Honda and Acura Model Specific Forums

ryansouthman · 10-07-2009, 07:02 PM

Hey Guys, i have a 2002 honda DC5 Integra with a K20A3 engine, i've busted my crank and looking for one to buy, also i'm searching for a part number listing for this engine including the sensors, all assistance is appreciated.

thank you

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

Type-'S'paz · 10-07-2009, 07:17 PM

junk the engine and swap it while it's broken~!

ryansouthman · 10-07-2009, 07:24 PM

i think so but funds low right now, so just looking to replace the crank for now.

dc5mizz · 11-02-2009, 06:18 PM

just trying going to the dealer and asking them

kPRO dz · 11-03-2009, 02:25 AM

how did you manage to damage the crank anyway?

Type-'S'paz · 11-03-2009, 06:43 AM

Quote:

Originally Posted by Rude Awakening

gay.

What do you have guy? Hope something way better than me so you can make jokes

nahonda04 · 11-03-2009, 07:19 AM

he has a bunch of infractions, maybe he wants another one!?

Rude Awakening · 11-03-2009, 08:00 AM

Quote:

Originally Posted by Type-'S'paz

What do you have guy? Hope something way better than me so you can make jokes

I have a car that I prefer, but the car isn't the issue. It's how you're making it sound like it's something else.

Honda Integra A Spec Type S.

I mean, really? REALLY?

I could swear it was Acura RSX Type S. The A-Spec kit doesn't add to the name either. I thought that people doing that shit stopped in like 2002?

hawaiiancb74 · 11-03-2009, 09:54 AM

lol ok,any who if you managed to mess up the crank the whole motor is going to have to be disassembled to be replaced, fyi that cost about the same as finding a new motor. ide like to know what the heck you did that could have caused damage to the crank. spun a bearing? in that case your looking at crank, new bearings and possibly new rods and prolly a new oil pump because of debris.

part numbers in the US parts catalog and prices listed in USD
part number for assembled engine block: 10002-PND-A14 GENERAL ASSY., CYLINDER BLOCK $3916.69
part number for knock sensor: 30530-PPL-A01 SENSOR, KNOCK $51.15
part number for oil pressure switch: 37240-PT0-014 SWITCH, OIL PRESSURE (TEC) $20.33
part number for crankshaft: 13310-PNA-000 CRANKSHAFT $869.00
part number for crank sensor:37500-PNB-003 SENSOR ASSY., CRANK $82.55

hawaiiancb74 · 11-03-2009, 09:57 AM

i would just swap in a k20a2 if you have a 5 speed trans, if you have an auto im sorry.

nahonda04 · 11-03-2009, 03:40 PM

Quote:

Originally Posted by Rude Awakening

I have a car that I prefer, but the car isn't the issue. It's how you're making it sound like it's something else.

Honda Integra A Spec Type S.

I mean, really? REALLY?

I could swear it was Acura RSX Type S. The A-Spec kit doesn't add to the name either. I thought that people doing that shit stopped in like 2002?

doesn't matter, your post has nothing to do with the thread in question...you have something to say to him, take it to the pm's

mannydc5 · 11-03-2009, 04:05 PM

Quote:

Originally Posted by hawaiiancb74

lol ok,any who if you managed to mess up the crank the whole motor is going to have to be disassembled to be replaced, fyi that cost about the same as finding a new motor. ide like to know what the heck you did that could have caused damage to the crank. spun a bearing? in that case your looking at crank, new bearings and possibly new rods and prolly a new oil pump because of debris.

part numbers in the US parts catalog and prices listed in USD
part number for assembled engine block: 10002-PND-A14 GENERAL ASSY., CYLINDER BLOCK $3916.69
part number for knock sensor: 30530-PPL-A01 SENSOR, KNOCK $51.15
part number for oil pressure switch: 37240-PT0-014 SWITCH, OIL PRESSURE (TEC) $20.33
part number for crankshaft: 13310-PNA-000 CRANKSHAFT $869.00
part number for crank sensor:37500-PNB-003 SENSOR ASSY., CRANK $82.55

Hawaiiancb74 coming thru like always..

bro..

turboteg2nv · 11-04-2009, 05:38 AM

Quote:

Originally Posted by Rude Awakening

I have a car that I prefer

...and a daughter that you neglect. How about you pay child support, you piece of sh!t?

