Honda and Acura Model Specific Forums

black_bb1 · 11-29-2006, 03:52 PM

soooo hawt

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

nafreak · 11-30-2006, 08:36 AM

Quote:

Originally Posted by DMetal420

My wife just left me after she saw me looking at this thread. WTF?

LOL!!!

roller3804 · 12-06-2006, 02:45 PM

bump for update

Mykizism · 12-11-2006, 05:25 PM

ok updating coming very shortly uploading video as we speak

Setup: (just incase somone of you guys wondered) bc ive never stated in my thread

Block: H22a4
H22A4 Benson Sleeved block 87mm bore
Benson Balanced/Micropolished OEM crank
CP 9:1 (off the shelf) pistons
Pauter rods
ACL bearings
Balance Shafts Removed

H22A4 Head
Supertech SS valves/Springs/ Ti Retainers
Polished exhaust side
Cleaned up intake side
3 Angle Valve Seat cut (Done by Portflow)

Intake
Skunk2 IM
Stock Throttle body
2 inch hotside charge pipe
2.5 coldside intercooler pipe
Type 24 Greddy intercooler

Exhaust
SFP Turbo Manifold
T3 Precision GT3561e
Tial 38mm Wastegate
2.5 flared to 3inch downpipe with terrible design recirculated wastegate
Custom Full 3inch exhaust with HKS hipower muffler

Fuel
Precision 1000cc injectors
Stock fuel lines/ FPR / Fuelrail
Bosch 044 pump mounted intank
Neptune EMS

Transmission
Stock H22 Tranny (no grinds)

with a Quaife LSD
Exedy Stage 2, 3-puck cerametallic racing clutch and pressure plate
x-ACT 12lb lighten flywheel

Suspension / Brakes
Ksports Coilovers Custom spec
Revalved shock bodies paired with:
13k Springs Front
9k Springs Rear
Acura Legend 2 pot calipers with brembo blanks
Axxis Ultimate pads Front / Rear
S2000 Steering wheel

pics of the car

Dynoed at 360whp @ 16-17 psi on 93 octane pump gas. So far (graph says 350whp but its SAE corrected), me and jason (st00pid) were kinda disappointed in the numbers because I estimated low 400's, jason estimated high 400's, and i didnt even break 400. LOL i think the power culprit is the downpipe and the badly designed recirculated wastegate. I am currently designing a new downpipe, going to be full 3inch with a better placed wastegate. I guess its not bad for a first timer fabricator/designer.. LOL

Link to the video dyno:

try that link to the video let me know if it works or doesnt.. thanks for viewing enjoy

I`d like to give special thanks to Earl Laskey =/ : you gave me a lot of your time giving me advice about motor building in the past motors and I'm very greatful for that. Along with all the parts I bought from you. I wanted to finish this car and linked you what I built with the knowledge you have given me. I wanted to show you so I could make you proud. Thanks very much for everything Earl you were a father figure to me.

more special thanks to:
My Girlfriend Gina.. for understanding my devotion for this car and always being there

.
BooST-i (Jimmy) for always just hanging out in my garage with me and helping me put the motor in
GarageparkS2K (Lam) for talking smack to me and getting banned! and hanging out
Precisionh23a of A/V Engineered for giving me some advice even though I know you're a pretty busy guy.
Tony1 of T1 Racing for talking to me thru PM's when im at work b/c Im bored lol.
St00pid of St00pidFAST for the great tune job!

Thanks guys for all your support!!

Modified by Mykizism at 10:58 PM 12/12/2006

98vtec · 12-11-2006, 05:26 PM

its weak.

Mykizism · 12-11-2006, 06:06 PM

video uploaded

zero1typeS · 12-11-2006, 06:10 PM

I bet it was a blast driving home. looking forward to the vid
IM sent

Shakes · 12-11-2006, 06:44 PM

You suck

K-Spec · 12-12-2006, 01:21 AM

what tire size are you running and how big are those rims?

Mykizism · 12-12-2006, 07:30 AM

Quote:

Originally Posted by K-Spec

what tire size are you running and how big are those rims?

those are 18x7.5 225/40/18

Quote:

Originally Posted by nyluder

Good job, guys. Very nice engine setup.

thanks! only its guy it was just me in my garage at my house, lol did all the work

pprowler6 · 12-12-2006, 08:38 AM

regardless of what you think of the numbers....that car is a fine piece of art and should be placed in a muesum!

trowa · 12-12-2006, 08:52 AM

Sweet car dude. its falcon.

0h teh sl0w k20!! · 12-12-2006, 03:59 PM

two words.. ****in beast

prelude785 · 12-12-2006, 04:27 PM

Sick setup dude, come out to the meet on 17th at Bear Creek on Clay rd. BTW, this is the dude that bought your GC's a while back.

