Honda and Acura Technical Forums

BuBBa y0! · 09-14-2007, 05:26 PM

Has anybody made a manifold other than a topmount w/ a divided collector? Just an idea....

We see them everywhere on different types of topmounts, but why not other designs? Are they only effective on a topmount?

Any info would be appreciated!

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

.RTErnie · 09-14-2007, 05:33 PM

I'll do it an make the new bandwagon.

tepid1 · 09-14-2007, 05:36 PM

Jesse and Andy @ AFI made several a few months ago.... and they were divided

That bandwagon has already been started.

.RTErnie · 09-14-2007, 05:39 PM

too bad nobody's on their bandwagon...mine's the new rave.

DaveF · 09-14-2007, 07:29 PM

Ernie, didnt your sig just say "europe" a few days ago ? lol

here is an old revhard manifold

Modified by DaveF at 10:09 AM 9/15/2007

tepid1 · 09-15-2007, 05:31 AM

AFI "bottom mount"

cluelessmale · 09-15-2007, 06:38 AM

sexy

tepid1 · 09-15-2007, 06:46 AM

93CX · 09-15-2007, 07:55 AM

AFI

Great looking stuff

*Boostwerks* · 09-15-2007, 08:30 AM

Heres the start of my personal divided bottom mount. It'll be able to fit in a CRX chassis, and will be fully polished.

DOHCarp · 09-15-2007, 09:14 AM

I had one about three years ago made by lovefab. used a GT37 with divided housing 1.12 ar it ran great but had some issues with the car only clean time was a 1/8 mile pass witha 6.8 at 107mph. here are some pics of it.

*Boostwerks* · 09-15-2007, 09:37 AM

damn, lol. Cody definetly over complicated that one.

SwappedTURBOegg · 09-15-2007, 10:03 AM

haha thats crazy looking.

.RTErnie · 09-15-2007, 10:06 AM

Quote:

Originally Posted by DaveF

Ernie, didnt your sig just say "europe" a few days ago ? lol

yeah i just figured out australia wasn't in europe

haha yes it did say europe..and then i figured out that they were more common down under.

*Boostwerks* · 09-15-2007, 11:35 AM

Quote:

Originally Posted by .RTErnie

yeah i just figured out australia wasn't in europe

haha yes it did say europe..and then i figured out that they were more common down under.

lol. Where you located in portland man? My GF's sister lives in portland. You guys get all the crazy ass roads that I'm jelous of.

BTW, those dimensions help at all?

EARLdaSQUIRREL · 09-15-2007, 11:47 AM

i remember seeing this manifold at redshift back in like 2003 or so

*Boostwerks* · 09-15-2007, 11:51 AM

Hrmm...I wonder if that GT37 divided T3 housing could be adapted to the GT30 turbine. I was going to go with the ATP divided housing, but it's only a .78ar. I want a huge A/R to really take advantage of the divided manifold.

BuBBa y0! · 09-15-2007, 03:40 PM

how did they perform? any numbers?

HiProfile · 09-15-2007, 11:23 PM

Do you guys know how much easier it would be to make a divided bottom mount if you actually used that space you still have between your hood and manifold? You can have that manifold sticking up much further than you might think before it comes too close where engine movement will make it hit, or that 1/2" of insulation wouldn't be enough.

*Boostwerks* · 09-15-2007, 11:30 PM

Quote:

Originally Posted by HiProfile

Do you guys know how much easier it would be to make a divided bottom mount if you actually used that space you still have between your hood and manifold? You can have that manifold sticking up much further than you might think before it comes too close where engine movement will make it hit, or that 1/2" of insulation wouldn't be enough.

lol. Depends which chassis your talking about.

I defintly can't go all that high with my CRX before the runners start melting things, or the turbo gets so low the oil drain fittings start hitting the ground

I'm sorry if none of this makes sense. I'm pretty wasted right now...lol.

ScorpioMk · 09-16-2007, 03:46 AM

Quote:

Originally Posted by Boostwerks.com

Hrmm...I wonder if that GT37 divided T3 housing could be adapted to the GT30 turbine. I was going to go with the ATP divided housing, but it's only a .78ar. I want a huge A/R to really take advantage of the divided manifold.

if im not mistaken the gt35/37 only come in divided t4, the biggest divided t3 footprint is the 3076.

