Honda and Acura Technical Forums

Autoworks · 11-13-2005, 04:38 PM

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

JonnyCoupe · 11-16-2005, 05:47 AM

Who uses TurboEdit with their setups?

spiceisler · 11-16-2005, 05:56 AM

My old setup:

Log mani
14B
DSM 450's
PR4/Turboedit
SMIC
MSD 6AL/Blaster SS
2 1/2 DP / exhaust
Greddy Type S

Modified by spiceisler at 8:20 AM 8/9/2006

AbitAvenger · 11-16-2005, 09:22 AM

what mani?? ^^^

spiceisler · 11-16-2005, 11:22 AM

Made my own!

used2baracer · 11-16-2005, 11:27 AM

car has been sitting for some time... will have numbers once I get a chance to tune it

quis23 · 11-16-2005, 11:54 AM

/\ make sure you cover up that + battery post or that pipe

Scracho · 11-16-2005, 02:07 PM

Quote:

Originally Posted by quis23

/\ make sure you cover up that + battery post or that pipe

I was just going to say the same thing!

used2baracer · 11-16-2005, 04:29 PM

Quote:

Originally Posted by quis23

/\ make sure you cover up that + battery post or that pipe

yep

Modified by used2baracer at 8:29 PM 11/23/2005

JonnyCoupe · 11-22-2005, 09:03 AM

Car earlier in thread now has a power plot at a modest 5psi.

Scracho · 11-22-2005, 05:07 PM

^^^ Not bad for only 5PSI. Very nice linear power there

CRXdan · 11-22-2005, 05:53 PM

1.6L 16V Integra Blacktop D16a1 Engine
00 Civic Manifold
16g TD05 Turbo
Blitz DD BOV (SS Horn)
Yonaka 26X5 intercooler
2.5" Mandrel Charge Pipes
Turboedit PM6
DSM 450 CC
KN Motorcyle Air Filter
B&M FP Guage
3" exhaust
3" Resonator

Best time was a 13.4 best trap was a 108mph all on street tires 10-11 psi
Might be switching to a diff motor for next season though. This motor has too much blowby and I have a z6 sitting in the garage

acy76 · 11-22-2005, 07:42 PM

Just out of curiosity, would someone run down the D16A1 vs. ZC differences for me?

therealciviczc · 11-22-2005, 08:23 PM

This is my ZC with a greddy kit and a ghetto fabulous intercooler. There were some minor fuel issues that I'm working out now... as you can see.

This is a bone stock ZC with a Greddy kit slapped on it and a walbro 255 with FMU as 'fuel management'. The car ran 14.0 at 100mph, but spun and hopped around like crazy... resulting in horrible 2.3 and 2.4 60ft times. I think potential was there.

Autoworks · 12-12-2005, 05:48 PM

Autoworks · 03-05-2006, 07:00 AM

again for more

Jo-Tek Concepts · 03-05-2006, 11:24 AM

Sweet thread. I'm actually getting ready to do a semi build on a ZC. Not for race purposes, just to have some merging power and a lil shock and aww.
forged rods and pistons. I'm going to tig a stainless steel manifold together (tubular) and prolly run a t3 on her with a hidden Sidemount intercooler. I need to get someone to hook me up with turboedit though...........anyone?

G-reX · 03-05-2006, 12:34 PM

I'm liking this topic, I'm soon going to start cathering parts for a boosted setup.

djphonics · 04-07-2006, 11:45 AM

This is cool. I was trying to search about turbo zc but the stupid search omits the phrase "zc" because its too short so then i get like 1000 posts that just have the word turbo in them This is good though!

Autoworks · 05-01-2006, 10:15 PM

bump

I'm building to DOHC ZC T's right now

http://www.honda-tech.com/zerothread?id=1591178
and
http://www.honda-tech.com/zerothread?id=1612854

LurkerS8 · 05-02-2006, 12:51 AM

278whp and 230wtq on a stock head and block dohc zc. This was done on 15lbs and a td06 17c turbo. Converted to obd1 and tuned on crome pro.

