Honda and Acura Technical Forums

regamaster · 08-23-2008, 05:51 PM

Quote:

Originally Posted by onequickcrx

It's called threadjacking, that would upset anybody. Read The Forum Rules.

thank you!

I am just here to simply promote the transmission that is being devoloped buy Go Power Motorsports (not myself) and is in the final stages. As We all know there is no dog transmission that is "available" at this time that is holding up and is readily available.

I know PPG is making their product, no problem with that, they make great road racing transmission with the right gearing. Everyone makes their own products their own way.

however, I am not here to post up about other companies and then compare them to x company, until someone else made their comments.

As for an update, the transmission shown on the first page or above was the beta 1 version and has gone through some serious changes. In comparision, they look nothing like the previous version.

I did not mean to offend anyone or any company, but you would have to understand the position that was brought up when someone comes on and Threadjacks.

Modified by regamaster at 6:33 PM 8/23/2008

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

fresh_manny21 · 08-23-2008, 09:40 PM

Quote:

Originally Posted by regamaster

thank you!

I am just here to simply promote the transmission that is being devoloped buy Go Power Motorsports (not myself) and is in the final stages. As We all know there is no dog transmission that is "available" at this time that is holding up and is readily available.

I know PPG is making their product, no problem with that, they make great road racing transmission with the right gearing. Everyone makes their own products their own way.

however, I am not here to post up about other companies and then compare them to x company, until someone else made their comments.

As for an update, the transmission shown on the first page or above was the beta 1 version and has gone through some serious changes. In comparision, they look nothing like the previous version.

I did not mean to offend anyone or any company, but you would have to understand the position that was brought up when someone comes on and Threadjacks.

Modified by regamaster at 6:33 PM 8/23/2008

I was not thread jacking I also let you know if I offended you I would delete my post I was just letting some one know that if you can not afford a dog box there is a tranny that people can afford that will hold up I done the testing on my car so I know it works I did not say nothing about the ppg dog box that's available so I did not think I was doing anything wrong just giving out info

Modified by fresh_manny21 at 9:48 PM 8/23/2008

AllMTRWH0R3 · 09-03-2008, 12:14 PM

I really like the thread. Good info and I appreciate people trying to move the sport forward with parts that will help people looking for this one part. What's the ETA and the price for something like this?

crx2nr822 · 09-03-2008, 03:40 PM

Quote:

Originally Posted by AllMTRWH0R3

What's the ETA and the price for something like this?

More than you can afford pal

Sup foo!?

regamaster · 11-03-2008, 10:26 AM

UPDATED:

Gear set has been tested in two cars as of lately.

One is making over 920whp and 600tq. Dyno pulls were
made with 11 sec ramp time with 20+ pulls. A total of 50+ pulls have been
made with over 800whp and 600tq on each one. The 11 second ramp
time was used to put the most amount of stress on the gears to put the most
beating on them as possible.

The other car is a N/A All Motor car that we did some testing on this past weekend.
The AM car is making 380+whp and 250tq and during the shakedown passes, the car went 9.80s@140.

Both cars have gone 9s and trans are holding strong.

Antilag · 11-03-2008, 11:00 AM

Looks good guys!!

k20pinay · 11-03-2008, 02:37 PM

thanks! the tranny is super sweet!!!!!!

tony tone · 11-03-2008, 04:19 PM

man that thing looks beefy.

regamaster · 11-03-2008, 04:26 PM

That picture is version 1 of 5.

A lot of testing was put into the developement of Go Power's Motorsports
Trans.

A train · 11-04-2008, 07:43 PM

make that 3 cars john!

regamaster · 11-05-2008, 09:04 AM

Quote:

Originally Posted by A train

make that 3 cars john!

I should make that 5 cars now !

six sigma racing · 11-05-2008, 11:38 AM

it will be 6 soon.. GO-POWER!

clockedout · 11-05-2008, 12:10 PM

More than likely 7!!

k20tuRbo · 11-06-2008, 06:43 AM

Are they for sale yet?

regamaster · 11-06-2008, 08:18 AM

contact go power motorsports for more info on them.

evanlabs · 11-06-2008, 12:56 PM

wow, anything for the B series in the works?

pumafeet10 · 11-06-2008, 01:11 PM

could someone tell me where these gears are made?

regamaster · 11-06-2008, 01:21 PM

They are made in the US.

k20tuRbo · 11-08-2008, 02:07 PM

Quote:

Originally Posted by regamaster

contact go power motorsports for more info on them.

