Honda Civic / Del Sol (1992 - 2000) EG/EH/EJ/EK/EM1 Discussion

94 EG Hatch...compatible parts w/ 96 Integra?

Thread Tools
 
Search this Thread
 
Old 04-19-2007, 07:29 PM
  #1  
Honda-Tech Member
Thread Starter
 
turboteg2nv's Avatar
 
Join Date: Jan 2004
Location: Cincinnati, OH
Posts: 2,792
Likes: 0
Received 0 Likes on 0 Posts
Default 94 EG Hatch...compatible parts w/ 96 Integra?

Sup guys,

I'm about to sell my beloved 1996 Integra LS for a 1994 white hatch. Not sure exactly what trim it is, but it has manual windows/locks, a/c, maybe power steering? Sorry I'm new to Civics, but I can tell you every damn spec about Integra's from paint codes to models and trim, lol. Help me out guys, give me the heads up on this model.

I'm going to look at the car on Saturday, but I'm guessing it has rear drums for brakes, shitty 14" wheels, etc. What I'm wondering is what parts can I pull from my Integra that swap onto the Civic?

I'm pretty sure these parts I have will work:
-Sparco seat with 96-00 integra bracket (92-95 Civic)
-Neuspeed strut/tie bars?
-Tokico blue shocks?
-Progress camber kit? Not sure on this one

Other than that, my Integra is boosted and will be fully returned to stock before some unsuspecting bafoon purchases it. I'm not sure if the Civic will be my next big project car or just a daily driver; I'm in my last year of college and broke as ****...so I might have to hold off for a while until I get my feet on the ground. IF I DO BUILD IT...it's going to be a built K-series with a GT30r turbo.

Also..the car itself: 1994 Civic hatch, adult owned/dealer maintained, has 230k on it, garage kept, T-belt/water pump/clutch replaced at 165k, mostly highway miles, one spot of rust on rear fender (typical), owner changes oil himself using Synthetic oil, doesn't burn any oil (according to him) Kelly Blue Book has it estimated at $2,285 for good condition. The guy is looking for $1850 but I plan on negotiating down to $1500. Think it's a deal? / I'll be armed with my compression tester and looking for oil leaks, checking suspension, brakes, etc. I know what to look for.

I fully appreciate any comments/suggestions you guys may have. Thanks for reading my long *** post!! I'm excited, what can I say. I've had my Integra since I was 16, now I'm 22 and still driving the damn thing.
Old 04-19-2007, 07:30 PM
  #2  
Honda-Tech Member
 
dannis.'s Avatar
 
Join Date: Mar 2007
Location: Weaksauce, UT
Posts: 395
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 94 EG Hatch...compatible parts w/ 96 Integra? (turboteg2nv)

yup all those parts you listed will work fine.
Old 04-19-2007, 07:43 PM
  #3  
Honda-Tech Member
Thread Starter
 
turboteg2nv's Avatar
 
Join Date: Jan 2004
Location: Cincinnati, OH
Posts: 2,792
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 94 EG Hatch...compatible parts w/ 96 Integra? (DannisEG6)

**** what else do I have...

-22mm USDM Type R rear sway bar?
-B&M short shifter?

Most of my turbo setup will be compatible, minus the exhaust manifold (duhhh!!). I'm nervous about boosting a motor with 230k on it, I got lucky boosting my Integra with 130k on it lol. But it's a D-series, who gives an EFF right?? haha
Old 04-19-2007, 07:47 PM
  #4  
Honda-Tech Member
 
schardbody's Avatar
 
Join Date: Jan 2006
Location: Ladson, sc, US
Posts: 4,338
Likes: 0
Received 2 Likes on 2 Posts
Default

ANY suspension part will fit, as well as brake parts. umm, a few other obvious stuff.

Old 04-19-2007, 07:49 PM
  #5  
Honda-Tech Member
 
dannis.'s Avatar
 
Join Date: Mar 2007
Location: Weaksauce, UT
Posts: 395
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 94 EG Hatch...compatible parts w/ 96 Integra? (turboteg2nv)

im pretty sure the short shifter will fit and the sway bar should fit but im not 100% sure. and hahaha yeah and its only a d so eff it!
Old 04-19-2007, 08:12 PM
  #6  
Member
 
shrums-EG6's Avatar
 
Join Date: Feb 2006
Location: lost in cali, usa
Posts: 1,659
Likes: 0
Received 0 Likes on 0 Posts
Default

the short shifter wont but you can make it fit. i dont remember why but it doesnt. breaks and a few other parts will.
Old 04-19-2007, 08:13 PM
  #7  
Honda-Tech Member
 
schardbody's Avatar
 
Join Date: Jan 2006
Location: Ladson, sc, US
Posts: 4,338
Likes: 0
Received 2 Likes on 2 Posts
Default Re: (shrums)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shrums &raquo;</TD></TR><TR><TD CLASS="quote">the short shifter wont but you can make it fit. i dont remember why but it doesnt. breaks and a few other parts will.</TD></TR></TABLE>

short shifter will, all 90-00 civic and 90-01 integras are the same.
Old 04-19-2007, 08:18 PM
  #8  
Honda-Tech Member
Thread Starter
 
turboteg2nv's Avatar
 
Join Date: Jan 2004
Location: Cincinnati, OH
Posts: 2,792
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (schardbody)

I'm not even sure if I'll be messing with this car yet, but I know for sure I'll strip my Integra and have all the aftermarket parts to sell/use.

What about the car I'm looking to buy? Think it's a fair price?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vche101
For Sale
8
08-21-2009 04:01 AM
zad5
Northern California (Sales)
3
01-02-2007 07:47 PM
Scotty Dosent Know
Suspension & Brakes
2
06-22-2006 09:43 AM
fluke83
Acura Integra
2
09-13-2005 03:33 PM
electron-eg
Honda Civic / Del Sol (1992 - 2000)
1
04-22-2005 08:02 PM



Quick Reply: 94 EG Hatch...compatible parts w/ 96 Integra?



All times are GMT -8. The time now is 12:06 PM.