Honda and Acura Technical Forums

civic nation · 05-30-2006, 06:33 AM

some nice setups but need more

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

Mr.Death · 05-30-2006, 07:31 AM

d16Z6 stock motor
Edelbrock turbo kit(Gt28R turbo)
Tial BOV
Turbosmart MBC
DSM 450's
Prescision intercooler
Stock Fuel pump/FPR
3" Magnaflow muffler/no resonator
2.5" charge pipes
ZC L3 LSD tranny
Tuned with Techtom by http://www.neetronics.com/neet/
9 lbs boost 212whp daily driven for 2 years

Modified by Mr.Death at 4:48 PM 6/4/2006

LoSt is BlaCk · 05-30-2006, 08:56 AM

you better take car of that new setup santos!!!!

RyanEJ8 · 05-30-2006, 10:01 AM

D16Y8 Block and Head
SRP Pistons with JE Rings approx 10:1 C/R and .020 overbore
Eagle Rods with ARP Rod Bolts
Golden Eagle Block Guard
Stock Crankshaft/Girdle/Oil Pump/Water Pump
Stock Oil Pan
ZEX 105300 Street/Strip Camshaft
ZEX Valve Springs with Stock Retainers
AEM Tru-Time Cam Gear
ARP Head Studs
Stock Valves
ACT Street Disk and Heavy Duty Pressure Plate
Stock Y8 Tranny
Stock Axels
RC 750cc saturated injectors
AEM Fuel Rail/Fuel Filter/FPR
Holley 255lph High Pressure Fuel Pump
Stock Ignition and Wires
Hondata S200
Precision SC50 .48 A/R
Precision AS1025 600hp intercooler
Lovefab SST Manifold
Lovefab Downpipe
Tial 38mm Wastegate
Tial BOV
Greddy Profec B Spec II Boost Controller
SVE 3bar Map Sensor

Best 1/4 Mile Time so far: 13.01 @ 107.5MPH, 14psi

Going back for 12's very soon with the same setup. Just need to get the 60' down alot.

BlackCRX · 05-30-2006, 10:08 AM

stock y8
custom shorty manifold
kkk k26 turbo with stock external wastegate @ 7psi
DSM 450cc injectors
DSM BOV
2.25 downpipe and exh

13.5 on 22inch slicks

aiming for more boost and 12's once i get a new exh/dp setup

D16SohcVtec · 05-30-2006, 10:12 AM

93 DX Hatch
Stock ZC SOHC VTEC
RLD Fab Ramhorn manifold
RLD Fab Dumptube
RLD Fab 3 in DP all the way back to 3 in Tanabe Racing Medallion
DSM 450's
Garrett t3/t4 50 trim .48 ar
2.25 in IC piping
Tial 38mm wastegate
TurboXS boost controller
Walbro 190LPH
Apexi Twin Chamber BOV
JRC FMIC

This is all I can think of right now.

slodel · 05-30-2006, 10:13 AM

1994 honda civic coupe

d16z6 stock block
edelbrock intake manifold
3 inch downpipe
EVO turbo
log mani
intercoooler
dsm bov
b&m fpr
turbo xs boost controller
hondata s200
arp rod bolts
oem head gasket
rc 440s
3 bar map sensor

retuning this week as we speak the first tune was on way to big of a turbo that didnt spoool until 4500 and a shitty fuel pump. RS motors is putting on the new turbo and log mani and retuning this week. Going down friday to pick it up for the first race of the season on Saturday.

Number and Times will be up Sunday

Will be using 22 inch M&H slicks going for 12s

rextec · 05-30-2006, 10:17 AM

i havent put this on the car yet cause im waiting to pass smog first

. planning on running around 16psi on pump gas and hoping for around 300whp. oh yeah all this in a first gen crx

http://honda-tech.com/zerothread?id=1612104.