Marcus

*Boostwerks* · 09-16-2007, 10:21 AM

Quote:

Originally Posted by ScorpioMk

if im not mistaken the gt35/37 only come in divided t4, the biggest divided t3 footprint is the 3076.

Marcus

Nope. you can get the 37 with a large divided T3. It's on garretts website, and you can tell from just looking at the flange of pics posted.

DOHCarp · 09-17-2007, 12:07 PM

Quote:

Originally Posted by Boostwerks.com

Nope. you can get the 37 with a large divided T3. It's on garretts website, and you can tell from just looking at the flange of pics posted.

Boostwerks is right I have a T3 housing that is 1.12 ar and now I just purchased a diffrent T4 housing at .86 ar that is not divided since I will be working on something new I dind't need the divided housing.

as for the GT37 housing fitting on a GT30 not to sure if that would work...it can only be mounted in 90 degree incraments and has 4 bolts that hold it to the center cartridge. if i can get a picture I'll through it up.

FPV_GTp · 10-19-2007, 04:45 PM

very nice collector indeed

cheers

*Boostwerks* · 10-19-2007, 05:09 PM

Quote:

Originally Posted by FPV_GTp

very nice collector indeed

cheers

Thanks! Heres pics of the almost finished manifold. You'll notice it's somewhat like the AFI version, but my flange position is different and allows the manifold too fit into a CRX/EF chassis.

09-14-2007, 05:33 PM	#2
.RTErnie Member Join Date: May 2002 Location: BeLlInGhAm, Wa Posts: 3,572	Re: Divided Collector other than a Topmount Manifold? (BuBBa y0!) I'll do it an make the new bandwagon. __________________ Eric Urness R/TErnie Race Engineering 541.980.6022 SRT-4 and Neon Turbo Manifolds, Tuning, and Fabrication!

09-14-2007, 05:36 PM	#3
tepid1 Member Join Date: Sep 2003 Location: back in CT Posts: 5,135	Re: Divided Collector other than a Topmount Manifold? (.RTErnie) Jesse and Andy @ AFI made several a few months ago.... and they were divided That bandwagon has already been started. __________________ Stewart Race Engines / RLZ ENGINEering / T1 Race Development / Speed Trapp Consulting Arizona Forced Induction / Hasport / NRG-Tech / Bullhead Gears / Canton Racing Products

09-14-2007, 05:39 PM	#4
.RTErnie Member Join Date: May 2002 Location: BeLlInGhAm, Wa Posts: 3,572	Re: Divided Collector other than a Topmount Manifold? (tepid1) too bad nobody's on their bandwagon...mine's the new rave. __________________ Eric Urness R/TErnie Race Engineering 541.980.6022 SRT-4 and Neon Turbo Manifolds, Tuning, and Fabrication!

09-14-2007, 07:29 PM	#5
DaveF Senior Member Join Date: Apr 2001 Location: badattitudeville,PA. GFYS Posts: 16,307	Re: Divided Collector other than a Topmount Manifold? (.RTErnie) Ernie, didnt your sig just say "europe" a few days ago ? lol here is an old revhard manifold Modified by DaveF at 10:09 AM 9/15/2007 __________________ Hotrod civic forsale ** buy my streetcar

09-15-2007, 05:31 AM	#6
tepid1 Member Join Date: Sep 2003 Location: back in CT Posts: 5,135	Re: Divided Collector other than a Topmount Manifold? (DaveF) AFI "bottom mount" __________________ Stewart Race Engines / RLZ ENGINEering / T1 Race Development / Speed Trapp Consulting Arizona Forced Induction / Hasport / NRG-Tech / Bullhead Gears / Canton Racing Products

09-15-2007, 06:38 AM	#7
cluelessmale Member Join Date: Feb 2003 Location: PA, USA Posts: 1,307	Re: Divided Collector other than a Topmount Manifold? (tepid1) sexy __________________ 94 DC4 (Daily) Stickers add HP 95 Turbo DC2 (Drag) one day it will be back on the road again 85 Red Devil (Autocross) 122FM

09-15-2007, 06:46 AM	#8
tepid1 Member Join Date: Sep 2003 Location: back in CT Posts: 5,135	Re: Divided Collector other than a Topmount Manifold? (cluelessmale) __________________ Stewart Race Engines / RLZ ENGINEering / T1 Race Development / Speed Trapp Consulting Arizona Forced Induction / Hasport / NRG-Tech / Bullhead Gears / Canton Racing Products

