Honda and Acura Model Specific Forums

red-teg! · 03-07-2007, 09:59 AM

What wires need to be added to the wiring harness for LS/vtec to work, the wiring is a OBD0 B18b i think theres 3 wires to add but im not quite sure. thanks

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

s2kdre · 03-07-2007, 10:51 AM

the knock sensor and vtec selinoid and ground.

GRAF-FITI · 03-07-2007, 12:11 PM

check this out, read about 3 quarters of the way down the page:

http://g2ic.com/tegtips/engine/b16aswap.doc

red-teg! · 03-07-2007, 12:17 PM

sweet thanks for the help

03-07-2007, 10:51 AM	#2
s2kdre Member Join Date: Sep 2003 Location: orlando florida, usa Posts: 2,412	Re: Wiring LS/vtec (red-teg!) the knock sensor and vtec selinoid and ground.

03-07-2007, 12:11 PM	#3
GRAF-FITI * B A N N E D * Join Date: Aug 2006 Location: states united Posts: 6,245	Re: Wiring LS/vtec (s2kdre) check this out, read about 3 quarters of the way down the page: http://g2ic.com/tegtips/engine/b16aswap.doc

03-07-2007, 12:17 PM	#4
red-teg! Join Date: Mar 2007 Posts: 15	Re: Wiring LS/vtec (GRAF-FITI) sweet thanks for the help

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search