-d16z6 .20 overbore stock sleeves
-cp 9.1.1 pistons
-eagle rods
-acl bearings
-arp studs
-tial 38mm wg
-bored stock tb
-stock head
-zex 59300 cam
-rc 500cc injectors
-255 lph walbro inline
-thermal IM gasket
-BMC elf mani
-precision gt3251e turbo
-"RFL" bov
-crome
-zeitronix wb
-3.5 bar map

Modified by rextec at 9:09 PM 5/30/2006

Modified by rextec at 9:10 PM 5/30/2006

Modified by rextec at 9:10 PM 5/30/2006

S@nt0s · 05-30-2006, 10:54 AM

Quote:

Originally Posted by LoSt is BlaCk

you better take car of that new setup santos!!!!

more boost to come shortly

SOHC_MShue · 05-30-2006, 11:23 AM

heres my setup:

d16y8 block/z6 head
arp headstuds
zex 59300 cam and valvesprings
hf manifold converted to use a tial 38mm wastegate
small ass wrx turbo on 12psi
greddy profec B spec II
tial 50mm bov
uberdata
dsm 450s
crappy 2.5" downpipe that looks like its been beat up with a steel bat
2.25" press bent piping exhaust.
ran 13.8@103mph in my 98ex coupe with some shitty 60' action.

I did put a sti turbo on it the other week, but the seals went all shitty on me

ladysman · 05-30-2006, 01:19 PM

Check my sig.

SovXietday · 05-30-2006, 01:34 PM

Stock D16Y8 Block and Head
-Jackson Racing Supercharger at 6psi
-DC 4-1 Header
-Stock Cat
-APEXi WSII
-AEM SRI
-Venom Cam Gear
-JR Map Controller

I just got my DSM 450s in the mail and am waiting for my P28. Need to change the header to fit my test pipe. Will be tuned shortly, hoping to see 160whp and 125lb/tq

Right now its 146whp and 118lb/tq. 15.249 @ 92.28 on street tires with full interior.

Aiming for 200whp in the end, then will be switching over to a turbo and going for 450whp+ on the same engine.

igo4bmx · 05-30-2006, 01:38 PM

Quote:

Originally Posted by SovXietday

Stock D16Y8 Block and Head
-Jackson Racing Supercharger at 6psi
-DC 4-1 Header
-Stock Cat
-APEXi WSII
-AEM SRI
-Venom Cam Gear
-JR Map Controller

I just got my DSM 450s in the mail and am waiting for my P28. Need to change the header to fit my test pipe. Will be tuned shortly, hoping to see 160whp and 125lb/tq

Right now its 146whp and 118lb/tq. 15.249 @ 92.28 on street tires with full interior.

Aiming for 200whp in the end, then will be switching over to a turbo and going for 450whp+ on the same engine.

I saw your car dyno at the lansdale, PA meet.
good luck with your future setups!

S@nt0s · 05-30-2006, 02:19 PM

DSM 450's
WalBro intake pump
3 Bar
Chrome getting put on within the next 2 weeks....
lets see what these greddy kits are made of....

JDMCRX · 05-30-2006, 02:25 PM

D16Y8 STOCK
ARP head studs 65ft lbs
STR block Gaurd

REVHARD manifold
TIAL Wastegate
TIAL BOV
Skunk2 Intake
62mm TB
T3T4 .51 comp .48Exh

10psi ran 14.1 at 102mph on street tires. Shitty

S@nt0s · 05-30-2006, 02:32 PM

14.1 nd you were making 255?

wha car is this in?

BlackCRX · 05-30-2006, 02:44 PM

Quote:

Originally Posted by FR-MOB: SnoFlake

14.1 nd you were making 255?

wha car is this in?

his 255whp was made with 11.6psi according to his sig

going by the pic it looks like hes rocking an ek or el ?