09-15-2007, 07:55 AM	#9
93CX Member Join Date: Mar 2003 Location: Barren Wasteland of Maine Posts: 3,667	Re: Divided Collector other than a Topmount Manifold? (tepid1) AFI Great looking stuff __________________ 1993 Honda Cx Hatchback B16A @ 7psi - Meyagi Tuned - SpoolinPerformance.com 1999 Honda Si Coupe

09-15-2007, 08:30 AM	#10
Boostwerks Member Join Date: Feb 2002 Location: I heart tool, US Posts: 9,355	Heres the start of my personal divided bottom mount. It'll be able to fit in a CRX chassis, and will be fully polished. __________________ Boostwerks Time Attack CRX coming soon! www.Boostwerks.com Thanks to: Special Projects Motorsports, Servion Tuning, Cortek Inc, (Your name here!)

09-15-2007, 09:14 AM	#11
DOHCarp Junior Member Join Date: Nov 2001 Location: NEPA, PA, U.S. Posts: 845	Re: Divided Collector other than a Topmount Manifold? (BuBBa y0!) I had one about three years ago made by lovefab. used a GT37 with divided housing 1.12 ar it ran great but had some issues with the car only clean time was a 1/8 mile pass witha 6.8 at 107mph. here are some pics of it. __________________ 11.99 @ 112.75 MPH LS/Vtec/turbo (Stock block/Stock Head) 93 Octane Hit V-Tec harder in heaven, Hans We miss you bro!

09-15-2007, 09:37 AM	#12
Boostwerks Member Join Date: Feb 2002 Location: I heart tool, US Posts: 9,355	damn, lol. Cody definetly over complicated that one. __________________ Boostwerks Time Attack CRX coming soon! www.Boostwerks.com Thanks to: Special Projects Motorsports, Servion Tuning, Cortek Inc, (Your name here!)

09-15-2007, 10:03 AM	#13
SwappedTURBOegg Member Join Date: Feb 2004 Location: here, usa Posts: 1,720	haha thats crazy looking. __________________ 11.00@134.68

09-15-2007, 11:47 AM	#16
EARLdaSQUIRREL official honda whore 1994 Acura Integra Join Date: Nov 2002 Location: not tellin you where, pa, usa Posts: 7,675	Re: Divided Collector other than a Topmount Manifold? (DOHCarp) i remember seeing this manifold at redshift back in like 2003 or so __________________ IMW:speed-theory:j-k-tuning:thmotorsports.com my "h-t" build thread 09/10 http://hondamarketplace.com/showthread.php?t=2612869

09-15-2007, 11:51 AM	#17
Boostwerks Member Join Date: Feb 2002 Location: I heart tool, US Posts: 9,355	Hrmm...I wonder if that GT37 divided T3 housing could be adapted to the GT30 turbine. I was going to go with the ATP divided housing, but it's only a .78ar. I want a huge A/R to really take advantage of the divided manifold. __________________ Boostwerks Time Attack CRX coming soon! www.Boostwerks.com Thanks to: Special Projects Motorsports, Servion Tuning, Cortek Inc, (Your name here!)

09-15-2007, 03:40 PM	#18
BuBBa y0! Junior Member Join Date: Jun 2003 Location: SoCaL Posts: 537	Re: Divided Collector other than a Topmount Manifold? (BuBBa y0!) how did they perform? any numbers? __________________ MySpace y0!

09-15-2007, 11:23 PM	#19
HiProfile Member Join Date: Jan 2005 Location: b00sting my D16s, SoWis, USA Posts: 6,209	Re: Divided Collector other than a Topmount Manifold? (BuBBa y0!) Do you guys know how much easier it would be to make a divided bottom mount if you actually used that space you still have between your hood and manifold? You can have that manifold sticking up much further than you might think before it comes too close where engine movement will make it hit, or that 1/2" of insulation wouldn't be enough. __________________ 1994 Del Slow VTEC - OEM B16A3 - winter beater 1995 Civic EX coupe - turbo D16Z6 - summer beater 1967 Firebird 326 H.O. - SMC 350ci - needs a bigger cam, or turbo...

10-19-2007, 04:45 PM	#24
FPV_GTp Junior Member Join Date: Sep 2007 Location: Melbourne, Victoria, Australia Posts: 58	Re: (Boostwerks.com) very nice collector indeed cheers __________________ For Sale - Engine Dynamometer Heenan&Froude G490EH 1500Bhp@15000rpm

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search