Honda and Acura Model Specific Forums

www.megameet.org · 09-18-2009, 03:13 PM

Few more pics. Trimmed some more, pre fit, did some nicer dremel work and a lot more trimming after these pics. Will work on brackets next.....

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

HatchVX · 09-18-2009, 03:26 PM

looking good. Did you weld up the box yourself or did you buy it?

qwrty · 09-18-2009, 05:15 PM

B U M P !!
looks GOOD...

www.megameet.org · 09-19-2009, 10:40 AM

I built it! It is plastic, so yes, my certified co-worker did the plastic welds

After the final fit, and brackets are made, the whole thing will be trimmed in rubber.

You know I have looked, and I cant find anyone who has done this on there own before!

qwrty · 09-20-2009, 03:38 PM

put heat shields on the outer surface to further reduce hot air
goin thru inside the panel or making the case itself hot...

www.megameet.org · 09-20-2009, 08:40 PM

I am still throwing around idea's to insilate it. Maybe dynomat, maybe nothing, I will ahve to test it to see after it is finaled fit wise. I need to get one of those temp pens to do measurements before and after.

fast2camciv · 09-21-2009, 06:39 AM

Looking good sir

www.megameet.org · 09-21-2009, 09:34 AM

thanks to all

909Dc2Racer · 09-30-2009, 02:55 PM

looks good

www.megameet.org · 09-30-2009, 07:56 PM

I appreciate it! I finally decided on what rubber to use as the trim around it to make it look "store bought"....the hood wiper cowl rubber off the crv! It is the exact same looking trim as the one on my friends trd 98 ttsupra, and his trd camry.

qwrty · 10-01-2009, 08:10 PM

Quote:

Originally Posted by www.megameet.org

I appreciate it! I finally decided on what rubber to use as the trim around it to make it look "store bought"....the hood wiper cowl rubber off the crv! It is the exact same looking trim as the one on my friends trd 98 ttsupra, and his trd camry.

i use to see once in a glass/mirror/window shop,
they have those rubber seal gaskets that looks like
the ones on the window of a car or a door seal..?
then insulate the entire casing/housing with thermal pads...
(thermo tec,heat shield//??)

good luck!

btlee · 10-01-2009, 11:35 PM

cool pic!!!!

www.megameet.org · 10-07-2009, 12:12 PM

just ordered a c-pillar bar today

www.megameet.org · 10-15-2009, 10:09 AM

Just started installing the c-pillar bar. More pics to come

www.megameet.org · 10-28-2009, 06:53 AM

finally got my custom honda centre caps on my wheels too! They look so good! Pics after I get back from SEMA

BlueRSTEg · 10-28-2009, 01:27 PM

loks great keep it up.

www.megameet.org · 11-01-2009, 12:24 PM

thanks :D

iluvmyek · 11-02-2009, 01:09 PM

bump...nice crv

jspecb18c · 11-18-2009, 11:01 AM

I know that you are back from SEMA so where are these updated pics you promised us

-Ryan

www.megameet.org · 11-20-2009, 08:29 PM

just finished the c pillar bar. It has been in and functional for a while now, but i just pulled it, sanded and clear coated it, and reinstalled. I also tinted my front bumper reflectors. Replacing a section of the exaust on sunday to fix the crv double exaust pipe rattle.

Oh! I also just sanded my headlights down. 500-2000 grit, and polished. They look almost brand new!

ARMED · 11-20-2009, 08:36 PM

i did the same thing....
after sanding it...i used some rubbing compound
then plastix.....
looks brand new

qwrty · 11-20-2009, 09:02 PM

where/what site did you ordered the neuspeed strut bars??
di they carry cusco too?? im having issues w/ my strut bars
since im using an extended top hats. its hitting the bar itself...
btw im using the "mu gen" strut bars same as godspeeds'

HatchVX · 11-21-2009, 09:51 AM

I would spray the headlights with a clearcoat. They will look good then it would clould up again.