S@nt0s · 05-30-2006, 02:49 PM

Quote:

Originally Posted by BlackCRX

his 255whp was made with 11.6psi according to his sig

going by the pic it looks like hes rocking an ek or el ?

i can see that.. was it a coupe or a 4 dr hatch???

blackeg · 05-30-2006, 02:58 PM

old setup of mine that was stolen in 04.

stock z6, 143,000miles
turbonetics log manifold &2.25 dp
t3 50 trim .60/.48
tial 38mm
dsm bov
dsm450's
uberdata
jrc 5inch i/c
act hdss with streetlite flywheel
apex ws catback

i only ran the car on 6-7psi due to a broken chip burner and theft about 3-4 weeks after being completed. i liked it though, it had a nice broad powerband

LaOstha · 05-30-2006, 03:03 PM

anyone having a problem with their car overheating with the small thin ass 92-95 radiators.

S@nt0s · 05-30-2006, 03:06 PM

Quote:

Originally Posted by LaOstha

anyone having a problem with their car overheating with the small thin ass 92-95 radiators.

mine is getting a lil hot but not passed half way.. i nee to get a Del Sol Dual

LaOstha · 05-30-2006, 03:06 PM

stock d16z6
14b
8 psi
hf mani
2.5in open downpipe
2.5 in charge pipes from intercooler to tb
1.75in from turbo to intercooler
RFL bov
Vafc hack with supra 440cc injectors

LaOstha · 05-30-2006, 03:07 PM

What does it mean when all the coolant is pushed back into your resevoir

BlackCRX · 05-30-2006, 03:12 PM

Quote:

Originally Posted by FR-MOB: SnoFlake

i can see that.. was it a coupe or a 4 dr hatch???

sorry if i sounded like a smart ass

didnt mean for it to come out that way

BlackCRX · 05-30-2006, 03:12 PM

Quote:

Originally Posted by LaOstha

What does it mean when all the coolant is pushed back into your resevoir

most likely a bad headgasket
its the sohc plaque

05-30-2006, 07:31 AM	#27
Mr.Death Member Join Date: Mar 2004 Location: Canada Posts: 1,005	Re: (civic nation4me) d16Z6 stock motor Edelbrock turbo kit(Gt28R turbo) Tial BOV Turbosmart MBC DSM 450's Prescision intercooler Stock Fuel pump/FPR 3" Magnaflow muffler/no resonator 2.5" charge pipes ZC L3 LSD tranny Tuned with Techtom by http://www.neetronics.com/neet/ 9 lbs boost 212whp daily driven for 2 years Modified by Mr.Death at 4:48 PM 6/4/2006 __________________ EVIL IS AS EVIL DOES

05-30-2006, 08:56 AM	#28
LoSt is BlaCk Senior Member Join Date: Apr 2003 Location: Just Drank A 5th of VODKA Dare me to drive, Ca, u.s. Posts: 11,365	Re: (Mr.Death) you better take car of that new setup santos!!!! __________________ www.AutoLife.tv coming soon www.vimeo.com/autolifetv (Event Coverage FOR Enthusiasts) Contact us at: AutoLifeTV@gmail.com

05-30-2006, 10:01 AM	#29
RyanEJ8 Member Join Date: Feb 2003 Location: Margaritaville Posts: 7,354	Re: (LoSt is BlaCk) D16Y8 Block and Head SRP Pistons with JE Rings approx 10:1 C/R and .020 overbore Eagle Rods with ARP Rod Bolts Golden Eagle Block Guard Stock Crankshaft/Girdle/Oil Pump/Water Pump Stock Oil Pan ZEX 105300 Street/Strip Camshaft ZEX Valve Springs with Stock Retainers AEM Tru-Time Cam Gear ARP Head Studs Stock Valves ACT Street Disk and Heavy Duty Pressure Plate Stock Y8 Tranny Stock Axels RC 750cc saturated injectors AEM Fuel Rail/Fuel Filter/FPR Holley 255lph High Pressure Fuel Pump Stock Ignition and Wires Hondata S200 Precision SC50 .48 A/R Precision AS1025 600hp intercooler Lovefab SST Manifold Lovefab Downpipe Tial 38mm Wastegate Tial BOV Greddy Profec B Spec II Boost Controller SVE 3bar Map Sensor Best 1/4 Mile Time so far: 13.01 @ 107.5MPH, 14psi Going back for 12's very soon with the same setup. Just need to get the 60' down alot. __________________ 2000 Honda Civic EX Coupe D16Y8, 12.80@105.8 14 psi SOLD 2004 Ford F150 XLT Supercab Triton V8