Ran that time slipping 3rd gear in a 1988hf crx.

Autoworks · 05-28-2006, 04:01 PM

Autoworks · 08-07-2006, 10:19 AM

up for more

spoolin turbo s · 08-07-2006, 12:26 PM

in for more

the ZC interests me

Autoworks · 08-07-2006, 01:06 PM

My graph on 10 psi and letting out at 6k RPM

OBDO DOHC ZC
(I am now rebuilding it...300+WHP to come)

11-16-2005, 05:47 AM	#27
JonnyCoupe Junior Member Join Date: Jan 2003 Location: Tamworth, England, England Posts: 449	Re: (Autoworks) Who uses TurboEdit with their setups? __________________ Pure JDM Integra SiR-G It even has a Jap license disk and parking pass http://images.honda-tech.com/set1/smile/emsmilep.gif

11-16-2005, 05:56 AM	#28
spiceisler Junior Member 1990 Honda Civic Join Date: Jun 2002 Location: Brooklyn, NY Posts: 605	Re: (JonnyCoupe) My old setup: Log mani 14B DSM 450's PR4/Turboedit SMIC MSD 6AL/Blaster SS 2 1/2 DP / exhaust Greddy Type S Modified by spiceisler at 8:20 AM 8/9/2006 __________________ Canon Digital Rebel XTi Welder and Fabricator

11-16-2005, 09:22 AM	#29
AbitAvenger Member Join Date: Oct 2004 Location: georgia, bitch Posts: 2,791	what mani?? ^^^ __________________ 1993 Civic Si-T : D16Z6 + 16g : Sold 2000 Civic Si : 84.5mm x 89mm darton gsr 9:1 cp eagle supertech garret35r neptune www.wazees.comFor all of your polished billet pulley needs -mustang-corvette-saab-

11-16-2005, 11:22 AM	#30
spiceisler Junior Member 1990 Honda Civic Join Date: Jun 2002 Location: Brooklyn, NY Posts: 605	Re: (AbitAvenger) Made my own! __________________ Canon Digital Rebel XTi Welder and Fabricator

11-16-2005, 11:27 AM	#31
used2baracer Join Date: Nov 2002 Location: Southern, CA, U.S. Posts: 512	Re: (spiceisler) car has been sitting for some time... will have numbers once I get a chance to tune it __________________ Garrett T3/T04B - $399 \| Garrett T3/T04E - $489 \| Intercooler Piping - $169 <FONT COLOR="red">WestCoast-Turbo.com</FONT> Garrett Turbos & Turbo Accessories

11-16-2005, 11:54 AM	#32
quis23 Member Join Date: Mar 2002 Location: NoVA, US of A Posts: 1,511	Re: (used2baracer) /\ make sure you cover up that + battery post or that pipe __________________ check out- iamfj.com bryan-collins.com

11-22-2005, 09:03 AM	#35
JonnyCoupe Junior Member Join Date: Jan 2003 Location: Tamworth, England, England Posts: 449	Re: (used2baracer) Car earlier in thread now has a power plot at a modest 5psi. __________________ Pure JDM Integra SiR-G It even has a Jap license disk and parking pass http://images.honda-tech.com/set1/smile/emsmilep.gif

11-22-2005, 05:07 PM	#36
Scracho Junior Member Join Date: Oct 2005 Location: Brantford, Ontario Posts: 174	Re: (JonnyCoupe) ^^^ Not bad for only 5PSI. Very nice linear power there __________________ Brantford Honda Jon Machado - Service

