Honda and Acura Technical Forums

Missing Gears · 04-21-2006, 08:49 PM

Quote:

Originally Posted by ranta18

One thing I noticed is that the cams made peak power around 7100 rpm and peak torque at 7000. Any reason behind the lower than normal peak hp? Back when I had Crower Stage 2's I made peak power at around 7800 and the torque started to fall off at 6600. The setup for that motor: http://www.rndauto.com/ranta.htm I'm curious as to how the Crower Stage 3's will act in my new motor.

seems like as the motor has gotten bigger, the rpm at which the power peaks has dropped. the highest i have ever made power was about 7600 rpm and that was on a stock motor.

i like making the power earlier because i dont have to rev so high

when i ran crower 3s on a smaller motor they only made power to about 7400 and i lost a ton of midrange. i have the graph somewhere along w/ about 30 other setups. i will try to find it and post.

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

precisionelite · 05-03-2006, 09:04 AM

Are you going to be at the track this friday Randy? I'm going to be trying to hit 14.5...tony bet me 20 bucks i couldn't do it! I just stripped out 78lbs from my car, i'm ready to rock!

-Greg

Missing Gears · 05-03-2006, 12:12 PM

yeah, but i wont have the car w/ me. just going to watch the ops cars run. goodluck, see ya there.

Dragline · 05-04-2006, 07:18 AM

Randy, I found this pic on Capitals website. There is about 5 or 6 of them in just the 2 albums I looked at, so there is probaly more..

precisionelite · 05-07-2006, 09:36 AM

Car wasn't running as strong as usual cause it was so hot and humid, but I had fun. I hit a 2.173 60' with falken ziex 512 tires :-) I missed second one time and my revs shot to 8,500 on the tach. I was like "D'oh, I pulled a randy"

Car is fine though. Good luck this season randy!

darkdayz · 05-07-2006, 03:19 PM

what do you think a k series 2.4 L would put down as far as numbers in comparison to yours?

precisionelite · 06-09-2006, 05:23 PM

Randy, i'm at 188whp now and am hoping to be close to 200 with euro-r mani and some type s cams. What would be the proper sized slick to buy? Keep in mind, I have a 2001 prelude.

Televator · 12-09-2006, 07:44 PM

Big numbers for a motor with small development.

I think it wants to breathe a little more though.

05-03-2006, 09:04 AM	#227
precisionelite Join Date: Aug 2004 Location: Annapolis, Maryland, U.S.A. Posts: 632	Re: (Missing Gears) Are you going to be at the track this friday Randy? I'm going to be trying to hit 14.5...tony bet me 20 bucks i couldn't do it! I just stripped out 78lbs from my car, i'm ready to rock! -Greg __________________ 2001 Prelude 197/152 1.956 60' (M&H 23x8.5x15) 13.997@98.27 MPH Tempest Tuned http://www.tempestracing.net

05-03-2006, 12:12 PM	#228
Missing Gears Join Date: Dec 2005 Posts: 1,207	Re: (precisionelite) yeah, but i wont have the car w/ me. just going to watch the ops cars run. goodluck, see ya there. __________________ how did i get here http://is.rely.net/1-92-30008-l-au16...EFX98SjN8A.gif

05-04-2006, 07:18 AM	#229
Dragline Member Join Date: Mar 2004 Posts: 2,649	Re: (Missing Gears) Randy, I found this pic on Capitals website. There is about 5 or 6 of them in just the 2 albums I looked at, so there is probaly more..

05-07-2006, 09:36 AM	#230
precisionelite Join Date: Aug 2004 Location: Annapolis, Maryland, U.S.A. Posts: 632	Re: (Dragline) Car wasn't running as strong as usual cause it was so hot and humid, but I had fun. I hit a 2.173 60' with falken ziex 512 tires :-) I missed second one time and my revs shot to 8,500 on the tach. I was like "D'oh, I pulled a randy" Car is fine though. Good luck this season randy! __________________ 2001 Prelude 197/152 1.956 60' (M&H 23x8.5x15) 13.997@98.27 MPH Tempest Tuned http://www.tempestracing.net

05-07-2006, 03:19 PM	#231
darkdayz Join Date: Jun 2004 Location: Greensboro, NC, U.S.A. Posts: 721	Re: My new 2.4L COMP 4 motor w/dyno results (Missing Gears) what do you think a k series 2.4 L would put down as far as numbers in comparison to yours? __________________ "In the absence of the truth...bullshit will prevail" (Dmx,2006)

06-09-2006, 05:23 PM	#232
precisionelite Join Date: Aug 2004 Location: Annapolis, Maryland, U.S.A. Posts: 632	Re: My new 2.4L COMP 4 motor w/dyno results (darkdayz) Randy, i'm at 188whp now and am hoping to be close to 200 with euro-r mani and some type s cams. What would be the proper sized slick to buy? Keep in mind, I have a 2001 prelude. __________________ 2001 Prelude 197/152 1.956 60' (M&H 23x8.5x15) 13.997@98.27 MPH Tempest Tuned http://www.tempestracing.net

12-09-2006, 07:44 PM	#233
Televator Member Join Date: Sep 2005 Location: Tempe/Scottsdale, AZ, USA Posts: 1,291	Re: My new 2.4L COMP 4 motor w/dyno results (Missing Gears) Big numbers for a motor with small development. I think it wants to breathe a little more though. __________________ 無限MUGEN Prelude Si VTEC ICB

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search