05-30-2006, 10:08 AM	#30
BlackCRX Junior Member Join Date: Aug 2001 Location: Vancouver, BC, Canada Posts: 653	stock y8 custom shorty manifold kkk k26 turbo with stock external wastegate @ 7psi DSM 450cc injectors DSM BOV 2.25 downpipe and exh 13.5 on 22inch slicks aiming for more boost and 12's once i get a new exh/dp setup __________________ stock D16Y8 + 15psi = 235whp 13.3@109mph - 15psi. granny shifting to save an already dying tranny

05-30-2006, 10:12 AM	#31
D16SohcVtec Junior Member Join Date: Oct 2004 Posts: 562	Re: (civic nation4me) 93 DX Hatch Stock ZC SOHC VTEC RLD Fab Ramhorn manifold RLD Fab Dumptube RLD Fab 3 in DP all the way back to 3 in Tanabe Racing Medallion DSM 450's Garrett t3/t4 50 trim .48 ar 2.25 in IC piping Tial 38mm wastegate TurboXS boost controller Walbro 190LPH Apexi Twin Chamber BOV JRC FMIC This is all I can think of right now. __________________ Boost; She Never Argues With Me. 93' Civic SOHC Turbo - Sold

05-30-2006, 10:13 AM	#32
slodel Member Join Date: Apr 2004 Location: Minnesota, United States Posts: 1,104	Re: (RyanCivic2000) 1994 honda civic coupe d16z6 stock block edelbrock intake manifold 3 inch downpipe EVO turbo log mani intercoooler dsm bov b&m fpr turbo xs boost controller hondata s200 arp rod bolts oem head gasket rc 440s 3 bar map sensor retuning this week as we speak the first tune was on way to big of a turbo that didnt spoool until 4500 and a shitty fuel pump. RS motors is putting on the new turbo and log mani and retuning this week. Going down friday to pick it up for the first race of the season on Saturday. Number and Times will be up Sunday Will be using 22 inch M&H slicks going for 12s __________________ Sleep Medicine Graduate Student Sleep Association-Former President Next stop Division of Sleep Medicine Harvard

05-30-2006, 10:17 AM	#33
rextec Member Join Date: Aug 2003 Location: so.Cal. Posts: 1,284	Re: (BlackCRX) i havent put this on the car yet cause im waiting to pass smog first . planning on running around 16psi on pump gas and hoping for around 300whp. oh yeah all this in a first gen crx http://honda-tech.com/zerothread?id=1612104. -d16z6 .20 overbore stock sleeves -cp 9.1.1 pistons -eagle rods -acl bearings -arp studs -tial 38mm wg -bored stock tb -stock head -zex 59300 cam -rc 500cc injectors -255 lph walbro inline -thermal IM gasket -BMC elf mani -precision gt3251e turbo -"RFL" bov -crome -zeitronix wb -3.5 bar map Modified by rextec at 9:09 PM 5/30/2006 Modified by rextec at 9:10 PM 5/30/2006 Modified by rextec at 9:10 PM 5/30/2006 __________________ BUT MY STUFF http://honda-tech.com/zerothread?id=1808933 VOUCHES-sold to: 9civic1hatch, streetfamehatch, alchemist, asilaydying1984, 4door hobo, jasonx, alfee, Vita-Soy, muasboi, blackccoupe

05-30-2006, 11:23 AM	#35
SOHC_MShue Senior Member Join Date: Jun 2002 Location: Richmond, Va, usa Posts: 11,365	Re: (FR-MOB: SnoFlake) heres my setup: d16y8 block/z6 head arp headstuds zex 59300 cam and valvesprings hf manifold converted to use a tial 38mm wastegate small ass wrx turbo on 12psi greddy profec B spec II tial 50mm bov uberdata dsm 450s crappy 2.5" downpipe that looks like its been beat up with a steel bat 2.25" press bent piping exhaust. ran 13.8@103mph in my 98ex coupe with some shitty 60' action. I did put a sti turbo on it the other week, but the seals went all shitty on me __________________ Neptune Dealer www.adrenalineautoworks.com

