► DIY eBay Fog Lights Manuals: DOWNLOAD HERE

[gatrhumpy]

HELP! I finallly got the fog lighs to work, but only after ripping out a pin from the switch (a red wire) and touching it to the yellow wire. You can see it from the picture below: As you can see in the first picture, the far red wire is disconnected from the switch. Even when I connect it to its proper socket, the fog lights will not illuminate when the lights are on or when the switch is pressed. The relay will not work either. When the red wire is connected (touched) to the yellow wire, the relay works (to my surprise) and the fog lights come on. How do I get the damn switch to work properly and for the fog lights to come on when the lights come on? Here are some other pictures:

This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Honda-Tech!

[ken9]

My fog light will never work. I think it might be defective or something..

[gatrhumpy]

No one can help me?

[redb16coupe]

Originally Posted by gatrhumpy

No one can help me?

the 4 pin plug that goes to the fuse box in your 6th picture... move the cable over from the far right to the far left that should fix your problem hope it helps

[gatrhumpy]

Originally Posted by redb16coupe

the 4 pin plug that goes to the fuse box in your 6th picture... move the cable over from the far right to the far left that should fix your problem hope it helps

Nope. No luck. If I did that, there is no pin there to connect to inside the fuse box, meaning there are only three prongs inside that fuse box, pins 2, 3, and 4 are present, but not 1.

[hcex01]

Wow, reading this whole thread makes my head hurt, what a cluster f.
I think I'll just pass on the fogs.

[redb16coupe]

Originally Posted by gatrhumpy

Nope. No luck. If I did that, there is no pin there to connect to inside the fuse box, meaning there are only three prongs inside that fuse box, pins 2, 3, and 4 are present, but not 1.

Ok then grab a testlight and check which pin has power when your light switch is on. One of them is bound to. If not look up online to see what cable under there is for your parking lights. Any one with access to an alarm manual or diagram for that car can tell you I'm on my iPhone and can't look up the website I have. Hope that helps lmk

[katzenjammer84]

OEM or dont bother.

[DynastyRacer22]

why dont you just hardwire it to your lights or your headlight switch? i wired mines up the way its supose to but i leave the button pushed in so it turns on whenever i turn on my headlights..plus the ebay switch sucks anyways it stays stuck in there lol

[gatrhumpy]

Originally Posted by DynastyRacer22

why dont you just hardwire it to your lights or your headlight switch? i wired mines up the way its supose to but i leave the button pushed in so it turns on whenever i turn on my headlights..plus the ebay switch sucks anyways it stays stuck in there lol

I beleive that is what I did. I connected the broken red wire to the yellow wire, and now the fog lights work when I turn on the low or hi beams. Of course, the switch does not work. They only come on when the lights come on. Oh, and the one wire coming out of the fuse tap? That wire was correct (the way I have it now, aka all the way on pin 4, to the right).