make can give you a real close idea.

stanzione88 · 04-21-2008, 11:04 AM

just curious, how high are you guys revving this little monsters?

built b16a turbo in the works

flatblackhatch · 04-21-2008, 11:22 AM

thanks for all the imput so far where thinking of a borg warner 259 anyone heard good or bad about this turbo where shooting to hit 10s. Its going to be built by king motorsports out of wisconsin. if you know anything bout this turbo let me know.

Garage 808 Hatch · 04-21-2008, 04:51 PM

Quote:

Originally Posted by stanzione88

just curious, how high are you guys revving this little monsters?

built b16a turbo in the works

10,000 all day long

flatblackhatch · 04-21-2008, 05:28 PM

what flange are you guys using a t3 or a t4

hondacivic946 · 04-22-2008, 05:11 AM

Quote:

Originally Posted by Garage 808 Hatch

10,000 all day long

hells yea 10grand all day every day

Honda1949 · 04-22-2008, 05:35 AM

Hi Flatblack....Wondering also about the Borg/Bullseye 259 It is not listed in their catalog or website. If someone knows ......lets have the specs, maybe the pricing

swapit · 04-22-2008, 10:10 AM

i went 10.16 at 146mph on a complete b16,and then the slider went so couldnt try again and t/3 flange.car will tuned next week and will see nines in turbo street/spfwd trim.

04-19-2008, 01:17 PM	#2
Adriano Member Join Date: Sep 2002 Location: cracking Marco's ass @ E-town Posts: 1,600	Re: fastest b16 (flatblackhatch) Steve from CLM Motorsports went 10.2 @ 142. b16, eagle and cp, gt35r. Adriano __________________ 96 turbo hatch 9.91 @ 152 <-- 09 soft pass CLM Motorsports 908-578-3094

04-19-2008, 01:20 PM	#3
hondacivic946 Junior Member Join Date: Aug 2005 Location: Grindstone, PA, USA Posts: 574	Re: fastest b16 (Adriano) 10.8 on a stock b16 bottomend with a 35r on 20psi __________________ Hybridynamics, CFT, T1, Neukin 10.52 @ 139 on 576whp 28 psi 2008 X.XX @ XXX on 680 whp 34 psi on a lil b16 t3 Gt 35-67.82rrrrrrr 2009

04-19-2008, 01:32 PM	#4
Garage 808 Hatch Member Join Date: Jul 2006 Location: CRESWELL, Oregon, 97426 Posts: 3,254	Re: fastest b16 (hondacivic946) old car went 10.4 @137, new car will be faster after some crap is sorted out, and i finally man up and spray on it. so far 10.7, slipping clutch and no top end. 81mm __________________ 510whp/310ftlbs 89 crx drag car 10.55@134 new setup 600/380 on 24lbs 435whp EF hatch b16 turbo 10.43 @137 / nitrous only, 11.13@122.5 88 Wagovan, 355/321 new times when it thaws out here XBLive pedobearattack

04-19-2008, 01:54 PM	#5
nsxmatt Member Join Date: Nov 2001 Location: Indiana Posts: 8,931	I went 11.7 at 115 with a 92 Civic VX full weight, stock jdm b16, stock clutch, on 22" slicks. Turbonetics 57 trim at 10psi, Neukin manifold. Daily driven car. __________________ 92 Civic VX - 11.7@115 sold 93 Civic SIR-S - Real Deal RHD sold 05 Lotus Elise - Current

04-19-2008, 05:01 PM	#6
sirtef9 Junior Member Join Date: Jan 2007 Location: colorado springs, co, albania Posts: 571	Re: fastest b16 (Garage 808 Hatch) 10.8 on a stock b16 bottomend with a 35r on 20psi How Stock was the bottom end? Wanna Tune my shit?

04-19-2008, 05:53 PM	#7
boostedcivicsir Mr. Badwrench Join Date: May 2002 Location: the castle delaware Posts: 13,136	Re: fastest b16 (sirtef9) 10.72 at 130 84mm b16 crower/je gsr cams. t3t67ho 29 psi. __________________ anxiously awaiting the arrival of Lilah Mae Williamson First SFWD In The 9's In the First State! 9.98 147 t3t67h.o. power! nasteboyii drivin'

04-19-2008, 06:09 PM	#8
ef9civicgen4 Junior Member 1989 Honda Civic Join Date: Jun 2004 Location: Independence, MO, USA Posts: 110	Re: fastest b16 (boostedcivicsir) i went 10.8 @134 with an 81mm b16, t3t4 turbo, 23psi, stock head. this year is an 82mm b16, 30spi, bw 362et, ported head, itr cams, more rpm. hoping to make close to 600whp. should be good for deep 10s. __________________ 82mm B16, 608whp @ 29psi/ 10.2 @143mph first day out 09' upgrades: 25' M&H slicks, PIC Drag Suspension, Pro1 Cams

04-19-2008, 06:42 PM	#9
extremevtecracing Junior Member Join Date: Apr 2007 Location: Allen, TX, 75002 Posts: 334	Re: fastest b16 (flatblackhatch) I am trying to be the first B16 powered spfwd to go 9's. I have a ways to go. I know it's possible cause Phil Lam went 10.02 on a B16 and that is dam close, fortunately for me he sold his car. __________________ Get boosted or get your ass owned!!!

