Holset users unite!

[Civic89stdB16]

also where to get a oil restrictor for my hx35 and what size. need it to work with my female side 4an feed line. thanks

This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Honda-Tech!

[slowhitEJ1]

finally got the motor in. Holset HX35 on a z6/vitara build with a twin scroll mani. still have to do some vacuum hose stuff, and fab a mount for the radiator

you can see here how the downpipe runs, and why the radiator wont fit in the stock location, and i MIGHT lose power steering but i think i can move the cooler lines out of the way.. opinions?

[deeweezy187]

Will this manifold work on a h1c?
http://www.spoolinperformance.com/sp...69b0f8c1ee243a

[ashb82]

where can i buy parts for holset turbos

[fmfkid250]

You can get everything from a dodge dealer if off a dodge truck. If not you gotta goto a truck place that sells cummins stuff.

As for an oil Feed I found the easy thing to do is to go to the dodge dealership get the factory one and drill the center and tap it for a 1/8npt.

[turbod16y8]

what do you guys think about this turbo. I want to go pick it up but want your guys opinion. Its gonna be for my d16z6 vitara/fjt build
http://lasvegas.craigslist.org/pts/1452717113.html or

http://lasvegas.craigslist.org/pts/1452719083.html

[turbod16y8]

bump

[912]

Originally Posted by SwappedTURBOegg

ready to race.


almost

which turbo is that, looks like h1c, ne way i just gat hx35 i have a spa top mount, people,with hx35 what other exhaust housing is there for the hx35,when i took off the wastegate acuator all that mounting point for acuator is ugly, i either want to grind off or find a replacement, was thinking bout the h1c housing cause its nice and smooth, ne suggestions, my reasons are because of my top mount, i know the 14cm housing spools great on b-series just look like shit when running top mount?

[ashb82]

so you want a non wastegated housing like these http://www.htturbo.com/thnew.htm

[turbod16y8]

anyone?

Originally Posted by turbod16y8

what do you guys think about this turbo. I want to go pick it up but want your guys opinion. Its gonna be for my d16z6 vitara/fjt build
http://lasvegas.craigslist.org/pts/1452717113.html or

http://lasvegas.craigslist.org/pts/1452719083.html

[Civic89stdB16]

holset rule

[Civic89stdB16]

need a fitting that is 4an male and m12x1.5 with a restrictor for my hx35 b16 setup. Where can I get one. Or do I not need a restrictor. thanks lmk

[912]

Originally Posted by ashb82

so you want a non wastegated housing like these http://www.htturbo.com/thnew.htm

thanks which housing do you guys suggest for gsr piston and rods buil i have hx35w 1999

[jiggacivic]

Just got this turbo it says H1E was wondering if i can make 600hp with this turbo on a b18c motor with 9:1 pistons etc.

[ashb82]

Originally Posted by 912

thanks which housing do you guys suggest for gsr piston and rods buil i have hx35w 1999

What horse power do you want to make. I research more on A/R for your hp goals or put a post in the FI section on here i am sure someone can tell you what would be best for your HP

12cm^2 = .63 A/R
16cm^2 = .83 A/R
18cm^2 =1.00 A/R

[CoonAssTEG]

Allright yall finally sold me here's what I just got tell me what you thinK!

[912]

Originally Posted by ashb82

What horse power do you want to make. I research more on A/R for your hp goals or put a post in the FI section on here i am sure someone can tell you what would be best for your HP

12cm^2 = .63 A/R
16cm^2 = .83 A/R
18cm^2 =1.00 A/R

hopefully 500 plus,

[912]

spa top mount, hx35w ,want to upgrade to bep ex housing, and squeez as much as i can from my low mile 99 holset, ps. i havent clocked the turbo or nething yet just wanted to see what it looked like, so sexy all i got to say

[jiggacivic]

Does anyone have any info on the holset h1e turbo posted it has a 8 blade compressor wheel, i am looking to make 600+ just wondering if this turbo can handle it.