I think Marty is coming too.

md23vtec · 12-12-2006, 04:38 PM

Fix that dumptube and re-dyno

I still say atmosphere

Mykizism · 12-12-2006, 05:00 PM

Quote:

Originally Posted by prelude785

Sick setup dude, come out to the meet on 17th at Bear Creek on Clay rd. BTW, this is the dude that bought your GC's a while back.

I think Marty is coming too.

sup man, i might go if i dont have anything else to do.. lalit right?

Quote:

Originally Posted by md23vtec

Fix that dumptube and re-dyno I still say atmosphere

man.. everyone is telling me to go open.. is really loud or what? i want a quiet car lol

md23vtec · 12-12-2006, 05:13 PM

Quote:

Originally Posted by Mykizism

man.. everyone is telling me to go open.. is really loud or what? i want a quiet car lol

Whats ur definition of loud

. IMO It not that big of a difference untill your beating on it honestly.

ninja 6 · 12-12-2006, 05:16 PM

I hate you

md23vtec · 12-12-2006, 05:20 PM

Quote:

Originally Posted by ap

I hate you

I dunno why

but I should have my own Hate fanclub you can be member # 1,299,400,441

ninja 6 · 12-12-2006, 05:22 PM

Oh I was just kidding towards the OP.

What kind of paint did you use for the valve cover?

Mykizism · 12-12-2006, 05:26 PM

Quote:

Originally Posted by ap

Oh I was just kidding towards the OP.

What kind of paint did you use for the valve cover?

LOL, you can be hater #0000001 :D

i used PPG deltron line of paint.. oem premium pearl white, with ppg clear.. so it matches the color of my car

md23vtec · 12-12-2006, 06:26 PM

Now was that loud

Mykizism · 12-12-2006, 06:30 PM

Quote:

Originally Posted by md23vtec

Now was that loud

YES VERY!

prelude785 · 12-12-2006, 07:35 PM

heh yea, a lot of us from HPC are gonna roll together. lemme know if you wanna roll with us.

Quote:

Originally Posted by Mykizism

sup man, i might go if i dont have anything else to do.. lalit right?

Prudz_lude · 12-12-2006, 08:04 PM

great car and awesome build. loved the anticipation of seeing what would come next during the build. Hope you get those numbers a little higher but still 350whp on a lude is hella fast on the street.

12-06-2006, 02:45 PM	#203
roller3804 Junior Member Join Date: Oct 2005 Location: Fort Worth, TX Posts: 803	Re: (nafreak) bump for update __________________ 1994 Prelude VTEC JDM H22a Boost in progress

12-11-2006, 05:25 PM	#204
Mykizism Member Join Date: Sep 2002 Location: Garage Park, htx Posts: 1,573	Re: (roller3804) ok updating coming very shortly uploading video as we speak Setup: (just incase somone of you guys wondered) bc ive never stated in my thread Block: H22a4 H22A4 Benson Sleeved block 87mm bore Benson Balanced/Micropolished OEM crank CP 9:1 (off the shelf) pistons Pauter rods ACL bearings Balance Shafts Removed H22A4 Head Supertech SS valves/Springs/ Ti Retainers Polished exhaust side Cleaned up intake side 3 Angle Valve Seat cut (Done by Portflow) Intake Skunk2 IM Stock Throttle body 2 inch hotside charge pipe 2.5 coldside intercooler pipe Type 24 Greddy intercooler Exhaust SFP Turbo Manifold T3 Precision GT3561e Tial 38mm Wastegate 2.5 flared to 3inch downpipe with terrible design recirculated wastegate Custom Full 3inch exhaust with HKS hipower muffler Fuel Precision 1000cc injectors Stock fuel lines/ FPR / Fuelrail Bosch 044 pump mounted intank Neptune EMS Transmission Stock H22 Tranny (no grinds) with a Quaife LSD Exedy Stage 2, 3-puck cerametallic racing clutch and pressure plate x-ACT 12lb lighten flywheel Suspension / Brakes Ksports Coilovers Custom spec Revalved shock bodies paired with: 13k Springs Front 9k Springs Rear Acura Legend 2 pot calipers with brembo blanks Axxis Ultimate pads Front / Rear S2000 Steering wheel pics of the car Dynoed at 360whp @ 16-17 psi on 93 octane pump gas. So far (graph says 350whp but its SAE corrected), me and jason (st00pid) were kinda disappointed in the numbers because I estimated low 400's, jason estimated high 400's, and i didnt even break 400. LOL i think the power culprit is the downpipe and the badly designed recirculated wastegate. I am currently designing a new downpipe, going to be full 3inch with a better placed wastegate. I guess its not bad for a first timer fabricator/designer.. LOL Link to the video dyno: try that link to the video let me know if it works or doesnt.. thanks for viewing enjoy I`d like to give special thanks to Earl Laskey =/ : you gave me a lot of your time giving me advice about motor building in the past motors and I'm very greatful for that. Along with all the parts I bought from you. I wanted to finish this car and linked you what I built with the knowledge you have given me. I wanted to show you so I could make you proud. Thanks very much for everything Earl you were a father figure to me. more special thanks to: My Girlfriend Gina.. for understanding my devotion for this car and always being there . BooST-i (Jimmy) for always just hanging out in my garage with me and helping me put the motor in GarageparkS2K (Lam) for talking smack to me and getting banned! and hanging out Precisionh23a of A/V Engineered for giving me some advice even though I know you're a pretty busy guy. Tony1 of T1 Racing for talking to me thru PM's when im at work b/c Im bored lol. St00pid of St00pidFAST for the great tune job! Thanks guys for all your support!! Modified by Mykizism at 10:58 PM 12/12/2006 __________________ Garage Park 1995 Nissan 240SX 1999 Prelude Turbo 2006 Acura TL - Navigation http://www.honda-tech.com/zerothread/1673078 5th Gen Engine bay shave