Go play some more xbox.

to OP - x2 for just replacing the motor. If you're dead set on just replacing the crank, look for a parts on k20a.org. People are parting out motors all the time, shouldn't be hard to find one for cheap. But again, you'll have to get everything machined so it's fresh and you'll still need to rebuild everything from the ground up. Good luck

VTEC79 · 11-12-2009, 10:32 AM

What is the difference between DC5 integra-R and DC5 RSX-S engines?
I know integra has 220HP, RSX has 203HP, why?

josh's ep3 · 11-12-2009, 10:39 AM

Please, do some research. It has been covered a ridiculous amount of times. Google it and you will see.

VTEC79 · 11-12-2009, 11:06 AM

Quote:

Originally Posted by josh's ep3

Please, do some research. It has been covered a ridiculous amount of times. Google it and you will see.

hi josh's ep3!
Where I can write this question?

What is the difference between DC5 integra-R and DC5 RSX-S engines?
I know integra has 220HP, RSX has 203HP, why?

I can't find similar thread

mustclime · 11-12-2009, 11:23 AM

Quote:

Originally Posted by josh's ep3

Please, do some research. It has been covered a ridiculous amount of times. Google it and you will see.

josh's ep3 · 11-12-2009, 12:08 PM

Quote:

Originally Posted by mustclime

Lol!!

Thanks, I needed that.

10-07-2009, 07:17 PM	#2
Type-'S'paz Member Join Date: Sep 2008 Location: WI, usa Posts: 1,217	Re: DC5 integra junk the engine and swap it while it's broken~! __________________ 05 Integra Type-S K24A2 swap with Jackson Racing Supercharger 315whp 235lb torque www.urbandisturbance.net

10-07-2009, 07:24 PM	#3
ryansouthman New User Join Date: Oct 2009 Posts: 2	Re: DC5 integra i think so but funds low right now, so just looking to replace the crank for now.

11-02-2009, 06:18 PM	#4
dc5mizz Join Date: Nov 2009 Posts: 8	Re: DC5 integra just trying going to the dealer and asking them

11-03-2009, 02:25 AM	#5
kPRO dz Junior Member Join Date: Feb 2008 Location: Ellicott City MD Posts: 196	Re: DC5 integra how did you manage to damage the crank anyway? __________________ i/h/e/kpro superduper charged soon to come!

11-03-2009, 09:54 AM	#9
hawaiiancb74 Junior Member Join Date: Feb 2006 Location: Springfield, Ohio, United States Posts: 738	Re: DC5 integra lol ok,any who if you managed to mess up the crank the whole motor is going to have to be disassembled to be replaced, fyi that cost about the same as finding a new motor. ide like to know what the heck you did that could have caused damage to the crank. spun a bearing? in that case your looking at crank, new bearings and possibly new rods and prolly a new oil pump because of debris. part numbers in the US parts catalog and prices listed in USD part number for assembled engine block: 10002-PND-A14 GENERAL ASSY., CYLINDER BLOCK $3916.69 part number for knock sensor: 30530-PPL-A01 SENSOR, KNOCK $51.15 part number for oil pressure switch: 37240-PT0-014 SWITCH, OIL PRESSURE (TEC) $20.33 part number for crankshaft: 13310-PNA-000 CRANKSHAFT $869.00 part number for crank sensor:37500-PNB-003 SENSOR ASSY., CRANK $82.55 __________________ http://www.myspace.com/sumobros DC5 Squad #3

11-03-2009, 09:57 AM	#10
hawaiiancb74 Junior Member Join Date: Feb 2006 Location: Springfield, Ohio, United States Posts: 738	Re: DC5 integra i would just swap in a k20a2 if you have a 5 speed trans, if you have an auto im sorry. __________________ http://www.myspace.com/sumobros DC5 Squad #3

11-12-2009, 10:32 AM	#14
VTEC79 Join Date: Nov 2007 Location: Tbilisi, Georgia Posts: 6	Re: DC5 integra What is the difference between DC5 integra-R and DC5 RSX-S engines? I know integra has 220HP, RSX has 203HP, why? __________________ ..::HONDA CLUB GEORGIA::.. I can't speak English well

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search