Got a used ECU, need to remove immobilizer...
12-25-2004, 12:01 PM
#1
Honda-Tech Member
Thread Starter
Got a used ECU, need to remove immobilizer...
Who can help? 00/01 P73 ITR ECU. Obviously if you can help, send me a PM to avoid sharing this information with low lifes trolling the boards. Gracias.
12-25-2004, 01:48 PM
#7
Re: (opie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by opie »</TD></TR><TR><TD CLASS="quote">Tom, you dick 
Isn't the immobilizer just a chip?
**Not trying to reveal to much**</TD></TR></TABLE>
opie is a damn thief. i knew it.
Isn't the immobilizer just a chip?
**Not trying to reveal to much**</TD></TR></TABLE>
opie is a damn thief. i knew it.
Trending Topics
12-25-2004, 02:32 PM
#8
Honda-Tech Member
Thread Starter
Tom or I could just smash the brick against your windsheild I hear that works good too 
Opie Im pretty sure its just a chip...but there are lots of chips in there and Im not sure exactly what needs to be done to the chip or the board to disable it.
Opie Im pretty sure its just a chip...but there are lots of chips in there and Im not sure exactly what needs to be done to the chip or the board to disable it.
12-27-2004, 07:30 AM
#11
Senior Member
Re: (Bbasso)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bbasso »</TD></TR><TR><TD CLASS="quote">No Bumping.
Did you try a search?
If you had, You'd have seen that Mike M has done it, but unwilling to share the info with just any n00b.
https://honda-tech.com/zerothread?id=769239
Also, K@man had the info on how-to remove it, posted on his website at one point in time, I don't know if it's still there or not.
http://ecu.ff-squad.com/faq.imm.htm
http://ff-squad.com/ecu
http://ff-squad.com/technet
</TD></TR></TABLE>
^^^^^^^^^^ Yeah, what he would have said
Did you try a search?
If you had, You'd have seen that Mike M has done it, but unwilling to share the info with just any n00b.
https://honda-tech.com/zerothread?id=769239
Also, K@man had the info on how-to remove it, posted on his website at one point in time, I don't know if it's still there or not.
http://ecu.ff-squad.com/faq.imm.htm
http://ff-squad.com/ecu
http://ff-squad.com/technet
</TD></TR></TABLE>
^^^^^^^^^^ Yeah, what he would have said
12-27-2004, 07:43 AM
#15
Senior Member
Re: (Bbasso)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bbasso »</TD></TR><TR><TD CLASS="quote">Ok... I'm lost 
Explain in simple terms</TD></TR></TABLE>
Every thread I've seen that might have had it explained, has had posts deleted....
onyx00, Mike M, J.Davis, have each professed that they know how to do it.
K@man's webside apparently had this information at some point, but I couldn't find it anywhere.
Explain in simple terms</TD></TR></TABLE>
Every thread I've seen that might have had it explained, has had posts deleted....
onyx00, Mike M, J.Davis, have each professed that they know how to do it.
K@man's webside apparently had this information at some point, but I couldn't find it anywhere.
12-27-2004, 07:50 AM
#16
Honda-Tech Member
Thread Starter
yeah I didnt see it either. I sent Mike a pm. i dont mind that its not published information. i just hope someone will get back to me.
12-27-2004, 07:58 AM
#17
Honda-Tech Member
Join Date: Jun 2000
Location: Charleston, WV, USA
Posts: 5,216
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Chris F)
Chris you beat out Opie for valedictorian 
Opie get sludictorian (sp)???
Haha you've both been a good addition.
< Who saw Chris' new title and replied before he even read through the thread
Opie get sludictorian (sp)???
Haha you've both been a good addition.
< Who saw Chris' new title and replied before he even read through the thread
12-27-2004, 08:03 AM
#19
Honda-Tech Member
Re: (Chris F)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chris F »</TD></TR><TR><TD CLASS="quote">
Every thread I've seen that might have had it explained, has had posts deleted....
onyx00, Mike M, J.Davis, have each professed that they know how to do it.
K@man's webside apparently had this information at some point, but I couldn't find it anywhere.
</TD></TR></TABLE>
how many thieves have time to mess with circuitry changes in an ECU to steal the car. No car is worth that kinda time.
Good theft prevention. . . . take your ECU out of the car. lol
Every thread I've seen that might have had it explained, has had posts deleted....
onyx00, Mike M, J.Davis, have each professed that they know how to do it.
K@man's webside apparently had this information at some point, but I couldn't find it anywhere.
</TD></TR></TABLE>
how many thieves have time to mess with circuitry changes in an ECU to steal the car. No car is worth that kinda time.
Good theft prevention. . . . take your ECU out of the car. lol
12-27-2004, 07:25 PM
#25
Honda-Tech Member
Join Date: Jun 2002
Location: nc
Posts: 3,356
Likes: 0
Received 0 Likes
on
0 Posts
Re: Got a used ECU, need to remove immobilizer... (RTW DC2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RTW DC2 »</TD></TR><TR><TD CLASS="quote">Thanks anyway but I will find a way to do it for FREE</TD></TR></TABLE>
pm me...i tell you some info.....
pm me...i tell you some info.....