Do you know the ratios?

EM2Civic · 11-09-2008, 12:03 PM

I don't know if that was really threadjacking... He just provided a cheaper solution it's not like someone spending 2k on the PPG's would magically come up with another 4k to drop on your set, as a fellow member said he wish he could afford them. Oh well hopefully no one got offended, glad to see some competition in the Kseries trans department better for all of us.

go-pwr · 11-09-2008, 02:57 PM

The ratios are 3.08, 1.88, 1.45, 1.13 works great all motor with the 4.78 final and great for turbo with the 4.05 final

NativeSon · 11-25-2008, 06:11 PM

Could someone please tell me the size of the K-series input shaft and spline count?

AllMTRWH0R3 · 11-27-2008, 09:57 AM

Quote:

Originally Posted by go-pwr

The ratios are 3.08, 1.88, 1.45, 1.13 works great all motor with the 4.78 final and great for turbo with the 4.05 final

Just bumping for something I'm saving up for

(plus the new HT erased my subscription to this thread).

velocitytrends · 11-27-2008, 11:56 AM

Any updates and prices?

regamaster · 11-28-2008, 02:47 PM

Quote:

Originally Posted by velocitytrends

Any updates and prices?

The trans are now currently in 1 turbo car (Javier from Hondata with 920+whp and 600ft tq) and 2 All motor Cars. Javier's box has over 40 dyno pulls and over 15 passes and is still going strong. Our All Motor (fastest to date (9.87) )car has over 10 passes and still looks like new!

3 more trans are going in soon. 1 hot rod car and the others 2 are All Motor Cars.

For Pricing contact www.Go-Pwr.com

09-03-2008, 12:14 PM	#53
AllMTRWH0R3 Member Join Date: Nov 2003 Location: Deceptive, CA 805, Jerry Built NA. Posts: 2,978	Re: (fresh_manny21) I really like the thread. Good info and I appreciate people trying to move the sport forward with parts that will help people looking for this one part. What's the ETA and the price for something like this? __________________ "The One & Only" Deceptive 805 Jerry Built

11-03-2008, 10:26 AM	#55
regamaster Junior Member Join Date: Jan 2004 Location: Land of the Lost, usa Posts: 973	Re: (crx2nr822) UPDATED: Gear set has been tested in two cars as of lately. One is making over 920whp and 600tq. Dyno pulls were made with 11 sec ramp time with 20+ pulls. A total of 50+ pulls have been made with over 800whp and 600tq on each one. The 11 second ramp time was used to put the most amount of stress on the gears to put the most beating on them as possible. The other car is a N/A All Motor car that we did some testing on this past weekend. The AM car is making 380+whp and 250tq and during the shakedown passes, the car went 9.80s@140. Both cars have gone 9s and trans are holding strong.

11-03-2008, 11:00 AM	#56
Antilag Moderator Join Date: Jan 2004 Location: Hooper, Utah, USA Posts: 2,429	Re: (regamaster) Looks good guys!! __________________ 9.45@164 Thanks Guys! Mfactory,Spec Clutch, Torco oil, Bullseye turbos, Hondata, Supertech, Avid.

11-03-2008, 02:37 PM	#57
k20pinay Member Join Date: Jan 2002 Location: Los Angeles, CA, USA Posts: 1,491	Re: (Antilag) thanks! the tranny is super sweet!!!!!! __________________ www.nalaniwhatley.com Go Power Motorsports Battle of the Imports

11-03-2008, 04:19 PM	#58
tony tone Junior Member 2005 Cadillac CTS Join Date: Sep 2008 Location: miami Posts: 372	Re: man that thing looks beefy. __________________ 2005 CTS-V 360forged TD Autowerkes

11-03-2008, 04:26 PM	#59
regamaster Junior Member Join Date: Jan 2004 Location: Land of the Lost, usa Posts: 973	Re: Re: (tony tone) That picture is version 1 of 5. A lot of testing was put into the developement of Go Power's Motorsports Trans.

