Honda and Acura Model Specific Forums

jddwls · 10-14-2007, 08:04 AM

Quote:

Originally Posted by 661rex89si

lest see a review of someone that has these.

bump again for a review. . . .

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

sasinorm01 · 10-14-2007, 06:57 PM

i thought that the speedo sensor was different from cable to hydro...does the conversion kit use the ef speedo cable

NastyHabitzCRX · 10-15-2007, 12:57 AM

Quote:

Originally Posted by sasinorm01

i thought that the speedo sensor was different from cable to hydro...does the conversion kit use the ef speedo cable

i don't see why it wouldn't, i am using a 92-95 speed sensor on my cable trans just fine.

sasinorm01 · 10-16-2007, 12:55 AM

well i have a z6 in my ef with a 91 si tranny..i was told i couldnt use the 92-95 tranny because its hydro and the speedo sensor is different so i gave away my tranny !

VTi_b0i · 01-11-2008, 01:23 AM

call this an extremely n00b question, but if i bought the hydro conversion for a D series motor, then i upgraded to a B series motor, would i then need to get another hydro conversion for that?

keithg · 01-11-2008, 09:06 PM

Quote:

Originally Posted by sasinorm01

well i have a z6 in my ef with a 91 si tranny..i was told i couldnt use the 92-95 tranny because its hydro and the speedo sensor is different so i gave away my tranny !

AFAIK the speed sensors will interchange from the different years and series too. D-series, B-series, H/F-series, they all can be swapped out as needed.

Arthas · 01-11-2008, 09:09 PM

would that be a good company to buy from, iv been looking for some for my car but im hearing good and bad things about different ones

keithg · 01-11-2008, 09:12 PM

Quote:

Originally Posted by VTi_b0i

call this an extremely n00b question, but if i bought the hydro conversion for a D series motor, then i upgraded to a B series motor, would i then need to get another hydro conversion for that?

The "cable to hydro" part could be re-used but the motor mounts and the small steel bracket that holds the cable to the trans are different between the D and B series engines/trans.

JapJunkie · 01-11-2008, 09:43 PM

VTi_b0i · 01-12-2008, 12:57 AM

thanks mate

Vince64 · 01-12-2008, 06:11 AM

i'll throw down a review

After installing a custom full race traction bar that eliminated the stock front crossmember mount i began to feel my engine and tranny rocking quite a bit.

Scrapped up some cash and bought the 70s. A breeze to install, well if you have the right tools for the rear mount. I expected alot more vibration to be honest. I can "feel" the engine more but there isnt any hint of unbearable vibrations or rattling.

Even without the stock front mount those hasports hold the engine nice and tight. I do plan to add a solid adjustable front mount using some heims and threaded rod later on. Gotta be gangsta

eL_cArLos · 01-12-2008, 03:24 PM

vtecn8ive · 01-31-2008, 07:19 PM

Now to sound like a nOOb and i'm sure somebody already asked but I dont' have the best internet connection in Afghan land.

But this cancels out the front engine mount correct? I'm assuming it holds up fine like your b-series mounts?

Thanks,
Shane

keithg · 01-31-2008, 08:20 PM

Quote:

Originally Posted by vtecn8ive

But this cancels out the front engine mount correct? I'm assuming it holds up fine like your b-series mounts?

Thanks,
Shane

The stock front mount will work with the Hasport D-series replacement mounts. You can re-use it if you want to, or not.

Keith Gillespie
Hasport Performance

Modified by keithg at 4:17 PM 2/1/2008

vtecn8ive · 02-01-2008, 01:45 PM

Quote:

Originally Posted by keithg

The stock front mount will work with the Hasport D-series replacement mounts. You can re-use it if you want to, or not.

Keith Gillespie
Hasport Performance

Thanks Keith.

Is it recommended to use it?

Thanks,
Shane

superhatchbackbros · 02-03-2008, 10:18 PM

I just ordered a set of these for my boosted 89 hatch. i cant wait to get them in and installed

im soo happy u finally made stock oem billet mounts for the ef

turbodan · 03-16-2008, 08:52 AM

nice let us know how it goes

superhatchbackbros · 03-18-2008, 10:26 PM

easy install and such a great product hasport mounts FTW hold my engine stiff without the front tranny mount

saikouEF8 · 03-19-2008, 06:25 AM

Quote:

Originally Posted by superhatchbackbros

easy install and such a great product hasport mounts FTW hold my engine stiff without the front tranny mount

got pics of your setup?

