Honda and Acura Model Specific Forums

sspem2 · 12-27-2007, 06:43 PM

http://www.hincity.com/blogs/e...C24D3

were gonna take it back to the ol school for a second and show u where it all began.

my ricer stage lol

then i put the lambo doors now when they came out and changed out the wheels to racing harts c3's

then i changed to volks gtn which orignally were silver

then i decided to change it up alot. changed the paint to nsx orange and on the way back from the paint shop i bent my wheels and i had some rotas so i put them on. took off the lambo doors to cuz they got wayyy to ricey with alot of people with it on shitty cars

then i decided to change the shitty d17 to the k20

before

after

link to my build thread of my k20

http://www.k20a.org/forum/showthread.php?t=28580

hope u enjoy.

shes my baby and i love her.

have a beer

Interior:
Bride Ergo II JDM All Red With Gradation Seats
-DC5 Bride Brackets/Sliders
-Takata Harnesses
-Takata Pads
-Custom Black Carpet
-Rear Interior Fully Gutted
-Rear Interior Floor Black Coated
-Mugen Gold Shift Knob
-Authentic JDM CTR Shift Boot
-DC5 Buddy Club Short Shifter With Custom Bushings
-Oem Civic Black Floormats
-DC5 Carbon Fiber Fuel Pump Cover
-Mugen ECU Stand
-JDM Honda Dual Din Stereo Carbon Fiber Cover(Shows Only)

Exterior:
-Kaminari Full Fascia Kit
-194 Amber Bulbs(Parking Light)
-7443 Amber Bulbs(Turn Signal)
-XenonDepot HIDS 5000K White
-Real Carbon Fiber Grill
-Real Carbon Fiber License Plate Holder
-MimoUSA Real Carbon Fiber Door Pillars
-EP3 Cusco Exhaust Hanger Bushings
-Authentic JDM EP3 Emblems
-Seibon OEM Carbon Fiber Hood
-VIS Racing Carbon Fiber Trunk
-Bomex Aero Powered Side Mirrors
-Acura NSX Imola Orange Pearl Custom Paint Job

Engine:
-K20A2 Engine Swap
-Hondata Intake Manifold Gasket
-Hondata K-Pro ECU
-Stainless Steel Fuel Lines
-Hybrid Racing Black Fuel Rail
-Hybrid Racing Wiring Conversion Harness
-Hasports Motor Mounts
-EP3 Samco Black Upper And Lower Radiator Hoses
-EP3 Idler Pulley
-Mugen License Plate Bolts Throughtout Engine Bay Replacing Screws For A Clean Look
-Mugen Sock Reservoir Covers
-Authentic JDM Valve Cover
-Authentic JDM Dip Stick
-Relocated Battery Into Trunk
-Wire Tuck Through out Engine Bay
-ARC Titantium Spark Plug Cover
-ARC DC5 Super Induction Box & Super Intake Chamber
-ARC Radiator Cap
-ARC Silver Oil Cap
-Greddy Evo2 Catback Exhaust
-Greddy Polished Radiator Breather Tank
-DC5 Buddy Club Race Header

Suspension:
-Progress Front/Rear Sway Bars
-Dezod Motorsports Competition Spec Front/Rear Sway Bar Endlinks
-Tein SS-P Dampers
-Function7 Lower Control Arms
-SPC Rear Camber Kit
-Volk Racing Gt-n 18s Custom Powdercoated Gold Wrapped In Toyo FZ4 215-35-18
-Brembo Sport Big Brake Kit
-ARP Extended Wheel Studs
-Kics Project R40 Neo Chrono Lug Nuts Extended
-DC5 Cusco Front Upper Strut Bar
-DC5 Cusco Rear Upper Strut Bar

In Car Electronics:
Alpine IDA-X001 Receiver

Future Plans:

Doing Now:
-Frankenstein K20 Swap
-Mishimoto Radiator And Fans
-Relocate Fuse Box
-Delete ABS
-Full Wiretuck
-Paint Engine Bay Battleship Grey