09-18-2009, 03:26 PM	#202
HatchVX Junior Member 1992 Honda Civic My Garage Join Date: Sep 2003 Location: Fredericksburg, VA, USA Posts: 403	Re: www.MegaMeet.org's Build Thread looking good. Did you weld up the box yourself or did you buy it? __________________ CHEAP EG PARTS My EG build up

09-18-2009, 05:15 PM	#203
qwrty Junior Member Join Date: Jul 2008 Location: tri state (ny-nj) Posts: 559	Re: www.MegaMeet.org's Build Thread B U M P !! looks GOOD... __________________ .....under pressure borrowed qoute: " anything with [H] under the hood has a lot of potentials...."

09-19-2009, 10:40 AM	#204
www.megameet.org Junior Member Join Date: Jan 2006 Location: In UR Dash Posts: 797	Re: www.MegaMeet.org's Build Thread I built it! It is plastic, so yes, my certified co-worker did the plastic welds After the final fit, and brackets are made, the whole thing will be trimmed in rubber. You know I have looked, and I cant find anyone who has done this on there own before! __________________ \|O\==H==/O\| www.MegaMeet.org Head of Operations, Logistics and Security

09-20-2009, 03:38 PM	#205
qwrty Junior Member Join Date: Jul 2008 Location: tri state (ny-nj) Posts: 559	Re: www.MegaMeet.org's Build Thread put heat shields on the outer surface to further reduce hot air goin thru inside the panel or making the case itself hot... __________________ .....under pressure borrowed qoute: " anything with [H] under the hood has a lot of potentials...."

09-20-2009, 08:40 PM	#206
www.megameet.org Junior Member Join Date: Jan 2006 Location: In UR Dash Posts: 797	Re: www.MegaMeet.org's Build Thread I am still throwing around idea's to insilate it. Maybe dynomat, maybe nothing, I will ahve to test it to see after it is finaled fit wise. I need to get one of those temp pens to do measurements before and after. __________________ \|O\==H==/O\| www.MegaMeet.org Head of Operations, Logistics and Security

09-21-2009, 06:39 AM	#207
fast2camciv Member Join Date: Jan 2003 Location: Nampa, Idaho Posts: 1,529	Re: www.MegaMeet.org's Build Thread Looking good sir __________________ 1998 Lexus GS400 Low & Slow 94 Integra GSR 4dr 11.1 @ 130 490whp -sold- 93 Civic 4dr Vitara'd SOHC 11.43 @ 127 405whp -sold-

09-21-2009, 09:34 AM	#208
www.megameet.org Junior Member Join Date: Jan 2006 Location: In UR Dash Posts: 797	Re: www.MegaMeet.org's Build Thread thanks to all __________________ \|O\==H==/O\| www.MegaMeet.org Head of Operations, Logistics and Security

09-30-2009, 02:55 PM	#209
909Dc2Racer Junior Member Join Date: May 2007 Location: Tha 909, Ca Posts: 394	Re: www.MegaMeet.org's Build Thread looks good __________________ WANT TO BUY 2 ROTA'S - MY FOR SALE THREAD Paint Jobs and Wire Tuck's Just hit Me Up

09-30-2009, 07:56 PM	#210
www.megameet.org Junior Member Join Date: Jan 2006 Location: In UR Dash Posts: 797	Re: www.MegaMeet.org's Build Thread I appreciate it! I finally decided on what rubber to use as the trim around it to make it look "store bought"....the hood wiper cowl rubber off the crv! It is the exact same looking trim as the one on my friends trd 98 ttsupra, and his trd camry. __________________ \|O\==H==/O\| www.MegaMeet.org Head of Operations, Logistics and Security

10-01-2009, 11:35 PM	#212
btlee New User Join Date: Aug 2009 Posts: 6	Re: www.MegaMeet.org's Build Thread cool pic!!!!

