Honda and Acura Technical Forums

wantboost · 07-02-2006, 01:14 PM

youd have to shave a shitton of the block to get them to fit

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

drumking15 · 07-02-2006, 03:59 PM

Quote:

Originally Posted by jononioo

i don't know if this has been covered or not, but will a hx30 or 35 fit on a drag mani and still keep A/C and P/S? From what ive read, these turbo seem to be pretty decent.

a/c most likely...but ps might be a stretch....all depends what side you want the compressor on...its rather large

jononioo · 07-02-2006, 04:28 PM

Quote:

Originally Posted by drumking15

a/c most likely...but ps might be a stretch....all depends what side you want the compressor on...its rather large

what if the compressor housing is pointing towards the passanger side like the drag kits?!?!

CoreyR · 07-02-2006, 08:55 PM

i dont think youve ever seen an hx35 compressor housing in person, its ****ing large to say the least. do nt count on it being able to run on a drag mani and keep AC and PS. not to mention the shitty wastegate placement on the drag manifold it probably wouldnt be able to regulate the boost enough on this monster.

Joseph Davis · 07-02-2006, 09:09 PM

I think blundar's friend Shawn had one on a Drag mani, I may be wrong.

For my $0.02... HX35 compressor scroll is 2" larger than T04, and the comp scroll is an inch or so further out referrenced from the turbine inlet flange. This means most manifolds designed to tuck a T3/T04 against the block end up tucking a Holset compressor into the engine's cooling jacket. The rest of the manifolds seem to place the turbo into your radiator, etc, and generally be a PITA.

jononioo · 07-02-2006, 10:20 PM

Quote:

Originally Posted by Joseph Davis

I think blundar's friend Shawn had one on a Drag mani, I may be wrong.

For my $0.02... HX35 compressor scroll is 2" larger than T04, and the comp scroll is an inch or so further out referrenced from the turbine inlet flange. This means most manifolds designed to tuck a T3/T04 against the block end up tucking a Holset compressor into the engine's cooling jacket. The rest of the manifolds seem to place the turbo into your radiator, etc, and generally be a PITA.

any pics of "shawn's" setup. im planning on keeping the block stock so 300max (track only) and 250 daily probably with E-cut.

Is the HX30 compressor housing smaller? I hear these are better for stock 1.8L engines instead of the HX35. Im more worried about price though. thats my only set back right now. I really want to keep my A/C and P/S. I may have to ditch my hoslet dreams though. what do you guys think?

jononioo · 07-03-2006, 11:42 AM

BUMP

Whiteintegra · 07-03-2006, 05:21 PM

Hey, i just finished reading this thead and i must say that the hoslets look promising!!! I might consider one for my setup, but i like jononioo would like to keep PS and AC. Bump for more info.

RyaN95i4 · 07-04-2006, 01:04 AM

Has a HX40 compressor map been posted yet?

I went back quite a ways and did not see one, and dont recall one the first time I went through this thread.

Thanks

bag · 07-04-2006, 02:58 AM

watch this this video..why does the holset turbo sound like that? just curious..sounds like a spaceship or some shit

Joseph Davis · 07-04-2006, 07:23 AM

Holsets are spaceship technology, dog.

drumking15 · 07-04-2006, 07:48 AM

Quote:

Originally Posted by RyaN95i4

Has a HX40 compressor map been posted yet?

I went back quite a ways and did not see one, and dont recall one the first time I went through this thread.

Thanks

you have to be on the inside to get those

whats your email...

wantboost · 07-04-2006, 09:11 AM

Quote:

Originally Posted by bag

watch this this video..why does the holset turbo sound like that? just curious..sounds like a spaceship or some shit

its because of the anti surge housing and running around 50 pounds of boost

jononioo · 07-04-2006, 12:52 PM

Quote:

Originally Posted by wantboost

its because of the anti surge housing and running around 50 pounds of boost

I think that guy was running 30psi. And they are saying its doing that b/c there is no bov so air is going back into the turbo.