05-30-2006, 01:19 PM	#36
ladysman Member Join Date: May 2002 Location: Illanoise, USA Posts: 3,448	Re: (SOHC_MShue) Check my sig. __________________ For Sale: Coupe/Sedan Trunk Tray

05-30-2006, 02:19 PM	#39
S@nt0s Your Future STEP DAD!!!! Join Date: Jun 2003 Location: PUTTIN UR MOUTH ON CURBZ 310, SoCal Posts: 22,535	Re: (igo4bmx) DSM 450's WalBro intake pump 3 Bar Chrome getting put on within the next 2 weeks.... lets see what these greddy kits are made of.... __________________ If NISMO stands for NISsan MOtorsport,what do they call HOnda MOtorsport MUNKY W3RKZ INC BISIMOTO ENGINEERING CAMP1320

05-30-2006, 02:25 PM	#40
JDMCRX Member Join Date: Oct 2001 Location: PETAWAWA,OTTAWA,GAGETOWN,TRENTON Ont, Canada Posts: 5,332	Re: (igo4bmx) D16Y8 STOCK ARP head studs 65ft lbs STR block Gaurd REVHARD manifold TIAL Wastegate TIAL BOV Skunk2 Intake 62mm TB T3T4 .51 comp .48Exh 10psi ran 14.1 at 102mph on street tires. Shitty __________________ 1999 Acura 1.6EL turbo D16Y8 300whp 2002 Suzuki Grand Vitara with H27 1995 Honda Civic SI Build thred http://honda-tech.com/showthread.php?t=23987711994 Honda Accord Wagon Build thread http://honda-tech.com/showthread.php...9#post36883659

05-30-2006, 02:32 PM	#41
S@nt0s Your Future STEP DAD!!!! Join Date: Jun 2003 Location: PUTTIN UR MOUTH ON CURBZ 310, SoCal Posts: 22,535	Re: (JDMCRX) 14.1 nd you were making 255? wha car is this in? __________________ If NISMO stands for NISsan MOtorsport,what do they call HOnda MOtorsport MUNKY W3RKZ INC BISIMOTO ENGINEERING CAMP1320

05-30-2006, 02:58 PM	#44
blackeg Member Join Date: Feb 2003 Location: schooling kids in ny, usa Posts: 6,678	Re: (igo4bmx) old setup of mine that was stolen in 04. stock z6, 143,000miles turbonetics log manifold &2.25 dp t3 50 trim .60/.48 tial 38mm dsm bov dsm450's uberdata jrc 5inch i/c act hdss with streetlite flywheel apex ws catback i only ran the car on 6-7psi due to a broken chip burner and theft about 3-4 weeks after being completed. i liked it though, it had a nice broad powerband __________________ hx coupe 2652lbs - lsvtec--318whp/241wtq 12.54@115.57 on bfg's 92 hatch---415whp/300wtq in '07 425whp/286wtq in '08 2410lbs 12.1@125.5 1bar boost @etown fall nats

05-30-2006, 03:03 PM	#45
LaOstha Junior Member Join Date: Sep 2004 Location: CT 2 VA Posts: 957	Re: (FR-MOB: SnoFlake) anyone having a problem with their car overheating with the small thin ass 92-95 radiators.

05-30-2006, 03:06 PM	#47
LaOstha Junior Member Join Date: Sep 2004 Location: CT 2 VA Posts: 957	Re: (LaOstha) stock d16z6 14b 8 psi hf mani 2.5in open downpipe 2.5 in charge pipes from intercooler to tb 1.75in from turbo to intercooler RFL bov Vafc hack with supra 440cc injectors

05-30-2006, 03:07 PM	#48
LaOstha Junior Member Join Date: Sep 2004 Location: CT 2 VA Posts: 957	Re: (FR-MOB: SnoFlake) What does it mean when all the coolant is pushed back into your resevoir

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search