11-22-2005, 05:53 PM	#37
CRXdan Junior Member Join Date: Jun 2004 Location: Coquitlam., BC., Can Posts: 486	Re: ZC-T 1.6L DOHC Setups OBD-0/1 Specs/Dyno #'s (Scracho) 1.6L 16V Integra Blacktop D16a1 Engine 00 Civic Manifold 16g TD05 Turbo Blitz DD BOV (SS Horn) Yonaka 26X5 intercooler 2.5" Mandrel Charge Pipes Turboedit PM6 DSM 450 CC KN Motorcyle Air Filter B&M FP Guage 3" exhaust 3" Resonator Best time was a 13.4 best trap was a 108mph all on street tires 10-11 psi Might be switching to a diff motor for next season though. This motor has too much blowby and I have a z6 sitting in the garage __________________ Holset + SOHC + CRX 87 toyota 4x4 daily beater 72 datsun 240z project car

11-22-2005, 07:42 PM	#38
acy76 Join Date: Sep 2003 Location: Twin Cities Posts: 881	Re: ZC-T 1.6L DOHC Setups OBD-0/1 Specs/Dyno #'s (CRXdan) Just out of curiosity, would someone run down the D16A1 vs. ZC differences for me? __________________ <U>SQUARE DEALERS:</U> ITR206, VTeC4TheChildren, intercooledJRSC, 93LSivic, booscivic, CHEETAH, System-7, ArinX, Saga, Bulldogg83, EF_LSVtec, 93b18civic, SiR Kid, 92RED Hatch, Dan GSR, Bnjmn <FONT COLOR="green">biofuel -- our future</FONT> My vouch thread: http://honda-tech.com/zerothread?id=995134

11-22-2005, 08:23 PM	#39
therealciviczc Member Join Date: Dec 2001 Posts: 1,981	This is my ZC with a greddy kit and a ghetto fabulous intercooler. There were some minor fuel issues that I'm working out now... as you can see. This is a bone stock ZC with a Greddy kit slapped on it and a walbro 255 with FMU as 'fuel management'. The car ran 14.0 at 100mph, but spun and hopped around like crazy... resulting in horrible 2.3 and 2.4 60ft times. I think potential was there.

12-12-2005, 05:48 PM	#40
Autoworks Member Join Date: Jan 2004 Location: GO AUTOWORKS DOT COM Posts: 9,878	Re: (therealciviczc) __________________ http://www.GO-AUTOWORKS.com 88' Civic HB D16 10.99 @131MPH 09'-2010 Import Face-Off Race Sponsors...Keep the Sport alive, Come Race with US!!

03-05-2006, 07:00 AM	#41
Autoworks Member Join Date: Jan 2004 Location: GO AUTOWORKS DOT COM Posts: 9,878	Re: (Autoworks) again for more __________________ http://www.GO-AUTOWORKS.com 88' Civic HB D16 10.99 @131MPH 09'-2010 Import Face-Off Race Sponsors...Keep the Sport alive, Come Race with US!!

03-05-2006, 11:24 AM	#42
Jo-Tek Concepts Junior Member Join Date: Apr 2003 Location: Lubbock, Tx Posts: 487	Re: (Autoworks) Sweet thread. I'm actually getting ready to do a semi build on a ZC. Not for race purposes, just to have some merging power and a lil shock and aww. forged rods and pistons. I'm going to tig a stainless steel manifold together (tubular) and prolly run a t3 on her with a hidden Sidemount intercooler. I need to get someone to hook me up with turboedit though...........anyone? __________________ Bought from:HONDA_TYPE_R Juggernaut2 VerySlowCivic UltraRev Sikciv666 JunkYardGSR b18bcrxhf acestainless Sold to:Drift Glok1 BB6-213 Shanepa2001 Traded with: Juggernaut2 notsocivic

03-05-2006, 12:34 PM	#43
G-reX Join Date: Jun 2002 Location: Nova Scotia,Canada, Canada Posts: 206	Re: ZC-T 1.6L DOHC Setups OBD-0/1 Specs/Dyno #'s (Scracho) I'm liking this topic, I'm soon going to start cathering parts for a boosted setup. __________________ G-reX Racing Team 88 CRX Si/ZC-13.13 @ 103.94mph / Stock internals ,stock ecu @ 7 psi. My Garage

