Honda and Acura Model Specific Forums

z06eateR · 03-31-2008, 03:18 PM

anyone out there have a write up or pictures of removing the charcoal canister off my 99 civic si??

dont ask me why i want to remove it blah blah blah...becuase i just want to remove it.

and i already am on a jumper to obd1 p28 ecu..

just curious if anyone has removed thiers off thier em1?? thnx...

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

bigsyke · 03-31-2008, 03:25 PM

I wouldnt remove it, I did, and if your not chipped you will throw a cel for the solenoid.

Plus your mpg may go down. After months of searching for a fix, it was a fact its better to leave it on, for many reasons other than emissions.

z06eateR · 03-31-2008, 03:27 PM

not to be a dick...but did u even read what i wrote?? i am already jumped to obd1 on a chipped p28...

what other problems would it cause?? i removed the one from my dc2..but thats turbo...

and already obd1.. so im trying to see whats up wit the obd2 shit..even if i am chipped obd1

stock.gsr · 03-31-2008, 03:40 PM

There's really nothing to it, i just removed it and connected the vent tube from the tank to the line that exits the bottom of the can (which just vents outside the engine bay), cap off the vac lines (if i remember correctly) and your done.

As long as you're obd1, especially a p28, you're all set.

z06eateR · 03-31-2008, 03:41 PM

RIGHT ON!!! THNX BRO!

spoon93 · 04-04-2008, 08:34 PM

all you have to do is get in a good stance grip the canister with both hands but make sure you have a good grip and with all ur might give one good tug and watch as its removed any other questions let me know

qbansir · 07-16-2008, 11:18 AM

is there any way to bypass the check engine light on OBD2 vehicles?

Bennyboy1717 · 11-07-2009, 05:27 PM

you could get a JDM obd2 ECU . . . they dont throw codes for charcoal can removal . . . im runnin a JDM p73 ITR ecu . . . no codes

EM1 Resto · 11-07-2009, 07:04 PM

Quote:

Originally Posted by spoon93

all you have to do is get in a good stance grip the canister with both hands but make sure you have a good grip and with all ur might give one good tug and watch as its removed any other questions let me know

After you remove the one 10mm bolt lol

03-31-2008, 03:25 PM	#2
bigsyke Junior Member Join Date: Jan 2008 Location: Liberal City Posts: 484	I wouldnt remove it, I did, and if your not chipped you will throw a cel for the solenoid. Plus your mpg may go down. After months of searching for a fix, it was a fact its better to leave it on, for many reasons other than emissions. __________________ Security > Form Keep your car "Official bring NOFX back #02 If yOu AiNt, TaLkIn BoUt MoNeY YoU AiTt TaLkIn BoUt ShIt http://is.rely.net/1-92-30008-l-au16...EFX98SjN8A.gif

03-31-2008, 03:27 PM	#3
z06eateR Junior Member 1995 Acura Integra My Garage Join Date: Mar 2008 Location: WeR VtEc PoPs & NeVeR sToPs...D.V.C- sOcAl Posts: 575	Re: (bigsyke) not to be a dick...but did u even read what i wrote?? i am already jumped to obd1 on a chipped p28... what other problems would it cause?? i removed the one from my dc2..but thats turbo... and already obd1.. so im trying to see whats up wit the obd2 shit..even if i am chipped obd1 __________________ WHEELS FS/FT- http://hondamarketplace.com/showthread.php?t=2660504 MY FS THREAD - http://www.hondamarketplace.com/show....php?t=2647993 D.V.C ALL DAY EVERYDAY! REP'N 805! I <3 JDM HOES

03-31-2008, 03:40 PM	#4
stock.gsr Junior Member Join Date: Mar 2007 Location: RI, USA Posts: 80	Re: (z06eateR) There's really nothing to it, i just removed it and connected the vent tube from the tank to the line that exits the bottom of the can (which just vents outside the engine bay), cap off the vac lines (if i remember correctly) and your done. As long as you're obd1, especially a p28, you're all set. __________________ Present: 92 EG Past: 00 DC2 GSR Dan Rothfeld Photography

03-31-2008, 03:41 PM	#5
z06eateR Junior Member 1995 Acura Integra My Garage Join Date: Mar 2008 Location: WeR VtEc PoPs & NeVeR sToPs...D.V.C- sOcAl Posts: 575	Re: (stock.gsr) RIGHT ON!!! THNX BRO! __________________ WHEELS FS/FT- http://hondamarketplace.com/showthread.php?t=2660504 MY FS THREAD - http://www.hondamarketplace.com/show....php?t=2647993 D.V.C ALL DAY EVERYDAY! REP'N 805! I <3 JDM HOES

04-04-2008, 08:34 PM	#6
spoon93 Junior Member Join Date: Aug 2007 Location: moorpark, ca Posts: 493	Re: (z06eateR) all you have to do is get in a good stance grip the canister with both hands but make sure you have a good grip and with all ur might give one good tug and watch as its removed any other questions let me know

07-16-2008, 11:18 AM	#7
qbansir Junior Member Join Date: Jun 2008 Location: Riverside, California Posts: 123	Re: (spoon93) is there any way to bypass the check engine light on OBD2 vehicles?

11-07-2009, 05:27 PM	#8
Bennyboy1717 Junior Member Join Date: Jun 2006 Location: Omaha, NE, USA Posts: 13	Re: b16a2 em1 charcoal canister removal??? help.. you could get a JDM obd2 ECU . . . they dont throw codes for charcoal can removal . . . im runnin a JDM p73 ITR ecu . . . no codes

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search