12-11-2006, 05:26 PM	#205
98vtec Senior Member Join Date: Oct 2002 Location: RealHomeMadeTurbo Posts: 14,228	Re: (Mykizism) its weak.

12-11-2006, 06:06 PM	#206
Mykizism Member Join Date: Sep 2002 Location: Garage Park, htx Posts: 1,573	Re: (B.Rabbit) video uploaded __________________ Garage Park 1995 Nissan 240SX 1999 Prelude Turbo 2006 Acura TL - Navigation http://www.honda-tech.com/zerothread/1673078 5th Gen Engine bay shave

12-11-2006, 06:10 PM	#207
zero1typeS Junior Member Join Date: Oct 2002 Location: IN YOUR MOM Posts: 178	Re: (Mykizism) I bet it was a blast driving home. looking forward to the vid IM sent __________________ NEED BOOST

12-11-2006, 06:44 PM	#208
Shakes Member Join Date: Nov 2002 Location: Spec Shakesland Posts: 6,086	Re: (zero1typeS) You suck __________________ -Doug SMOKE FREE SINCE 10-31-04 06 Aspen White STi \| 91 CRX HF

12-12-2006, 01:21 AM	#209
K-Spec Junior Member Join Date: Oct 2004 Location: Tucson...Cactus Town, Az, usa Posts: 885	Re: (Mykizism) what tire size are you running and how big are those rims?

12-12-2006, 08:38 AM	#211
pprowler6 Junior Member Join Date: Sep 2005 Location: west chester, pa, usa Posts: 686	Re: (Mykizism) regardless of what you think of the numbers....that car is a fine piece of art and should be placed in a muesum!

12-12-2006, 08:52 AM	#212
trowa Join Date: Dec 2006 Posts: 3	Re: (Mykizism) Sweet car dude. its falcon.

12-12-2006, 03:59 PM	#213
0h teh sl0w k20!! Member Join Date: Apr 2005 Location: Queenz New Yawk Posts: 1,178	Re: (trowa) two words.. **in beast __________________ 04 Sti** b0ost is best!! 2009 Yankees.. Champions Of Ba$eball..

12-12-2006, 04:27 PM	#214
prelude785 Junior Member Join Date: Dec 2005 Location: Houston, Texas, United States Posts: 42	Re: (s0fa_kingfresh!!) Sick setup dude, come out to the meet on 17th at Bear Creek on Clay rd. BTW, this is the dude that bought your GC's a while back. I think Marty is coming too.

12-12-2006, 04:38 PM	#215
md23vtec Member Join Date: Oct 2002 Location: md, us Posts: 2,497	Re: (Mykizism) Fix that dumptube and re-dyno I still say atmosphere __________________ www.ExplicitSpeedPerformance.net www.mandhtires.com www.bullheadgears.com Liked by few hated by many respected by ALL

12-12-2006, 05:16 PM	#218
ninja 6 Member Join Date: Jun 2006 Posts: 2,799	Re: (md23vtec) I hate you __________________ http://is.rely.net/1-92-30010-l-EJ2C...vCHQSpD2EQ.gif

12-12-2006, 05:22 PM	#220
ninja 6 Member Join Date: Jun 2006 Posts: 2,799	Re: (md23vtec) Oh I was just kidding towards the OP. What kind of paint did you use for the valve cover? __________________ http://is.rely.net/1-92-30010-l-EJ2C...vCHQSpD2EQ.gif

12-12-2006, 06:26 PM	#222
md23vtec Member Join Date: Oct 2002 Location: md, us Posts: 2,497	Re: (Mykizism) Now was that loud __________________ www.ExplicitSpeedPerformance.net www.mandhtires.com www.bullheadgears.com Liked by few hated by many respected by ALL

12-12-2006, 08:04 PM	#225
Prudz_lude Member Join Date: Jun 2006 Location: edmonton, ab, canada Posts: 1,758	Re: (prelude785) great car and awesome build. loved the anticipation of seeing what would come next during the build. Hope you get those numbers a little higher but still 350whp on a lude is hella fast on the street. __________________ BB Squad #23 (v.2)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search