10-07-2009, 12:12 PM	#213
www.megameet.org Junior Member Join Date: Jan 2006 Location: In UR Dash Posts: 797	Re: www.MegaMeet.org's Build Thread just ordered a c-pillar bar today __________________ \|O\==H==/O\| www.MegaMeet.org Head of Operations, Logistics and Security

10-15-2009, 10:09 AM	#214
www.megameet.org Junior Member Join Date: Jan 2006 Location: In UR Dash Posts: 797	Re: www.MegaMeet.org's Build Thread Just started installing the c-pillar bar. More pics to come __________________ \|O\==H==/O\| www.MegaMeet.org Head of Operations, Logistics and Security

10-28-2009, 06:53 AM	#215
www.megameet.org Junior Member Join Date: Jan 2006 Location: In UR Dash Posts: 797	Re: www.MegaMeet.org's Build Thread finally got my custom honda centre caps on my wheels too! They look so good! Pics after I get back from SEMA __________________ \|O\==H==/O\| www.MegaMeet.org Head of Operations, Logistics and Security

10-28-2009, 01:27 PM	#216
BlueRSTEg Junior Member 1992 Acura Integra Join Date: Mar 2009 Location: Seattle, WA Posts: 67	Re: www.MegaMeet.org's Build Thread loks great keep it up. __________________ *1992 Acura Integra RS*. JDM B18B, AEM CAI, Tanabe HM Exhaust, Chrome Headers, Upper Strut Bar, Stage 1 Clutch, Light FlyWheel, Good Sound System.

11-01-2009, 12:24 PM	#217
www.megameet.org Junior Member Join Date: Jan 2006 Location: In UR Dash Posts: 797	Re: www.MegaMeet.org's Build Thread thanks :D __________________ \|O\==H==/O\| www.MegaMeet.org Head of Operations, Logistics and Security

11-02-2009, 01:09 PM	#218
iluvmyek Junior Member Join Date: Nov 2005 Location: SO CAL, CA, USA Posts: 888	Re: www.MegaMeet.org's Build Thread bump...nice crv

11-18-2009, 11:01 AM	#219
jspecb18c Junior Member Join Date: Oct 2004 Location: Stafford, VA, USA Posts: 240	Re: www.MegaMeet.org's Build Thread I know that you are back from SEMA so where are these updated pics you promised us -Ryan __________________ http://img.photobucket.com/alb...5.jpg

11-20-2009, 08:29 PM	#220
www.megameet.org Junior Member Join Date: Jan 2006 Location: In UR Dash Posts: 797	Re: www.MegaMeet.org's Build Thread just finished the c pillar bar. It has been in and functional for a while now, but i just pulled it, sanded and clear coated it, and reinstalled. I also tinted my front bumper reflectors. Replacing a section of the exaust on sunday to fix the crv double exaust pipe rattle. Oh! I also just sanded my headlights down. 500-2000 grit, and polished. They look almost brand new! __________________ \|O\==H==/O\| www.MegaMeet.org Head of Operations, Logistics and Security

11-20-2009, 08:36 PM	#221
ARMED Junior Member Join Date: Jul 2004 Location: www.hondaclub.com.ph/forums, pinas Posts: 343	Re: www.MegaMeet.org's Build Thread i did the same thing.... after sanding it...i used some rubbing compound then plastix..... looks brand new __________________ GAMOL

11-20-2009, 09:02 PM	#222
qwrty Junior Member Join Date: Jul 2008 Location: tri state (ny-nj) Posts: 559	Re: www.MegaMeet.org's Build Thread where/what site did you ordered the neuspeed strut bars?? di they carry cusco too?? im having issues w/ my strut bars since im using an extended top hats. its hitting the bar itself... btw im using the "mu gen" strut bars same as godspeeds' __________________ .....under pressure borrowed qoute: " anything with [H] under the hood has a lot of potentials...."

11-21-2009, 09:51 AM	#223
HatchVX Junior Member 1992 Honda Civic My Garage Join Date: Sep 2003 Location: Fredericksburg, VA, USA Posts: 403	Re: www.MegaMeet.org's Build Thread I would spray the headlights with a clearcoat. They will look good then it would clould up again. __________________ CHEAP EG PARTS My EG build up

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search