04-07-2006, 11:45 AM	#44
djphonics Member Join Date: Feb 2006 Location: Portland, OR, USA Posts: 1,278	Re: ZC-T 1.6L DOHC Setups OBD-0/1 Specs/Dyno #'s (G-reX) This is cool. I was trying to search about turbo zc but the stupid search omits the phrase "zc" because its too short so then i get like 1000 posts that just have the word turbo in them This is good though! __________________ NEW DESIGNS! ---> CRX T-shirts: http://images.honda-tech.com/set1/smile/emthup.gif http://www.cafepress.com/djphonics 1990 Accord LX 4 Door 1988 CRX Si, DOHC ZC - Sold (good luck, lil buddy!)

05-01-2006, 10:15 PM	#45
Autoworks Member Join Date: Jan 2004 Location: GO AUTOWORKS DOT COM Posts: 9,878	Re: ZC-T 1.6L DOHC Setups OBD-0/1 Specs/Dyno #'s (djphonics) bump I'm building to DOHC ZC T's right now http://www.honda-tech.com/zerothread?id=1591178 and http://www.honda-tech.com/zerothread?id=1612854 __________________ http://www.GO-AUTOWORKS.com 88' Civic HB D16 10.99 @131MPH 09'-2010 Import Face-Off Race Sponsors...Keep the Sport alive, Come Race with US!!

05-02-2006, 12:51 AM	#46
LurkerS8 Junior Member Join Date: Apr 2005 Location: Houston, Tx, U.S.A Posts: 225	Re: ZC-T 1.6L DOHC Setups OBD-0/1 Specs/Dyno #'s (Autoworks) 278whp and 230wtq on a stock head and block dohc zc. This was done on 15lbs and a td06 17c turbo. Converted to obd1 and tuned on crome pro. Ran that time slipping 3rd gear in a 1988hf crx.

05-28-2006, 04:01 PM	#47
Autoworks Member Join Date: Jan 2004 Location: GO AUTOWORKS DOT COM Posts: 9,878	Re: ZC-T 1.6L DOHC Setups OBD-0/1 Specs/Dyno #'s (Autoworks) __________________ http://www.GO-AUTOWORKS.com 88' Civic HB D16 10.99 @131MPH 09'-2010 Import Face-Off Race Sponsors...Keep the Sport alive, Come Race with US!!

08-07-2006, 10:19 AM	#48
Autoworks Member Join Date: Jan 2004 Location: GO AUTOWORKS DOT COM Posts: 9,878	Re: ZC-T 1.6L DOHC Setups OBD-0/1 Specs/Dyno #'s (Autoworks) up for more __________________ http://www.GO-AUTOWORKS.com 88' Civic HB D16 10.99 @131MPH 09'-2010 Import Face-Off Race Sponsors...Keep the Sport alive, Come Race with US!!

08-07-2006, 12:26 PM	#49
spoolin turbo s Junior Member Join Date: Jan 2004 Location: gate city, VA, usa Posts: 839	Re: ZC-T 1.6L DOHC Setups OBD-0/1 Specs/Dyno #'s (Autoworks) in for more the ZC interests me __________________ "Son if you got lag then you ain't driving right" -Caroll Shelby

08-07-2006, 01:06 PM	#50
Autoworks Member Join Date: Jan 2004 Location: GO AUTOWORKS DOT COM Posts: 9,878	Re: ZC-T 1.6L DOHC Setups OBD-0/1 Specs/Dyno #'s (spoolin turbo s) My graph on 10 psi and letting out at 6k RPM OBDO DOHC ZC (I am now rebuilding it...300+WHP to come) __________________ http://www.GO-AUTOWORKS.com 88' Civic HB D16 10.99 @131MPH 09'-2010 Import Face-Off Race Sponsors...Keep the Sport alive, Come Race with US!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search