Just did my wire tuck. What do you guys think?
#1
Banned
Thread Starter
Join Date: Mar 2007
Location: Orange Park, FL, US
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
Just did my wire tuck. What do you guys think?
Well to get things started, i was really bored with some time of my hands. I did the drivers side wire harness and ran it through the fenderwell. Planning on doing the passenger side around next week. Everything was pretty much straight-forward. I DID NOT extend any wires.
Well lets get on to the pictures.
Heres what i had to start out with:
Sorry i didnt have any before pictures taken, after i had everything off i relialized that i should take some pictuers.
I have also already removed the windshield wiper tank so it kinda free'd up alot of space on the fender/bumper to work with.
Heres a pic of the first wires pulled through.
Nice pic of my tein dampner and the driver harness being pulled.
Stuff just being in the yard.
Some more of the harness being ran in the fender.
Finally coming together!@!
Some of my mess inside the firewall lol, But i wrapped it and tucked it under the dash.
Wire tuck is complete!
I had also tucked the wires for my windshield wipers and brake fluid sensor, and ran it just like the harness.
The finished product. Sorry for the quailty, there was a lot of mist floating in the air. It was really foggy.
Well i hope you guys enjoyed looking at the pictures.
Leave comments, flamers welcomed
Well lets get on to the pictures.
Heres what i had to start out with:
Sorry i didnt have any before pictures taken, after i had everything off i relialized that i should take some pictuers.
I have also already removed the windshield wiper tank so it kinda free'd up alot of space on the fender/bumper to work with.
Heres a pic of the first wires pulled through.
Nice pic of my tein dampner and the driver harness being pulled.
Stuff just being in the yard.
Some more of the harness being ran in the fender.
Finally coming together!@!
Some of my mess inside the firewall lol, But i wrapped it and tucked it under the dash.
Wire tuck is complete!
I had also tucked the wires for my windshield wipers and brake fluid sensor, and ran it just like the harness.
The finished product. Sorry for the quailty, there was a lot of mist floating in the air. It was really foggy.
Well i hope you guys enjoyed looking at the pictures.
Leave comments, flamers welcomed
#5
Honda-Tech Member
Re: Just did my wire tuck. What do you guys think? (yoffer)
so you didnt have to extend any wires? that is pretty cool I wish I could do that to my eh2
#6
Banned
Thread Starter
Join Date: Mar 2007
Location: Orange Park, FL, US
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just did my wire tuck. What do you guys think? (Markb16a)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Markb16a »</TD></TR><TR><TD CLASS="quote">so you didnt have to extend any wires? that is pretty cool I wish I could do that to my eh2 </TD></TR></TABLE>
No i didnt extend any of the wires.
No i didnt extend any of the wires.
Trending Topics
#8
Banned
Thread Starter
Join Date: Mar 2007
Location: Orange Park, FL, US
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just did my wire tuck. What do you guys think? (kaiba)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kaiba »</TD></TR><TR><TD CLASS="quote">Should've tuck the spark plug wires too. </TD></TR></TABLE>
lol
lol
#14
Former Moderator
Re: (nater_1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nater_1 »</TD></TR><TR><TD CLASS="quote">you need to put some insulation over the metal where the wires pull through. That metal will wear through the wires...</TD></TR></TABLE>
I too was going to suggest this.
Buy some corrugated wire loom and place it over the wire harnesses and make sure it secured well. You also might want to add some double sidsed tape, or cut some hose and wrap it around the sharp edged area of that square hole the wires are running through.
I too was going to suggest this.
Buy some corrugated wire loom and place it over the wire harnesses and make sure it secured well. You also might want to add some double sidsed tape, or cut some hose and wrap it around the sharp edged area of that square hole the wires are running through.
#15
Banned
Thread Starter
Join Date: Mar 2007
Location: Orange Park, FL, US
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
Re: (B18C5-EH2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C5-EH2 »</TD></TR><TR><TD CLASS="quote">
I too was going to suggest this.
Buy some corrugated wire loom and place it over the wire harnesses and make sure it secured well. You also might want to add some double sidsed tape, or cut some hose and wrap it around the sharp edged area of that square hole the wires are running through.
</TD></TR></TABLE>
I will, going to be doing it real soon, it was getting late, and i didnt have any wire loom/electrical tape.
I too was going to suggest this.
Buy some corrugated wire loom and place it over the wire harnesses and make sure it secured well. You also might want to add some double sidsed tape, or cut some hose and wrap it around the sharp edged area of that square hole the wires are running through.
</TD></TR></TABLE>
I will, going to be doing it real soon, it was getting late, and i didnt have any wire loom/electrical tape.
#18
Banned
Thread Starter
Join Date: Mar 2007
Location: Orange Park, FL, US
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
Re: (importdreamer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by importdreamer »</TD></TR><TR><TD CLASS="quote">did you remove the windshield wiper fluid tank all together or relocate it?</TD></TR></TABLE>
I removed it completely. The only thing that remains is the plug for the fluid motor.
I have it for sale along with some other stuff here:http://hondamarketplace.com/zerothread?id=2136108
I removed it completely. The only thing that remains is the plug for the fluid motor.
I have it for sale along with some other stuff here:http://hondamarketplace.com/zerothread?id=2136108
#23
Honda-Tech Member
Join Date: Aug 2002
Location: Denton, TX
Posts: 2,150
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Bob Dole!)
Damn j00! Now I shall have to do mine as well.
-sigh-
I was bored anyway.
Looks badass by the way. Great job, and thanks for posting up pics and sharing.
-sigh-
I was bored anyway.
Looks badass by the way. Great job, and thanks for posting up pics and sharing.
#24
Banned
Thread Starter
Join Date: Mar 2007
Location: Orange Park, FL, US
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Dramier)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dramier »</TD></TR><TR><TD CLASS="quote">Damn j00! Now I shall have to do mine as well.
-sigh-
I was bored anyway.
Looks badass by the way. Great job, and thanks for posting up pics and sharing.
</TD></TR></TABLE>
No problem, it wasnt as hard as i thought it would be.
-sigh-
I was bored anyway.
Looks badass by the way. Great job, and thanks for posting up pics and sharing.
</TD></TR></TABLE>
No problem, it wasnt as hard as i thought it would be.
#25
Honda-Tech Member
Re: (yoffer)
i did a wire tuck on my eh too. i wish i could have shaved the whole bay but i DD my car so i couldn't have the car down for too long. yours looks great. where/how did you relocate the engine harness.