Anyone know if a hx30 will fit a drag mani and clear PS and AC?

jononioo · 07-04-2006, 01:35 PM

i don't know if this has been posted yet but here is a comparison of a t04b and the hx30.
This pic was stolen off a dsm forum

Here, the hx30 compressor housing is pictured on top of the t04b

drumking15 · 07-05-2006, 04:36 PM

well all of you ballas will be happy...im on the rollers come saturday...we'll see what it makes at 15psi...

OMG B16 · 07-05-2006, 04:53 PM

Quote:

Originally Posted by drumking15

well all of you ballas will be happy...im on the rollers come saturday...we'll see what it makes at 15psi...

Pics?

drumking15 · 07-05-2006, 05:00 PM

Quote:

Originally Posted by OMG B16

Pics?

going to snap some as I type...walkin out the door

drumking15 · 07-05-2006, 05:21 PM

what no front mount heh!

thats right...big 3" exh heh...sleeper ;-)

custom heat shield / cai

its a start...ill get the rest up when i get home

Dr. D-Series · 07-05-2006, 08:05 PM

This is going to be funny.

I bolted up my h1c to my Hf mani with adaptor plate.
Perfect fit.
Oil drain looks like it will come out great.

CoreyR · 07-05-2006, 08:15 PM

id like to see a picture of that. im going to be running a top mount in a CRX with a 35W looks like the tbar is getting evicted. even with that gone its gonna be funny trying to make a manifold to fit it properly

Hulk22 · 07-06-2006, 04:38 AM

hey pm me your email ill send you a copy of my map. but the comp. map for the holset sent me was for h1e with was the early version of the hx model and its sweet spots starts around 1.5 tpr to about 3 bar its runs between 79 and 60% as you go to the right.
it show that even at 1.5 total pressure it can run between 35-45 lbs min at 60-65% efficiency's and thats out of the sweet spot area. the h1e flows about 55-58 lbs/min so the hx40 flows about 10% better than h1e but when we read theses maps got to remember they were flow on desial setup not gas

OMG B16 · 07-06-2006, 06:18 AM

Quote:

Originally Posted by drumking15

what no front mount heh!

thats right...big 3" exh heh...sleeper ;-)

custom heat shield / cai

its a start...ill get the rest up when i get home

wantboost · 07-06-2006, 06:39 AM

Quote:

Originally Posted by jononioo

I think that guy was running 30psi. And they are saying its doing that b/c there is no bov so air is going back into the turbo.

Anyone know if a hx30 will fit a drag mani and clear PS and AC?

diesels dont use blow off valves. diesels regulate fuel... not air

RyaN95i4 · 07-06-2006, 07:11 AM

Quote:

Originally Posted by drumking15

you have to be on the inside to get those

whats your email...

rmcdon1 @ gmail . com

remove all the spaces

Thanks!

07-02-2006, 08:55 PM	#1229
CoreyR Member Join Date: Aug 2004 Location: CT, USA Posts: 1,861	Re: (jononioo) i dont think youve ever seen an hx35 compressor housing in person, its ****ing large to say the least. do nt count on it being able to run on a drag mani and keep AC and PS. not to mention the shitty wastegate placement on the drag manifold it probably wouldnt be able to regulate the boost enough on this monster.

07-02-2006, 09:09 PM	#1230
Joseph Davis Member Join Date: Aug 2002 Location: ashEVILle, NC, USSR Posts: 4,417	I think blundar's friend Shawn had one on a Drag mani, I may be wrong. For my $0.02... HX35 compressor scroll is 2" larger than T04, and the comp scroll is an inch or so further out referrenced from the turbine inlet flange. This means most manifolds designed to tuck a T3/T04 against the block end up tucking a Holset compressor into the engine's cooling jacket. The rest of the manifolds seem to place the turbo into your radiator, etc, and generally be a PITA. __________________ There is no mechanical problem so difficult that it can not be overcome by brute strength and ignorance.