11-04-2008, 07:43 PM	#60
A train Member Join Date: Mar 2004 Location: modesto, ca, usa Posts: 2,001	Re: (regamaster) make that 3 cars john! __________________ M Factory,Skunk 2,Competition Clutch,Golden Eagle,AFI,Royal purple,Hondata,Venom, Portflow Designs,Bullseyepower,Arias pistons,JCR,Supertech,Competiton race fuels,DSS www.CTRDynosports.com 209 521 DYN0 www.ctrparts.com

11-05-2008, 11:38 AM	#62
six sigma racing Member Join Date: Feb 2003 Location: San Leandro, CA, USA Posts: 1,856	Re: (regamaster) it will be 6 soon.. GO-POWER! __________________ We've moved Six Sigma Racing 27510 Industrial blvd. #2 Hayward Ca 94545 (510) 783-5552 http://www.sixsigmaracing.com K20A complete short blocks for sale http://www.honda-tech.com/zerothread?id=2258546

11-05-2008, 12:10 PM	#63
clockedout Junior Member Join Date: Jun 2002 Location: Union City, CA, USA Posts: 179	Re: (six sigma racing) More than likely 7!! __________________ DIMENSIONAL 1 RACING http://www.dimensional1.com http://www.mydragcar.com/clockedout

11-06-2008, 06:43 AM	#64
k20tuRbo Junior Member Join Date: Mar 2005 Location: Salt Lake City, Utah Posts: 251	Re: (clockedout) Are they for sale yet? __________________ 658whp 447wtq

11-06-2008, 08:18 AM	#65
regamaster Junior Member Join Date: Jan 2004 Location: Land of the Lost, usa Posts: 973	Re: (k20tuRbo) contact go power motorsports for more info on them.

11-06-2008, 12:56 PM	#66
evanlabs Junior Member Join Date: Nov 2008 Location: san jose, CA, usa Posts: 3	Re: (regamaster) wow, anything for the B series in the works?

11-06-2008, 01:11 PM	#67
pumafeet10 Member Join Date: Jun 2003 Location: York, PA, 17403 Posts: 1,714	Re: (regamaster) could someone tell me where these gears are made? __________________ NO MAS Accord now 00 Hatchy" The Lobsta" let the madness begin

11-06-2008, 01:21 PM	#68
regamaster Junior Member Join Date: Jan 2004 Location: Land of the Lost, usa Posts: 973	Re: (pumafeet10) They are made in the US.

11-09-2008, 12:03 PM	#70
EM2Civic Member Join Date: Sep 2003 Location: CA, Canada Posts: 1,132	Re: (regamaster) I don't know if that was really threadjacking... He just provided a cheaper solution it's not like someone spending 2k on the PPG's would magically come up with another 4k to drop on your set, as a fellow member said he wish he could afford them. Oh well hopefully no one got offended, glad to see some competition in the Kseries trans department better for all of us. __________________ K24A4 Pistons+Rods $100 obo PM 12.902@116.95 with no traction at all...

11-09-2008, 02:57 PM	#71
go-pwr Junior Member Join Date: Dec 2007 Location: Oak Hills, Ca, USA Posts: 16	Re: (k20tuRbo) The ratios are 3.08, 1.88, 1.45, 1.13 works great all motor with the 4.78 final and great for turbo with the 4.05 final __________________ GO Power Motorsports Hesperia, Ca 92344 (760)949-1275

11-25-2008, 06:11 PM	#72
NativeSon Junior Member Join Date: Sep 2004 Location: Chicago, IL, USA Posts: 541	Could someone please tell me the size of the K-series input shaft and spline count?

11-27-2008, 11:56 AM	#74
velocitytrends Member Join Date: Dec 2003 Location: Jacksonville, FLORIDA Posts: 1,319	Any updates and prices? __________________ Velocity Trends Inc. (Circa 2001) www.velocitytrends.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search