04-19-2008, 08:16 PM	#10
Boosteddb8 Junior Member Join Date: Jul 2006 Location: west covina, ca, US Posts: 893	Re: fastest b16 (extremevtecracing) went 10.15 @ 146mph b16 with 85mm aries pistons, stock b16 crank, eagle rods and eagle sleeves, stock head skunk2 valve train and ctr cams. PT67 turbo full race top mount all in a sfwd Integra 2580lbs heres the car a nhra finals last seson. The 1st pass broke the turbo shaft, 2nd and 3rd pass low 10's and last pass missed 3rd gear __________________ Sponsors LTautomotive.com bisimoto.net goldeneaglemfg.com

04-20-2008, 08:07 AM	#11
clarkBAR Junior Member Join Date: Jan 2003 Location: Va Beach, VA, us Posts: 78	Re: fastest b16 (extremevtecracing) it has already been done __________________ 91' CRX Turbo B16 9.68 @157 Accuracy Automotive

04-20-2008, 08:30 AM	#12
fastforwardracer Junior Member Join Date: Nov 2005 Location: GOING FASTER IN DA 804 Posts: 171	Re: fastest b16 (clarkBAR) iwas wondering if you were going to chime in. have you redone you r motor yet?i would have posted about you but i didnt know your exact times. __________________ TEAM FASTFORWARD 99 EM1 VORTECH SUPERCHARGED - Soon to be the Quickest supercharged Honda B series

04-20-2008, 05:05 PM	#14
Semnos Junior Member Join Date: Oct 2004 Location: Eindhoven, The Netherlands Posts: 180	Re: fastest b16 (matt k) Yup it has already been done. http://videos.streetfire.net/v...8.htm

04-20-2008, 06:17 PM	#15
extremevtecracing Junior Member Join Date: Apr 2007 Location: Allen, TX, 75002 Posts: 334	Re: fastest b16 (Semnos) If I recall right the RLZ car has a GSR head on it. Not a B16 __________________ Get boosted or get your ass owned!!!

04-20-2008, 07:41 PM	#16
Garage 808 Hatch Member Join Date: Jul 2006 Location: CRESWELL, Oregon, 97426 Posts: 3,254	we'll see what happens, weather permitting, i'll be at the track saturday on low boost. see if the clutch will hold and quit overboosting __________________ 510whp/310ftlbs 89 crx drag car 10.55@134 new setup 600/380 on 24lbs 435whp EF hatch b16 turbo 10.43 @137 / nitrous only, 11.13@122.5 88 Wagovan, 355/321 new times when it thaws out here XBLive pedobearattack

04-20-2008, 07:55 PM	#17
TurboB16A300Hpteg Junior Member Join Date: Apr 2007 Location: syracuse, ny, US Posts: 161	Re: (Garage 808 Hatch) any guess on how fast my car willgo its a 90 integra gs no power windows locks took out PS and AC has a b16 81.5mm srp 8.5.1 pistons,eagle h beam rods,darton MID sleeves.ARp head studs,supertech dual valve springs and retainers,Pro products 68mm Tb and whirlwind intake manifold port matched to the 68 mill TB,aem fuel rail,1000CC injectors, full race ram horn,3 inch Dp,turbonetics racegate,Garret t3/t67 Dual BB P trim with 63 a/r, on hondata S300.. tranny is a 00 type r with a 4.4 final drive with gator racing axles and a clutch masters FX5oo cars on a 24.5 inch slick gunna run 20 Psi my whp should be in the 400s sumwhere and its on 93 octane gass what E/t u think this car may cutt any ideas of estimates would be Great Thanks __________________ Anthony Full-R[i]ace t3/t67 bb DA

04-20-2008, 09:32 PM	#18
extremevtecracing Junior Member Join Date: Apr 2007 Location: Allen, TX, 75002 Posts: 334	Re: (TurboB16A300Hpteg) Didn't really need the run down, a simple note of how much power you make can give you a real close idea. __________________ Get boosted or get your ass owned!!!

04-21-2008, 11:04 AM	#19
stanzione88 Junior Member Join Date: Mar 2008 Location: miami, fl, usa Posts: 118	Re: (extremevtecracing) just curious, how high are you guys revving this little monsters? built b16a turbo in the works __________________ B16a Piston and Rod, 60-1 Turbo, Custom topmount, 38mm WG, 20+ psi and C16 Fuel... Lets see what happens.

04-21-2008, 11:22 AM	#20
flatblackhatch Junior Member Join Date: Feb 2005 Location: wheaton, il, usa Posts: 333	Re: (stanzione88) thanks for all the imput so far where thinking of a borg warner 259 anyone heard good or bad about this turbo where shooting to hit 10s. Its going to be built by king motorsports out of wisconsin. if you know anything bout this turbo let me know.

04-21-2008, 05:28 PM	#22
flatblackhatch Junior Member Join Date: Feb 2005 Location: wheaton, il, usa Posts: 333	Re: (Garage 808 Hatch) what flange are you guys using a t3 or a t4

04-22-2008, 05:35 AM	#24
Honda1949 Junior Member Join Date: Mar 2005 Location: Wheaton, Illinois, USA Posts: 37	Re: (flatblackhatch) Borg/Bullseye 259 Hi Flatblack....Wondering also about the Borg/Bullseye 259 It is not listed in their catalog or website. If someone knows ......lets have the specs, maybe the pricing

04-22-2008, 10:10 AM	#25
swapit Member Join Date: Aug 2003 Location: VALVE DROPPIN,NJ Posts: 1,133	Re: (flatblackhatch) Borg/Bullseye 259 (Honda1949) i went 10.16 at 146mph on a complete b16,and then the slider went so couldnt try again and t/3 flange.car will tuned next week and will see nines in turbo street/spfwd trim. __________________ BART BUILT(fat guy goin skinny) 92 vx b16a 9.94 at 152.6 and creepin 1st STATE MOTORSPORTS,EVANS TUNING,RSTECH,B&W MOTORWORKS

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search