project eg6 rhd conversion and full engbay shave with wire tuck
#183
Member
Join Date: Jun 2005
Location: billings, montana
Posts: 1,828
Likes: 0
Received 0 Likes
on
0 Posts
Re: (twistedimage)
https://honda-tech.com/zerothread?id=2119693
check it out. it was alot of fun last year, but to many subarus we need to get the honda count up since it started on a honda fourm. cant wait to see ur car finished!!!!!! looks great!!!
check it out. it was alot of fun last year, but to many subarus we need to get the honda count up since it started on a honda fourm. cant wait to see ur car finished!!!!!! looks great!!!
#192
Honda-Tech Member
Thread Starter
Re: (twistedimage)
alright time for more up dates. i have not been doing to much because it is cold. and snowing out.
today started out with this
got the fuse box and battery hold down pulled
just getting ready to pull the prop valve.
a look at it before i pull the pedal assembleys and rest of the heater core.
a look at the new toy i got for this madness
new front and rear bumpers
got the dash in the rafters of the garage. lol
threw the steering colum on the wall for now.
just getting ready to pull the brake booster and the clutch master.
i really hate pulling the heater box out. and for the noobs dont forget to pull this 12mm nut off. is on the outside right by where the heater hoses go into the fire wall
here is a look at it.
a look at it from the inside of te car
a pic to show the cotter key you need to pull to get the pin out. so you can take out the clutch master cyl
got the booster and the clutch master out.
got the pedal assembleys out
i think that this is about 10 pounds of sound proofing.
now that that is out of the way. time to pull the wire harness.
got it out and it filled up this tub.
a look at it all out.
time to get the suspension out. like my jack stands?
a better shoot of the jack stands!!!! lol
got the sub frame down
and out of the car clip
time to get the rest of the hard lines out.
got the struts chillin
put the hubs in the corner
and where i am at the end of the day. need to start drilling out welds..
so leave me some feedback guys thanks.
its the builds i find on h-t that inspire me to do mine. i hope you guys like it..
thanks
today started out with this
got the fuse box and battery hold down pulled
just getting ready to pull the prop valve.
a look at it before i pull the pedal assembleys and rest of the heater core.
a look at the new toy i got for this madness
new front and rear bumpers
got the dash in the rafters of the garage. lol
threw the steering colum on the wall for now.
just getting ready to pull the brake booster and the clutch master.
i really hate pulling the heater box out. and for the noobs dont forget to pull this 12mm nut off. is on the outside right by where the heater hoses go into the fire wall
here is a look at it.
a look at it from the inside of te car
a pic to show the cotter key you need to pull to get the pin out. so you can take out the clutch master cyl
got the booster and the clutch master out.
got the pedal assembleys out
i think that this is about 10 pounds of sound proofing.
now that that is out of the way. time to pull the wire harness.
got it out and it filled up this tub.
a look at it all out.
time to get the suspension out. like my jack stands?
a better shoot of the jack stands!!!! lol
got the sub frame down
and out of the car clip
time to get the rest of the hard lines out.
got the struts chillin
put the hubs in the corner
and where i am at the end of the day. need to start drilling out welds..
so leave me some feedback guys thanks.
its the builds i find on h-t that inspire me to do mine. i hope you guys like it..
thanks
#194
Member
Join Date: Jan 2003
Location: Minneapolis, MN
Posts: 2,202
Likes: 0
Received 0 Likes
on
0 Posts
Wyo in the house, Son... Go Pokes!!!
My best homey is from Thermopolis up North - we hit up Laramie for Pokes homecoming every year. I was just up in October.
Project is looking sick. Shaved bay is going to be off the charts and the RHD will be KILLIN em in Wyoming. Keep doing your thing man.
My best homey is from Thermopolis up North - we hit up Laramie for Pokes homecoming every year. I was just up in October.
Project is looking sick. Shaved bay is going to be off the charts and the RHD will be KILLIN em in Wyoming. Keep doing your thing man.
#197
Honda-Tech Member
Join Date: Sep 2004
Location: Windchestertonfieldville, NJ, USA
Posts: 1,555
Likes: 0
Received 0 Likes
on
0 Posts
Re: (twistedimage)
goodluck to you bro
this is the only project that requires alot of ***** from a honda enthusiast, lots can go wrong if your not careful.
heres to you
this is the only project that requires alot of ***** from a honda enthusiast, lots can go wrong if your not careful.
heres to you