superhatchbackbros · 03-28-2008, 02:05 PM

ya i do, but not really tryin to show it lol

siR90hatch221 · 12-17-2008, 09:45 AM

Thanks alot

10-14-2007, 06:57 PM	#77
sasinorm01 Junior Member Join Date: Jul 2004 Location: pembroke pines, florida, usa Posts: 338	Re: (Bob_760) i thought that the speedo sensor was different from cable to hydro...does the conversion kit use the ef speedo cable

01-11-2008, 01:23 AM	#80
VTi_b0i Junior Member Join Date: Feb 2007 Location: Western Sydney, NSW, Australia Posts: 192	call this an extremely n00b question, but if i bought the hydro conversion for a D series motor, then i upgraded to a B series motor, would i then need to get another hydro conversion for that? __________________ Power Of Dreams VTECN

01-11-2008, 09:43 PM	#84
JapJunkie Senior Member Join Date: Aug 2003 Location: So Cal 661 Posts: 10,706	Re: New EF products from Hasport - hydro conversion & stock replacement mounts (brian g) __________________ The '89 Civic Si Build-up! EF EG EK DA DC PARTS 4 SALE!Quote, originally posted by ray-ban* "Bump for a great seller and a honda specialist"*

01-12-2008, 12:57 AM	#85
VTi_b0i Junior Member Join Date: Feb 2007 Location: Western Sydney, NSW, Australia Posts: 192	thanks mate __________________ Power Of Dreams VTECN

01-12-2008, 06:11 AM	#86
Vince64 Junior Member Join Date: May 2007 Location: the backshop, az, usa Posts: 94	Re: (VTi_b0i) i'll throw down a review After installing a custom full race traction bar that eliminated the stock front crossmember mount i began to feel my engine and tranny rocking quite a bit. Scrapped up some cash and bought the 70s. A breeze to install, well if you have the right tools for the rear mount. I expected alot more vibration to be honest. I can "feel" the engine more but there isnt any hint of unbearable vibrations or rattling. Even without the stock front mount those hasports hold the engine nice and tight. I do plan to add a solid adjustable front mount using some heims and threaded rod later on. Gotta be gangsta __________________ http://www.full-race.com http://www.ecomodder.com 70 mpg or die

10-16-2007, 12:55 AM	#79
sasinorm01 Junior Member Join Date: Jul 2004 Location: pembroke pines, florida, usa Posts: 338	well i have a z6 in my ef with a 91 si tranny..i was told i couldnt use the 92-95 tranny because its hydro and the speedo sensor is different so i gave away my tranny !

01-12-2008, 03:24 PM	#87
eL_cArLos Member Join Date: Aug 2003 Location: Reno, NV, USA Posts: 2,041	Re: (Vince64) __________________ WTB: SUPER ADVAN SA3R CENTER CAP RINGS

01-31-2008, 07:19 PM	#88
vtecn8ive Member Join Date: Feb 2004 Location: Houston and Minneapolis, TX/MN, USA Posts: 4,169	Re: (eL_cArLos) Now to sound like a nOOb and i'm sure somebody already asked but I dont' have the best internet connection in Afghan land. But this cancels out the front engine mount correct? I'm assuming it holds up fine like your b-series mounts? Thanks, Shane __________________ 91 Civic Ex stock (automatic) 91 Civic Rt4wd .... (fixing) 90 Crx HF stock Vouches

02-03-2008, 10:18 PM	#91
superhatchbackbros Member Join Date: Jan 2005 Location: PHILLY PA / TRENTON NJ Posts: 1,046	I just ordered a set of these for my boosted 89 hatch. i cant wait to get them in and installed im soo happy u finally made stock oem billet mounts for the ef

03-16-2008, 08:52 AM	#92
turbodan Junior Member Join Date: Jan 2007 Location: miami, Florida, usa Posts: 27	Re: (superhatchbackbros) nice let us know how it goes

03-18-2008, 10:26 PM	#93
superhatchbackbros Member Join Date: Jan 2005 Location: PHILLY PA / TRENTON NJ Posts: 1,046	easy install and such a great product hasport mounts FTW hold my engine stiff without the front tranny mount

03-28-2008, 02:05 PM	#95
superhatchbackbros Member Join Date: Jan 2005 Location: PHILLY PA / TRENTON NJ Posts: 1,046	ya i do, but not really tryin to show it lol

12-17-2008, 09:45 AM	#96
siR90hatch221 Junior Member Join Date: Dec 2008 Location: Columbus Posts: 16	Thanks alot

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search