Modified by sspem2 at 5:28 AM 10/31/2008

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

EM2ner · 12-27-2007, 07:34 PM

Sweet Ride

Clean install

splinter888 · 12-27-2007, 08:24 PM

One of my fav em2's looks amazing :0 great job

tunerkid7 · 12-27-2007, 08:35 PM

looks great, i love the paint, then again i love your whole car

Pnoymugen · 12-27-2007, 08:50 PM

Car looks great! Always been a fan of your car

bakerboy0642 · 12-27-2007, 08:54 PM

def one of my favs, do you have a stock radiator??? and also on your d17 - did you add like stainless steel hose lines instead of rubber hoses or something on that intake

toyomatt84 · 12-27-2007, 08:57 PM

Quote:

Originally Posted by bakerboy0642

def one of my favs, do you have a stock radiator??? and also on your d17 - did you add like stainless steel hose lines instead of rubber hoses or something on that intake

It looks like he had nitrous.

sspem2 · 12-27-2007, 08:58 PM

Quote:

Originally Posted by toyomatt84

It looks like he had nitrous.

bingo

Quote:

Originally Posted by bakerboy0642

def one of my favs, do you have a stock radiator??? and also on your d17 - did you add like stainless steel hose lines instead of rubber hoses or something on that intake

yes dc5 stock radiator and fans. nitrous lines.

s0ltker · 12-29-2007, 05:12 AM

bumpy bumpy for the kswap sunkist.

U still going to the meet in tampa in a couple of weeks?

sspem2 · 12-29-2007, 05:48 AM

Quote:

Originally Posted by s0ltker

bumpy bumpy for the kswap sunkist.

U still going to the meet in tampa in a couple of weeks?

yup jdm meet ftw

b0yg0tskills · 12-29-2007, 06:29 AM

i actually think that front kit is alright. what kind of front is that?

Yoshimi · 12-29-2007, 07:13 AM

Kaminari front bumper if i remember rightly.

s0ltker · 12-29-2007, 03:09 PM

Quote:

Originally Posted by sspem2

yup jdm meet ftw

alright man, see ya there, save me a spot

sspem2 · 12-29-2007, 11:29 PM

Quote:

Originally Posted by s0ltker

alright man, see ya there, save me a spot

i will and give u my console

orlandoEM2 · 12-31-2007, 06:21 PM

what kind of mirrors are those, where did you get them? EM2 baby

toyomatt84 · 12-31-2007, 06:59 PM

Quote:

Originally Posted by orlandoEM2

what kind of mirrors are those, where did you get them? EM2 baby

Bomex Mirrors.

katzenjammer84 · 12-31-2007, 07:20 PM

sspem, is that a Carbing front strut tower bar?

Modified by katzenjammer84 at 9:39 PM 12/31/2007

sspem2 · 01-01-2008, 07:55 AM

Quote:

Originally Posted by katzenjammer84

sspem, is that a Carbing front strut tower bar?

Modified by katzenjammer84 at 9:39 PM 12/31/2007

cusco front and rear bars

sspem2 · 01-01-2008, 12:04 PM

Quote:

Originally Posted by toyomatt84

Bomex Mirrors.

bingo. i got them from a guy on the 7thgen forums used long time ago.

ncem2 · 01-02-2008, 10:31 PM

The car is hot. Clean swap too.

stinkypinky1011 · 01-04-2008, 05:57 PM

is there anything happening tonite

sspem2 · 01-04-2008, 09:35 PM

Quote:

Originally Posted by stinkypinky1011

is there anything happening tonite

not im aware of but i didnt go out. me and my gf made it a blockbuster nite. lol just chillen on the couch and watched a movie

stinkypinky1011 · 01-05-2008, 04:42 PM

well if you go to the castway ill see you there

sspem2 · 01-05-2008, 10:00 PM

Quote:

Originally Posted by stinkypinky1011

well if you go to the castway ill see you there

u mean causeway?