07-04-2006, 01:04 AM	#1234
RyaN95i4 Junior Member Join Date: Oct 2001 Location: S., FL Posts: 65	Has a HX40 compressor map been posted yet? I went back quite a ways and did not see one, and dont recall one the first time I went through this thread. Thanks __________________ http://www.GFmotorsports.net

07-04-2006, 02:58 AM	#1235
bag Join Date: Jan 2006 Location: EASTERN TIME Posts: 769	Re: (RyaN95i4) watch this this video..why does the holset turbo sound like that? just curious..sounds like a spaceship or some shit

07-04-2006, 07:23 AM	#1236
Joseph Davis Member Join Date: Aug 2002 Location: ashEVILle, NC, USSR Posts: 4,417	Re: (bag) Holsets are spaceship technology, dog. __________________ There is no mechanical problem so difficult that it can not be overcome by brute strength and ignorance.

07-03-2006, 11:42 AM	#1232
jononioo Join Date: May 2005 Posts: 256	BUMP

07-03-2006, 05:21 PM	#1233
Whiteintegra Junior Member Join Date: Jul 2006 Location: Nowhere, USA Posts: 810	Hey, i just finished reading this thead and i must say that the hoslets look promising!!! I might consider one for my setup, but i like jononioo would like to keep PS and AC. Bump for more info.

07-04-2006, 01:35 PM	#1240
jononioo Join Date: May 2005 Posts: 256	i don't know if this has been posted yet but here is a comparison of a t04b and the hx30. This pic was stolen off a dsm forum Here, the hx30 compressor housing is pictured on top of the t04b

07-05-2006, 04:36 PM	#1241
drumking15 Member Join Date: Jan 2003 Location: northern, ma, US Posts: 2,930	well all of you ballas will be happy...im on the rollers come saturday...we'll see what it makes at 15psi... __________________ OEP 4 Life...no other way to be http://images.honda-tech.com/set1/smile/emthup.gif

07-05-2006, 05:21 PM	#1244
drumking15 Member Join Date: Jan 2003 Location: northern, ma, US Posts: 2,930	what no front mount heh! thats right...big 3" exh heh...sleeper ;-) custom heat shield / cai its a start...ill get the rest up when i get home __________________ OEP 4 Life...no other way to be http://images.honda-tech.com/set1/smile/emthup.gif

07-05-2006, 08:05 PM	#1245
Dr. D-Series Member Join Date: Dec 2004 Location: Bronx, NY Posts: 1,344	This is going to be funny. I bolted up my h1c to my Hf mani with adaptor plate. Perfect fit. Oil drain looks like it will come out great. __________________ Eagle/Vitara Z6 436 whp 340 tq 10.452 @132.3, 1.625 60 ft. - Current. Xenocron Tuned. Eagle/Vitara Y7 279 whp 210 tq 11.200 @124.5, 1.68 60 ft. D15 Block / Y7 202 whp 160 tq 12.1 @112 , 1.70 60 ft.

07-05-2006, 08:15 PM	#1246
CoreyR Member Join Date: Aug 2004 Location: CT, USA Posts: 1,861	Re: (Dr. D-Series) id like to see a picture of that. im going to be running a top mount in a CRX with a 35W looks like the tbar is getting evicted. even with that gone its gonna be funny trying to make a manifold to fit it properly

07-06-2006, 04:38 AM	#1247
Hulk22 Junior Member Join Date: Sep 2005 Location: charlotte, nc, open roads Posts: 133	Re: (RyaN95i4) hey pm me your email ill send you a copy of my map. but the comp. map for the holset sent me was for h1e with was the early version of the hx model and its sweet spots starts around 1.5 tpr to about 3 bar its runs between 79 and 60% as you go to the right. it show that even at 1.5 total pressure it can run between 35-45 lbs min at 60-65% efficiency's and thats out of the sweet spot area. the h1e flows about 55-58 lbs/min so the hx40 flows about 10% better than h1e but when we read theses maps got to remember they were flow on desial setup not gas

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search