Ekb18c5_BR · 01-06-2008, 03:21 PM

12-27-2007, 07:34 PM	#2
EM2ner Join Date: Feb 2007 Location: Warwick, RI, US Posts: 222	Re: my build thread em2 w/ k20/mugen/arc/bride/takata/cusco/buddyclub/greddy/volk = omgjdmsexy0 (ssp Sweet Ride Clean install

12-27-2007, 08:24 PM	#3
splinter888 Junior Member Join Date: Jul 2007 Location: Sayreville, N.J, United STates Posts: 189	Re: my build thread em2 w/ k20/mugen/arc/bride/takata/cusco/buddyclub/greddy/volk = omgjdmsexy0 (ssp One of my fav em2's looks amazing :0 great job

12-27-2007, 08:35 PM	#4
tunerkid7 Member Join Date: Jun 2007 Location: Nor Cal, CA, USA Posts: 1,003	Re: my build thread em2 w/ k20/mugen/arc/bride/takata/cusco/buddyclub/greddy/volk = omgjdmsexy0 (ssp looks great, i love the paint, then again i love your whole car

12-27-2007, 08:50 PM	#5
Pnoymugen Junior Member Join Date: May 2002 Location: Henderson, Nevada, U.S. Posts: 330	Re: My Build Thread (sspem2) Car looks great! Always been a fan of your car

12-29-2007, 05:12 AM	#9
s0ltker Junior Member Join Date: Apr 2006 Location: 941 Posts: 193	Re: (sspem2) bumpy bumpy for the kswap sunkist. U still going to the meet in tampa in a couple of weeks? __________________ 2005 EM2

12-29-2007, 06:29 AM	#11
b0yg0tskills Junior Member Join Date: Aug 2006 Location: milwaukee, wi, usa Posts: 366	i actually think that front kit is alright. what kind of front is that?

12-29-2007, 07:13 AM	#12
Yoshimi Asleep in the Back Join Date: May 2006 Posts: 2,418	Re: (b0yg0tskills) Kaminari front bumper if i remember rightly. __________________ ~ CW DC5 Integra Type R ~

12-31-2007, 06:21 PM	#15
orlandoEM2 Junior Member Join Date: Dec 2007 Location: Mathis, Texas, United States Posts: 35	Re: My Build Thread (sspem2) what kind of mirrors are those, where did you get them? EM2 baby

12-31-2007, 07:20 PM	#17
katzenjammer84 Member 2004 Honda Civic Join Date: Apr 2002 Location: Southern NH Posts: 1,712	sspem, is that a Carbing front strut tower bar? Modified by katzenjammer84 at 9:39 PM 12/31/2007 __________________ 04 Civic EX Coupe 92 Accord EX Sedan

01-02-2008, 10:31 PM	#20
ncem2 Junior Member Join Date: Jan 2008 Location: Fayetteville, NC Posts: 277	The car is hot. Clean swap too. __________________ Pedro's Auto Body and Customs, Fayetteville NC !e@stCo@sT! 4LIFE

01-04-2008, 05:57 PM	#21
stinkypinky1011 Junior Member Join Date: Mar 2007 Location: TAMPA, fl, U.S.A Posts: 385	is there anything happening tonite __________________ 2004 White em2 (DD) http://images.honda-tech.com/set1/smile/emthup.gif 2004 Black em2 (sold) http://images.honda-tech.com/set1/smile/emsad.gif

01-05-2008, 04:42 PM	#23
stinkypinky1011 Junior Member Join Date: Mar 2007 Location: TAMPA, fl, U.S.A Posts: 385	Re: (sspem2) well if you go to the castway ill see you there __________________ 2004 White em2 (DD) http://images.honda-tech.com/set1/smile/emthup.gif 2004 Black em2 (sold) http://images.honda-tech.com/set1/smile/emsad.gif

01-06-2008, 03:21 PM	#25
Ekb18c5_BR Join Date: May 2007 Location: fl, us Posts: 109	Re: (sspem2) __________________ 96 civic Ek hb -ITR_[b]B18c5__ 10 lbs[b] NEW built in progress.....

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search